VN EN TW
FullSharp
Vietnam+84 332 839 268Taiwan+886 3 451 8806Send requestreply in 24 h
About
Equipment
What do you need to lift
Completed projects
Catalogue
Contact
VNENTW
FullSharp · since 1991

FullSharp supplies a 1000 kg electric tilting table that turns pallets, molds and material rolls through 90 degrees before they go into the next process. The operator places the load, presses a button outside the tilting area and stands clear, replacing the risky practice of several people prying the load over or tipping it with a forklift.

The customer needs to change the orientation of pallets, molds and material rolls before feeding them into a machine. Doing this by hand takes several people prying and tilting the load, and because it is heavy, it can easily fall onto someone. Using a forklift to tip the load causes impacts that damage the pallet edges.

FullSharp supplies an electric tilting table rated 1000 kg, rotating the load 90 degrees with an electric motor. The operator places the load on the table, presses the button, and stands clear of the tilting area. Unlike a lift table that only moves up and down, this equipment changes the load's orientation to move it into the next process step.

1-Ton Electric Tilting Table, Tilts Pallets, Molds and Heavy Rolls 90 Degrees

1-ton electric tilting table rotating a heavy load 90 degrees inside the warehouse area.

Equipment Installed

  • Tilting table frame: a steel structure rated for 1000 kg, with two perpendicular faces supporting the load before and after tilting.
  • Electric tilting mechanism: rotates the table the full 90 degrees at a steady speed, stopping precisely at both ends of travel.
  • Control cabinet and push buttons: buttons are placed outside the tilting area, so the operator does not have to stand next to the load while the machine runs.
  • Travel limits and safety latch: limits the tilt angle and keeps the table locked firmly at the final position.
  • Load retaining edge: keeps the load resting still on the table throughout the tilt, preventing it from sliding off.

Key Specifications

  • Tilting load capacity1000 kg
  • Tilt angle90 degrees
  • Drive typeElectric

Benefits for Your Facility

No More Manual Prying

The motor handles the entire tilting motion, so no group of people is needed to pry a heavy load.

Operator Stays Clear

Push-button control from a distance means the load will not fall on the operator even if it tips.

No Load Damage

Tilting is controlled, with no impact like when a forklift pries up a pallet.

Actual Installation Photos

1-Ton Electric Tilting Table, Tilts Pallets, Molds and Heavy Rolls 90 Degrees - photo 1 1-Ton Electric Tilting Table, Tilts Pallets, Molds and Heavy Rolls 90 Degrees - photo 2 1-Ton Electric Tilting Table, Tilts Pallets, Molds and Heavy Rolls 90 Degrees - photo 3 1-Ton Electric Tilting Table, Tilts Pallets, Molds and Heavy Rolls 90 Degrees - photo 4 1-Ton Electric Tilting Table, Tilts Pallets, Molds and Heavy Rolls 90 Degrees - photo 5 1-Ton Electric Tilting Table, Tilts Pallets, Molds and Heavy Rolls 90 Degrees - photo 6 1-Ton Electric Tilting Table, Tilts Pallets, Molds and Heavy Rolls 90 Degrees - photo 7 1-Ton Electric Tilting Table, Tilts Pallets, Molds and Heavy Rolls 90 Degrees - photo 8 1-Ton Electric Tilting Table, Tilts Pallets, Molds and Heavy Rolls 90 Degrees - photo 9 1-Ton Electric Tilting Table, Tilts Pallets, Molds and Heavy Rolls 90 Degrees - photo 10 1-Ton Electric Tilting Table, Tilts Pallets, Molds and Heavy Rolls 90 Degrees - photo 11 1-Ton Electric Tilting Table, Tilts Pallets, Molds and Heavy Rolls 90 Degrees - photo 12 1-Ton Electric Tilting Table, Tilts Pallets, Molds and Heavy Rolls 90 Degrees - photo 13

Click a photo to enlarge. Album of 13 photos taken on site.

Suitable Applications

  • Warehouses needing to reorient pallets before feeding a machine
  • Plastic molding and casting shops tilting molds
  • Paper, film and metal plants tilting material rolls
  • FDI plants handling heavy loads in batches

Frequently asked questions

What is the difference between a tilting table and a lift table?

A lift table only moves up and down. A tilting table changes the load's orientation, here through 90 degrees, so a pallet, mold or roll can be turned for the next process step.

How is the operator kept safe during tilting?

The push buttons are placed outside the tilting area, so the operator is not next to the load. Travel limits and a safety latch lock the table at the final position.

Will tilting damage the load?

The motor turns the table at a steady speed and a retaining edge stops the load sliding off, avoiding the impacts that damage pallet edges when tipping with a forklift.

Similar projects

Installation Consultation for Your Facility

FullSharp asks about the size, weight and center of gravity of the load to be tilted, to select a table surface size large enough to support it. Our engineers review the material flow in and out and the power supply at the installation site. Contact FullSharp for a consultation on the right configuration.

Contact Us for a Survey and QuoteView Completed Projects