Hoist Frame Kit, 500 kg Freestanding Rail for Rolls

FullSharp built a 500 kg rail frame kit that stands freely on the floor with a hoist running along the rail, for roll lifting in a leased building whose light steel roof cannot carry a suspended load. All the load goes down the frame legs, and the hoist can be electric or hand chain type depending on how often the site lifts.

Not every factory roof can bear a suspended load, especially in leased buildings or those with lightweight steel roofing. Yet that area may still need to lift half-tonne loads and move them along a fixed route.

FullSharp builds a 500 kg rail frame kit that stands freely on the floor, with a hoist running along the rail. The entire load transfers down through the frame legs, never touching the roof structure. The hoist can be electric or hand chain type, depending on how often the facility needs to lift.

500 kg Rail Frame Kit with Lifting Hoist

A 500 kg rail frame kit with lifting hoist installed in a production area.

Equipment Installed

Load-bearing steel frame: stands freely on the floor, transfers no load to the roof structure.
500 kg rail: runs the full working route at a 500 kg load capacity.
Lifting hoist: electric or hand chain type selected by actual lifting frequency.
Trolley brackets and supports: connect the rail to the frame, tightened firmly and inspectable on a regular schedule.

Key Specifications

Rail system load capacity500 kg

Benefits for Your Facility

No load on the roof structure

Suits leased facilities or lightweight steel roofing that cannot bear a suspended load.

Quick, compact setup

A moderate-sized structure fits into limited space with minimal disruption to production.

Budget-friendly

Lighter than a double-girder crane, yet enough for small to medium lifting needs.

Actual Installation Photos

500 kg Rail Frame Kit with Lifting Hoist - photo 1

500 kg Rail Frame Kit with Lifting Hoist - photo 2

500 kg Rail Frame Kit with Lifting Hoist - photo 3

500 kg Rail Frame Kit with Lifting Hoist - photo 4

500 kg Rail Frame Kit with Lifting Hoist - photo 5

500 kg Rail Frame Kit with Lifting Hoist - photo 6

500 kg Rail Frame Kit with Lifting Hoist - photo 7

500 kg Rail Frame Kit with Lifting Hoist - photo 8

500 kg Rail Frame Kit with Lifting Hoist - photo 9

500 kg Rail Frame Kit with Lifting Hoist - photo 10

500 kg Rail Frame Kit with Lifting Hoist - photo 11

500 kg Rail Frame Kit with Lifting Hoist - photo 12

500 kg Rail Frame Kit with Lifting Hoist - photo 13

500 kg Rail Frame Kit with Lifting Hoist - photo 14

500 kg Rail Frame Kit with Lifting Hoist - photo 15

500 kg Rail Frame Kit with Lifting Hoist - photo 16

500 kg Rail Frame Kit with Lifting Hoist - photo 17

500 kg Rail Frame Kit with Lifting Hoist - photo 18

500 kg Rail Frame Kit with Lifting Hoist - photo 19

500 kg Rail Frame Kit with Lifting Hoist - photo 20

500 kg Rail Frame Kit with Lifting Hoist - photo 21

Click a photo to enlarge. Album of 21 photos taken on site.

Suitable Applications

Mechanical workshops, component manufacturing
Warehouses and distribution centers
Assembly lines, machine maintenance
Fixed-route roll lifting areas

Frequently asked questions

Can I install a rail hoist if the roof is weak?

Yes, on a freestanding frame. The load goes through the legs to the floor and never touches the roof, which suits leased buildings.

Electric hoist or hand chain hoist?

An electric hoist suits frequent lifting; a hand chain hoist is enough when lifts are occasional. FullSharp recommends based on how often the site actually lifts.

What load does the frame kit carry?

The rail system in this project is rated at 500 kg. FullSharp sizes the frame and route to the real rolls. Heavier loads need a stronger frame and hoist.

Similar projects

Consultation for Your Facility

FullSharp measures the installation area, the load to be lifted, and the foundation supporting the frame legs. Our engineers finalize the frame span, rail length, and suitable hoist type. FullSharp then fabricates, erects, and load-tests the system before handover.

Contact for a site survey and quote View completed projects

500 kg freestanding rail frame kit with a hoist for roll lifting in leased buildings