Roll Gripping Tool for Jib Cranes and Hoists

FullSharp builds roll lifting tools matched to each workshop's roll diameter and weight and fits them to the jib crane or hoist already in place. The clamp grips the roll core or body and resists slipping and rotation, with a safety lock while loaded, so the roll lands on the shaft first time without dented edges.

Material rolls are heavy, round, and prone to rolling away. Hooking cables or straps around a roll takes time and can distort its edges. Every roll change on a machine also means re-aligning it several times over.

FullSharp builds a roll lifting tool matched to each workshop's roll diameter and weight, fitting it directly onto an existing jib crane or hoist. The clamping mechanism grips the roll's core or body, resisting slippage throughout the lift. The operator only needs to guide the position, without supporting any load.

Material Roll Lifting Tool for Production Lines

A material roll lifting tool hanging from a hoist, gripping a roll at a production workshop.

Equipment installed

Shaft and tool frame: load-bearing steel structure built to match the customer's roll core diameter.
Roll clamping mechanism: grips the roll body firmly, resisting both slipping and rotation while lifting.
Suspension head: connects to the existing jib crane or hoist hook without replacing the lifting system.
Control unit: simple open and close operation for the clamp, with a safety lock while carrying a load.

Benefits for the workshop

No dented roll edges

Clamping force is distributed evenly, so the roll keeps its shape and fewer outer layers need to be discarded.

Faster roll changes

The roll lands on the correct shaft on the first try, cutting down production line downtime.

Reuses existing lifting equipment

The tool attaches to the workshop's current jib crane or hoist, keeping investment cost low.

Actual installation photos

Material Roll Lifting Tool for Production Lines - photo 1

Material Roll Lifting Tool for Production Lines - photo 2

Material Roll Lifting Tool for Production Lines - photo 3

Material Roll Lifting Tool for Production Lines - photo 4

Material Roll Lifting Tool for Production Lines - photo 5

Material Roll Lifting Tool for Production Lines - photo 6

Material Roll Lifting Tool for Production Lines - photo 7

Material Roll Lifting Tool for Production Lines - photo 8

Material Roll Lifting Tool for Production Lines - photo 9

Material Roll Lifting Tool for Production Lines - photo 10

Click a photo to enlarge. Album of 10 photos taken on site.

Suitable applications

Paper and packaging plants
Steel coil and sheet-rolling workshops
Textile production lines with fabric rolls
Roll-form material warehouses

Frequently asked questions

Can a roll clamp be added to my existing jib crane?

Yes. The suspension head connects to the existing jib crane or hoist hook, so there is no need to replace the lifting system, which keeps investment low.

How is the tool sized for my rolls?

The shaft and frame are built to the customer's roll core diameter and weight. FullSharp measures the actual rolls before designing the clamp.

Will clamping dent the roll edges?

Clamping force is spread evenly, so the roll keeps its shape and fewer outer layers need to be discarded. A safety lock keeps the clamp closed while carrying a load.

Similar projects

Consultation for your workshop

FullSharp measures the roll's diameter, width, and weight, and reviews the workshop's existing jib crane system. Our engineers design the tool to match the roll's exact specifications and manufacture it accordingly. The tool is fitted to the lifting system and load-tested before handover.

Custom Roll Lifting Tool That Clamps Material Rolls on an Existing Jib Crane or Hoist