300 kg Electric Roll Clamp Lifter

Finished rolls can weigh several hundred kilograms and are stored horizontally in the warehouse, but the machine needs them standing upright. Rolling them along the floor leaves them dirty and crushes the edges, while a standard fork lifter can easily puncture the outer layer.

FullSharp supplied a 300 kg electric roll clamp lifter with a clamp head that cradles the roll body and tilts it. One operator drives up, clamps the roll, lifts it, tilts it to the right orientation, and delivers it straight to the feed position.

300 kg Electric Roll Clamp Lifter with On-Spot Tilting

A 300 kg electric roll clamp lifter holding and tilting a material roll in the warehouse.

Equipment Installed

Roll clamp head: two jaws cradle the roll body, with adjustable clamping force that holds firmly without crushing the outer layer.
Tilting mechanism: rotates the roll between horizontal and vertical, stopping mid-travel when needed.
Electric lifting unit: an electric motor lifts and lowers evenly with no jerking, so the roll never shifts when it stops.
Chassis and steering wheels: a compact body that turns in narrow warehouse aisles, with brakes to hold the lifter steady during operation.

Key Specifications

Load capacity300 kg
Operation typeElectric lift
Clamp head functionClamping and tilting rolls

Benefits for the Factory

No rolling on the floor

The roll stays on the lifter at all times, so it never gets dirty or crushed at the edges.

Reorients on the spot

Tilting happens right on the clamp head, with no extra tilt table or second person needed.

One person handles it all

From picking up the roll in the warehouse to loading it onto the machine, one operator does the whole job.

Actual Installation Photos

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 1

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 2

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 3

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 4

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 5

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 6

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 7

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 8

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 9

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 10

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 11

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 12

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 13

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 14

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 15

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 16

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 17

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 18

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 19

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 20

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 21

300 kg Electric Roll Clamp Lifter with On-Spot Tilting - photo 22

Click a photo to enlarge. Album of 22 photos taken on site.

Suitable Applications

Printing and film-coating plants
Paper and packaging mills
Textile plants with large fabric rolls
Roll-form finished goods warehouses

Installation Consultation for Your Factory

FullSharp asks for the roll's diameter, width, and weight along with the feed shaft height to select the right clamp head. We hand over the lifter, provide safe operation training, and offer warranty support in Vietnam.