Paper and Material Roll Lifting Solutions

5T Ceiling-Mounted Rail with Air Balancer and Fabric Roll Clamp

A ceiling-mounted 5T rail rated for 200 kg, a 200 kg air balancer, and a fabric-roll clamp tool together form a light-touch roll lifting system that avoids wrinkling or scratching the fabric. Installation photo album included.

Custom-Built Roll Core Shaft Cart for Packaging Plants

The roll core shaft cart is custom-designed by FullSharp to match a packaging plant's process. The multi-angle photo album shows the core shaft, the lifting mechanism, and how the cart keeps the roll balanced while moving.

500kg Jib Crane with Electric Hoist and Core Shaft Tool for Upending Rolls

A 500 kg jib crane fitted with an electric hoist and a core shaft tool to upend rolls from horizontal to vertical. The tool inserts directly into the core, holding the roll firmly throughout lifting and turning.

Stainless Electric Lifter Automatically Lifts, Tilts and Holds Coils

A stainless-steel-bodied electric lifter that lifts, tilts, and holds coils automatically by electric power. The rust-resistant unit suits the printing, paper, and textile industries. The photo album documents the unit during test operation.

Goodlifta Electric Lifter for Film Rolls in Cleanrooms

Goodlifta electric lifter with a stainless steel body and a roll-handling head for film rolls used in cleanrooms. The installation photo album documents the lifter placing rolls inside a clean production area.

300 kg Electric Roll Clamp Lifter with On-Spot Tilting

A 300 kg electric roll clamp lifter with a tilting clamp head that turns a roll from horizontal to vertical right on the spot. The photo album shows a range of actual roll-handling situations.

Pneumatic Manipulator for Lifting and Tilting Rolls

A pneumatic manipulator that grips, lifts, and tilts rolls right at the work position, with just one operator needed. The photo album shows the roll-clamping head and how it runs.

5T Rail (200 kg) with Air Balancer and Fabric Roll Clamp

A 5T rail rated at 200 kg with a FullSharp air balancer and fabric roll clamp lifts heavy rolls light-handed and places them precisely. Photo album of real installation at a textile mill.

Overhead Rail with Air Balancer and Fabric Roll Clamp

An overhead rail carrying a FullSharp air balancer and a fabric roll clamp lifts and moves rolls smoothly, keeping the floor clear. Photo album of real installation at a facility.

500 kg Rail Frame Kit with Lifting Hoist

A 500 kg rail frame kit with hoist, freestanding right where lifting is needed, moving loads along a fixed route. Photo album of real installation at a production facility.

GoodLifta Walk-Behind Electric Stacker for Material Roll Lifting

The GoodLifta walk-behind electric stacker comes with roll clamp forks, letting one person lift and load material rolls into production machines. See the photo album of real installation and operation in a paper mill.

Material Roll Lifting Tool for Production Lines

A material roll lifting tool grips paper, steel, and fabric rolls firmly during lifting and fits directly onto an existing jib crane. The installation photo album shows actual use on a production line.

Dual-Point Hook Tool for Lifting Material Rolls

A dual-point hook tool hooks directly into the roll core to lift steel, paper, or fabric rolls using your existing hoist and crane. The photos show the tool body, the two hook ends, and the lifting point.

Manipulator with Airshaft Clamp for Removing Shafts from Material Rolls

An articulating manipulator clamps the airshaft and pulls it out of the material roll core. The installation photo album shows the shaft clamp head and the removal in action right at the machine.

Goodlifta Walkie Electric Stacker for Lifting Material Rolls

Goodlifta walkie electric stacker with a dedicated lifting shaft, moving material rolls between the warehouse and the machine. Real photo album of the equipment supplied and handed over by FullSharp.

5T Rail Jib Crane, Wall-Mounted, with Roll Lifting Tool

5T rail jib crane mounted on the wall, 200 kg rated load, fitted with a dedicated roll lifting tool to lift and rotate material rolls into the machine. Includes a real installation photo album.

Push-Type Electric Lifter for Cleanrooms, Lifting and Tilting Material Rolls 90 Degrees

A hand-push electric lifter for cleanrooms, lifting material rolls and tilting them 90 degrees to load them onto a machine in the right orientation. The installation photo album shows the roll clamp forks and the tilting mechanism.

5T 200kg Rail with Air Balancer and Roll Clamp Tool

A 5T rail system rated at 200 kg carries a FullSharp air balancer fitted with a roll clamp tool, for light, secure handling of material rolls. Photo album of the actual installation at the customer's production area.

Articulating Jib Crane with a Roll Lifting and Tilting Tool

An articulating jib crane fitted with an air balancer and a roll lifting and tilting tool, turning a roll from lying to standing in mid-air. Photo gallery from an actual installation.

Goodlifta Walkie Electric Lifter with Dual-Edge Roll Clamp

Goodlifta walkie electric lifter fitted with a clamp that grips both edges of a material roll, lifting electrically and moving flexibly. Photo album from an actual installation in a factory.

Manipulator on ABUS Rail for Workshops

A manipulator suspended on an ABUS rail, lifting with light effort and precise positioning, letting one person handle the whole cycle. See the real installation photo album at the workshop.

Overhead Rail and Electric Hoist for Lifting Material Rolls

An overhead rail combined with an electric hoist and a roll-hanging fork, lifting paper, fabric, or plastic rolls and moving them along the rail to the machine. See real installation photos from the plant.

Pneumatic Manipulator for Roll Lifting with Roll-Turning Motor, 250 kg

Pneumatic manipulator lifts material rolls up to 250 kg, with an electric motor that tilts rolls between upright and horizontal. A solution for paper, printing, and packaging plants. Includes a photo gallery of actual installations.