VN EN TW
FullSharp
Vietnam+84 332 839 268Taiwan+886 3 451 8806Send requestreply in 24 h
About
Equipment
What do you need to lift
Completed projects
Catalogue
Contact
VNENTW
FullSharp · since 1991

FullSharp supplied a hand-push electric lifter built for cleanrooms that clamps material rolls and tilts them 90 degrees, from horizontal in storage to upright for loading on the machine. It runs on electricity with no exhaust and little dust, and the roll is turned without manual effort, so its edges are not dented.

Material rolls lie horizontally in storage but need to stand upright when loaded onto a machine, and turning them by hand is heavy work that risks denting the roll. The cleanroom also restricts dust, so an ordinary fuel-powered lifter cannot be used.

FullSharp provides a hand-push electric lifter built for cleanrooms, running on electricity with no exhaust and minimal dust. The lifting unit clamps the roll and tilts it 90 degrees, turning it from horizontal to upright without any manual effort.

Push-Type Electric Lifter for Cleanrooms, Lifting and Tilting Material Rolls 90 Degrees

A hand-push electric lifter for cleanrooms clamping and tilting a material roll.

Equipment installed

  • Electric lifter frame: wheels and surfaces suited to cleanroom environments, with no exhaust during operation.
  • Electric lifting unit: raises and lowers at the push of a button, at a steady speed, stopping precisely at the height needed to place the roll.
  • Roll-clamping forks: wrap around the roll with a soft contact surface, holding it firmly without denting the core or edges.
  • 90-degree tilting mechanism: rotates the roll from horizontal to upright right on the lifter, with no need to set it down to turn it.

Key specifications

  • Roll tilt angle90 degrees
  • Power sourceElectric, hand-push
  • EnvironmentCleanroom
  • Load handledMaterial rolls

Benefits for the workshop

Turns without manual effort

The tilting mechanism turns the roll from horizontal to upright, so workers no longer roll or pry the roll by hand.

Keeps the roll intact

The clamping forks wrap evenly around the roll body, so the core and edges stay undamaged during lifting and tilting.

Suited to cleanrooms

Electric-powered with minimal dust and no exhaust, so it can be used in controlled-cleanliness areas.

Actual installation photos

Push-Type Electric Lifter for Cleanrooms, Lifting and Tilting Material Rolls 90 Degrees - photo 1 Push-Type Electric Lifter for Cleanrooms, Lifting and Tilting Material Rolls 90 Degrees - photo 2 Push-Type Electric Lifter for Cleanrooms, Lifting and Tilting Material Rolls 90 Degrees - photo 3 Push-Type Electric Lifter for Cleanrooms, Lifting and Tilting Material Rolls 90 Degrees - photo 4 Push-Type Electric Lifter for Cleanrooms, Lifting and Tilting Material Rolls 90 Degrees - photo 5 Push-Type Electric Lifter for Cleanrooms, Lifting and Tilting Material Rolls 90 Degrees - photo 6 Push-Type Electric Lifter for Cleanrooms, Lifting and Tilting Material Rolls 90 Degrees - photo 7 Push-Type Electric Lifter for Cleanrooms, Lifting and Tilting Material Rolls 90 Degrees - photo 8 Push-Type Electric Lifter for Cleanrooms, Lifting and Tilting Material Rolls 90 Degrees - photo 9 Push-Type Electric Lifter for Cleanrooms, Lifting and Tilting Material Rolls 90 Degrees - photo 10 Push-Type Electric Lifter for Cleanrooms, Lifting and Tilting Material Rolls 90 Degrees - photo 11 Push-Type Electric Lifter for Cleanrooms, Lifting and Tilting Material Rolls 90 Degrees - photo 12 Push-Type Electric Lifter for Cleanrooms, Lifting and Tilting Material Rolls 90 Degrees - photo 13 Push-Type Electric Lifter for Cleanrooms, Lifting and Tilting Material Rolls 90 Degrees - photo 14 Push-Type Electric Lifter for Cleanrooms, Lifting and Tilting Material Rolls 90 Degrees - photo 15 Push-Type Electric Lifter for Cleanrooms, Lifting and Tilting Material Rolls 90 Degrees - photo 16 Push-Type Electric Lifter for Cleanrooms, Lifting and Tilting Material Rolls 90 Degrees - photo 17 Push-Type Electric Lifter for Cleanrooms, Lifting and Tilting Material Rolls 90 Degrees - photo 18

Click a photo to enlarge. Album of 18 photos taken on site.

Suitable applications

  • Cleanrooms producing film and industrial membranes
  • Textile and nonwoven factories changing rolls on machines
  • Printing and laminating shops loading rolls onto shafts
  • Roll-material warehouses needing reorientation before feeding into a line

Related products and projects

Frequently asked questions

How do you turn a material roll from horizontal to upright?

Use a lifter with a clamp that holds the roll and a tilting unit that rotates it 90 degrees. The roll is turned by the machine instead of by hand, so it is not dropped or dented.

What lifting equipment can be used in a cleanroom?

Electric equipment with no exhaust and low dust. A fuel-powered lifter is not suitable. The lifter in this project is electric and pushed by hand.

Will a roll clamp damage the roll?

The clamp is designed to hold the roll firmly without denting it. FullSharp checks the real roll diameter, width and weight to set the clamp and tilt unit.

Similar projects

Consultation for your workshop

FullSharp measures the roll's diameter, width, and weight, and checks the machine shaft height to determine the lifting travel needed. Our engineers also ask about the factory's cleanroom requirements to select the right wheels and surface finish. Send us the roll specifications and we will recommend a configuration.

Contact us for a site survey and quoteView completed projects