VN EN TW
FullSharp
Vietnam+84 332 839 268Taiwan+886 3 451 8806Send requestreply in 24 h
About
Equipment
What do you need to lift
Completed projects
Catalogue
Contact
VNENTW
FullSharp · since 1991

FullSharp installed a steel rail suspended from the ceiling with rods and mounting plates bolted into the structural beams, carrying a 200 kg KITO hoist on a trolley, for a cramped upper-floor production area. The load runs entirely through the ceiling so the floor stays clear, and the worker simply pushes the trolley along the fixed lifting line.

Production areas on upper floors are often cramped and can't accommodate extra floor-mounted stands. Every square meter of floor is needed for machines and walkways, while lifting still has to happen continuously along a fixed line.

FullSharp installs a steel rail suspended from the ceiling using a system of suspension rods and mounting plates bolted into the structural beams, then hangs a 200 kg KITO hoist on the trolley. The load runs entirely through the ceiling, the floor stays clear, and the worker simply pushes the trolley along the rail and presses the lift button.

Ceiling-Mounted Rail with 200kg KITO Hoist

Ceiling-mounted steel rail with a 200kg KITO hoist running along the working line inside the workshop.

Installed Equipment

  • Load-rated steel rail: sized for the working load, coated with anti-rust paint, running the full length of the lifting line.
  • Suspension rods and mounting plates: bolted securely into concrete ceilings or structural beams, distributing the load evenly across each support point.
  • Rail trolley: rolls smoothly and stably, gliding the hoist to the working point with a light push.
  • 200 kg KITO hoist: lifts and lowers gently and precisely, suited for repetitive tasks throughout the shift.
  • End stops: fitted at both ends of the rail, keeping the trolley within its safe travel range.

Key Specifications

  • KITO hoist capacity200 kg
  • Mounting typeCeiling-suspended with rods and mounting plates

Benefits for Your Plant

Clear floor space

No support columns on the floor, giving more freedom to arrange machinery and walkways.

Safe on upper floors

The rail and support spacing are calculated from the actual ceiling structure, running reliably even on higher floors.

Runs the full line

The trolley covers the entire rail length, so one system serves multiple consecutive working points.

Actual Installation Photos

Ceiling-Mounted Rail with 200kg KITO Hoist - photo 1 Ceiling-Mounted Rail with 200kg KITO Hoist - photo 2 Ceiling-Mounted Rail with 200kg KITO Hoist - photo 3

Click a photo to enlarge. Album of 3 photos taken on site.

Suitable Applications

  • Workshops and assembly areas located on upper floors
  • Areas lifting light loads up to 200kg along a fixed line
  • Labs, machine shops, and equipment maintenance areas
  • Locations needing ceiling mounting to keep floor space clear

Related Products and Projects

Frequently asked questions

Can a hoist rail be hung from a concrete ceiling?

Yes. Suspension rods and mounting plates are bolted into concrete ceilings or structural beams and spread the load across each support point.

Why is a ceiling rail good for upper floors?

Upper floors are often cramped. With no support columns, every square meter of floor stays available for machines and walkways.

What capacity is the hoist?

The KITO hoist in this project is rated at 200 kg. FullSharp sizes the steel rail, rods and mounting plates to the working load and the ceiling structure.

Similar projects

Consulting for Your Plant

FullSharp checks the ceiling structure, beam locations, and clear height before finalizing support spacing. Our engineers calculate the rail length based on your actual working line and select the right hoist capacity. We then install, run a test, and provide on-site warranty support.

Contact Us for a Site Survey and QuoteView Completed Projects