5T Steel Rail (200 kg Load) Installation Projects

200kg Rail with Lifts All Vacuum Lifter for Carton Boxes

A ceiling-mounted rail beam system rated for a 200 kg working load, carrying a Lifts All pneumatic vacuum lifter built for carton boxes. The installation photo album shows the rail line covering the pallet, conveyor, and cart areas in the warehouse.

Ceiling-Mounted Rail with 200kg KITO Hoist

A steel rail suspended from the ceiling with rods and mounting plates, carrying a 200 kg KITO hoist that travels along the working line. The floor stays completely clear, making it suitable even for production areas on upper floors.

5T Ceiling-Mounted Rail with Air Balancer and Fabric Roll Clamp

A ceiling-mounted 5T rail rated for 200 kg, a 200 kg air balancer, and a fabric-roll clamp tool together form a light-touch roll lifting system that avoids wrinkling or scratching the fabric. Installation photo album included.

5T Overhead Rail with 11 Hoists on the Same Line

5T overhead rail rated at 200 kg, carrying 11 hoists along the same line, with each station having its own lifting point so the production line runs in parallel without waiting on each other. Installation photo album included.

Overhead Rail with KITO 200kg Hoist on an Upper Floor

Overhead rail with a KITO 200 kg hoist, its suspension rods fixed to the concrete ceiling or structural beams. The system was installed on the 4th floor, where floor space is tight and overhead space needed to be put to use.

5T Overhead Rail with Taiwanese Electric-Drive Hoist System

5T overhead rail rated at 200 kg, with an electric trolley and hoist built to Taiwanese technology. Push-button lifting and lowering, smooth travel along the line, and a clear floor below. Installation photo album included.

Wall-Mounted 5T Rail for Wall-Adjacent Work Routes

A 5T rail mounted on the wall with a bracket system, 200 kg rated load, with a trolley and hoist traveling the full length of a wall-adjacent work route without taking up aisle space. Real installation photo album.

5T Horizontally-Mounted Rail with ENDO Pneumatic Assist

A horizontally-mounted 5T rail (200 kg rated load) runs the length of a long work route, combined with an ENDO pneumatic assist so lifting and lowering take only a very light touch. Installation photo album at the workshop.

5T Ceiling-Mounted Rail with Electric Hoist and Hand-Pulled Trolley

A ceiling-mounted 5T rail (200 kg rated load) with an electric hoist for lifting, while the trolley moves along the rail by hand. Skipping one motor keeps the cost down. Real installation photo album.

5T Ceiling-Mounted Rail with Electric Hoist and Manual Rotating Vacuum-Clamp Tool

5T ceiling-mounted rail rated at 200 kg, fitted along the line with an electric hoist, a pneumatic cylinder for stroke adjustment, and a manually rotating vacuum-clamp tool. One operator handles the entire cycle. Installation photo album included.

5T Rail Frame with 200 kg Air Balancer for Handling Motorcycle Motors

A 5T rail frame carries a Knight Global 200 kg air balancer for the motorcycle motor assembly stage. The motor floats at the right height while the worker only guides its direction. Includes an installation photo album at the factory.

5T Rail and 200 kg Vacuum Tube Lifter for Carton Boxes

A 5T rail frame carries a FullSharp vacuum tube lifter dedicated to carton boxes, rated at 200 kg per branch. Boxes stay dent-free, and one operator can stack pallets through a full shift. Includes an installation photo album at the warehouse.

5T Rail 200 kg with FullSharp Vacuum Lifter and KITO Hoist

A 5T overhead rail rated at 200 kg fitted with a FullSharp vacuum lifter for carton boxes and a KITO hand chain hoist. The installation photo album captures the rail run and the box-lifting operation.

5T 200 kg Rail with COMEUP Hoist and Suction Tool for Iron Doors

A ceiling-mounted 5T 200 kg rail combined with a COMEUP hoist and a pneumatic suction tool dedicated to lifting iron doors. The installation photo album documents the rail run and the actual door-lifting process.

5T 200 kg Rail Frame with Air Balancer and Battery Clamp Tool

A steel frame supporting a 5T 200 kg rail, fitted with a Knight Global air balancer and a battery clamp tool. The installation photo album documents the frame assembly, rail alignment, and load testing.

Single-Column Frame with a 5T Rail, 200 kg, for a Battery Factory

A single-side column frame resting a 5T rail rated at 200 kg, carrying a Knight Global air balancer and battery gripper tool at a battery plant. It occupies only one row of columns, keeping the aisle wide.

Two-Column Rail Frame, 200 kg, with Air Balancer and Battery Gripper Tool

A two-column frame carrying a 200 kg-rated rail, a Knight Global air balancer, and a battery gripper tool. The installation photo album shows the full frame, rail line and gripper assembly during the test run.

5T Overhead Rail, 200 kg, FullSharp Air Balancer for Round Bar Clamping

A 200 kg 5T overhead rail system with a FullSharp air balancer and a pneumatic gripper tool for round bar stock. The worker only pushes lightly to bring the piece to the exact installation position.

5T Overhead Rail, 200 kg, ENDO Hoist, PP Box Gripper Tool

A 200 kg 5T overhead rail with an ENDO pneumatic hoist and a PP box gripper tool for LCD screen boxes, clamping evenly on both sides and lifting very smoothly. Installation photo album at the electronics factory.

5T Overhead Rail, 200 kg, ANVER Side-Suction Carton Lifter

A 200 kg 5T overhead rail combined with an ANVER vacuum tube lifter with side suction for carton boxes, able to pick boxes packed tightly together. Real installation photo album at the customer's warehouse.

5T Rail Freestanding Frame with Vacuum Tube Lifter for Carton Boxes

A freestanding 5T rail support structure on steel columns carrying a FullSharp vacuum tube lifter for carton boxes. Photo album recording everything from erecting the frame to test-running at the factory.

5T Rail 200 kg Carries ANVER Vacuum Lifting Device

A 5T rail system rated at 200 kg carries an ANVER vacuum lifting device for carton boxes, moving goods along the rail with very light effort. Photo album of the actual installation at the customer's warehouse.

Push-Cart Mobile-Base Rail Jib Crane

A rail jib crane on a hand-push mobile base, fitted with a vacuum tube lifter for carton boxes, so it can be rolled to any area and put straight to work. The installation photo album was taken at the customer's factory.

5T Overhead Rail Jib Crane for a Work Station

A 5T overhead rail jib crane rated at 200 kg rotates around its hanging point, covering a whole work corner while keeping the floor clear. Photo album of the actual shop installation.

5T Overhead Rail with ENDO Pneumatic Hoist

An overhead 5T steel rail line paired with a genuine Japanese ENDO pneumatic hoist. The installation album captures the rail line, trolley, control valve, and hoist on site.

Ceiling-Mounted 5T Rail with Air Balancer and Hook Tool

A 5T-rated steel rail line mounted on the ceiling carries an air balancer fitted with a hook tool to lift parts that have lugs or handles. The installation photos capture the rail line, the air balancer, and the hook tool in the workshop.

5T Overhead Rail with KITO Electric Hoist

5T overhead rail rated at 200 kg carries a KITO electric hoist running along the line. Push-button lifting, light-touch pulling, and a clear shop floor. Photo album of the actual installation.

FullSharp 5T Overhead Rail and Vacuum Tube Lifter for Sack Handling

5T overhead rail rated at 200 kg carries a FullSharp vacuum tube lifter to pick up sacks, move them along the rail, and set them down exactly where needed. Photo album of the actual warehouse installation.

200 kg Overhead Steel Rail with Electric Hoist

An overhead 200 kg steel rail line with a push-button electric hoist hanging beneath it. The installation photos show the ceiling anchor points and the hoist traveling along the rail line.

200 kg Steel Rail with FullSharp Vacuum Tube Lifter for Sacks

A ceiling-mounted 200 kg steel rail line carries a FullSharp vacuum tube lifter dedicated to handling sacks. The installation photos capture the rail position and the sack-lifting operation in the warehouse.