Knight Extension Boom Servo Arms KSHEB / KSHAEB

Extension Boom Servo Arms

KSHAEB Floor – Gắn sàn — **KSHAEB Floor – Floor mounted**

KSHEB Overhead – Gắn ray trần — **KSHEB Overhead – Overhead rail mounted**

Extension Boom Servo Arm models: KSHEB / KSHAEB – 250 / 350 / 500 / 750 / 1000-2401

Knight KSHEB (overhead carriage mounted) and KSHAEB (floor mounted) are Intelligent Assist Devices (IADs) that let the operator reach beyond the area directly below the rail system and position loads precisely along the "Z" (vertical) axis with high speed and outstanding reliability. The system allows non-linear overhead movement within a flexible reach envelope at each workstation.

Knight Servo Hoist technology becomes an extension of the operator's natural movement, significantly increasing precision, responsiveness and repeatability – improving safety, productivity and overall quality. Key benefits: eliminates unnecessary motions, shortens response time and minimizes the effect of inertia on heavy loads.

* The overhead carriage is not included and is sold separately. Contact FullSharp for advice.

Overhead carriage mounted series (KSHEB): KSHEB250S-2401 | KSHEB350S-2401 | KSHEB500S-2401 | KSHEB750S-2401 | KSHEB1000S-2401

Floor mounted series (KSHAEB): KSHAEB250S-2401 | KSHAEB350S-2401 | KSHAEB500S-2401 | KSHAEB750S-2401 | KSHAEB1000S-2401

See custom servo applications in the Knight Global photo gallery.

General specifications

Mechanical

Speed: up to 241 ft/min [60 m/min]
Floor pedestal height: 2.4 m – 3.0 m
Safety factor: 125%
Fail-safe brake
Redundant dual-chain design:
- Load chain: carries the lifting load
- Safety chain: runs alongside the load chain as a backup
Chain length: unlimited (standard 18 ft)
Sealed worm gearbox
H5 duty class – continuous duty cycle

Electrical

24 VDC, 2A supply – industry standard for custom tooling (grippers, vacuum cups, switches, sensors, lights…)
Illuminated Run/Stop button
240 VAC, single phase, 50/60 Hz
Payload & handle load sensing
I/O capability:
- 16 inputs / 8 outputs
- 8 inputs / 4 outputs free for interface control
Status LEDs – green & blue push buttons
Fault LED, twist-to-release Run/Stop button

Specifications – KSHEB series (overhead carriage mounted)

Model	Capacity lbs. [kg]	Max. speed fpm. [mpm]	Voltage / Phase
KSHEB250S-2401	250 lbs. [113 kg]	196.85 fpm. [60.0 mpm]	240V / 1 phase
KSHEB350S-2401	350 lbs. [158 kg]	241.00 fpm. [73.5 mpm]	240V / 1 phase
KSHEB500S-2401	500 lbs. [226 kg]	98.43 fpm. [30.0 mpm]	240V / 1 phase
KSHEB750S-2401	750 lbs. [340 kg]	123.03 fpm. [37.5 mpm]	240V / 1 phase
KSHEB1000S-2401	1,000 lbs. [453 kg]	82.02 fpm. [25.0 mpm]	240V / 1 phase

Specifications – KSHAEB series (floor mounted)

Model	Capacity lbs. [kg]	Max. speed fpm. [mpm]	Voltage / Phase
KSHAEB250S-2401	250 lbs. [113 kg]	196.85 fpm. [60.0 mpm]	240V / 1 phase
KSHAEB350S-2401	350 lbs. [158 kg]	241.00 fpm. [73.5 mpm]	240V / 1 phase
KSHAEB500S-2401	500 lbs. [226 kg]	98.43 fpm. [30.0 mpm]	240V / 1 phase
KSHAEB750S-2401	750 lbs. [340 kg]	123.03 fpm. [37.5 mpm]	240V / 1 phase
KSHAEB1000S-2401	1,000 lbs. [453 kg]	82.02 fpm. [25.0 mpm]	240V / 1 phase

Application videos

Video

Accessories

Servo controls

Tay Cầm Inline có Trigger — **Inline handle with trigger**KLCA1000
Weight: 6.81 kg | Capacity: 750–2,000 lbs
Integrated LMM & OCI module; Programmable 750 lb load cell; Illuminated Float/Lift & Run-Stop buttons; Up to 4 M12 4-pin ports

Module LMM + OCI — **LMM + OCI module**KLCA1002
Used with a pendant / fixture handle
Programmable load sensor; Ethernet programming port; Up to 3 M12 4-pin I/O ports; Includes KSAA1004 shackle

Module LMM Pass Through — **LMM pass-through module**KLCA1004
Used when the operator cannot reach the Run-Stop
Ethernet programming port; 19-pin M23 input & output connectors; Includes KSAA1004 shackle; Used with a separate OCI (KCA1015)

Tay Cầm 2 Tốc Độ + OCI — **2-speed handle + OCI**KCA1033
Weight: 2.29 kg
2-speed control; 9-pin D-Sub programming port; Illuminated Float/Lift & Run-Stop buttons; Optional trigger configuration

Tay Cầm Load Cell Gắn Đồ Gá — **Fixture-mounted load cell handle**KCA1071
Weight: 4.96 kg
Amplified 500 lbs load cell; No buttons to press – just grip the handle; Response force < 0.68 kg; 8-pin M12 cable included

Remote Điều Khiển Không Dây — **Wireless remote control**KCA1004 / 1005 / 1006
FCC Part-15 & CE compliant
Signal range: 900 ft [300 m]; 62 programmable channels; AA batteries, > 100 hours; KCA1004: 4 buttons | 1005: 6 buttons | 1006: 8 buttons

OCI Gắn Đồ Gá (Fixture Mounted) — **Fixture-mounted OCI**KCA1014 / KCA1015
Weight: 1.59 kg / 3.1 kg
Mounts directly on the fixture; Illuminated LIFT, FLOAT & RUN-STOP buttons; KCA1014: rear cable exit | KCA1015: side cable exit

Tay Cầm 2 Tốc Độ (Non-Prog.) — **2-speed handle (non-programmable)**EPDA9600
Weight: 1.13 kg
2 thumb levers – 4 switches; Half travel = speed 1 | Full travel = speed 2; IP67 | UL Listed, CE Approved

Tay Cầm 2 Tốc Độ + Trigger — **2-speed handle + trigger**EPDTA9600
Weight: 1.27 kg
2 thumb levers + 1 trigger; 5 switches in total; IP67 | UL Listed, CE Approved

General accessories

Thước Đo Mòn Xích Chính Xác — **Precision chain wear gauge**KSAA1003
Weight: 0.39 kg
Gauges 4mm & 5mm zinc-plated chain; Durable steel construction

Bộ Thay Thế Xích Servo SDS — **SDS servo replacement chain kit**KDSA1010 / KDSA1011
Standard length 12–18 ft
KDSA1010 (4mm): 200–500 lbs capacity; KDSA1011 (5mm): 350–1,000 lbs capacity; Heat-treated, electro-galvanized chain

Móc Nối Nhanh / Tháo Nhanh — **Quick-connect / quick-release hook**KSAA1001 / KSAA1002
Max. capacity: 680–907 kg
Quick release via release pin; KSAA1001: 16mm | KSAA1002: 20mm; Heat-treated alloy steel

Shackle (Khóa Treo) — **Shackle**KSAA1004
Max. capacity: 453 kg [1,000 lbs]
4140 steel body, heat-treated to Rockwell C 38-42; Secured with 2 M6 steel pins; Mounts below the load cell

Swivel Hook Shackle — **Swivel hook shackle**KSAA1007
Weight: 2.08 kg | Capacity: 453 kg
Large connection hole for a swivel hook; Includes KSAD1022 swivel hook; Heat-treated 4140 steel

Móc Xoay Có Khóa — **Locking swivel hook**KSAD1022
Weight: 0.72 kg | Capacity: 1,451 kg
Grade 100 – 20% stronger than Grade 80; Self-locking under load; Anti-friction bearing, 360° swivel

Phanh Ray Servo Hoist — **Servo hoist rail brake**KSAA1011
Weight: 2.72 kg
Locks the hoist in place on the rail; Pneumatic brake – front or rear mounting; Replaceable brake pads

Load trolleys

Xe Con Tải – Ray RAD7510 — **Load trolley – RAD7510 rail**KSAA1050
Max. capacity: 1,134 kg | Weight: 4.31 kg
High-impact glass-filled nylon wheels; Double-shielded bearings, no lubrication required; −29°C to +120°C

Xe Con Tải – Ray RAD6110 — **Load trolley – RAD6110 rail**KSAA1059
Max. capacity: 725 kg | Weight: 3.45 kg
High-impact glass-filled nylon wheels; Double-shielded bearings, no lubrication required; −29°C to +120°C

Xe Con Tải – Ray RAD4110 — **Load trolley – RAD4110 rail**KSAA1048
Max. capacity: 408 kg | Weight: 2.04 kg
High-impact glass-filled nylon wheels; Double-shielded bearings, no lubrication required; −7°C to +120°C

Electrical cables

Cáp Điện Cuộn (Coiled) — **Coiled cable**KCA1040
Manufactured exclusively for Knight Global
Coils around the servo hoist chain; 19-pin military bayonet connector; Length: 2–20 ft

Cáp Điện Thẳng (Straight) — **Straight cable**KCA1041
Manufactured exclusively for Knight Global
Connects the handle to the servo hoist; 19-pin military bayonet connector; Length: 2–15 ft

Cáp Micro Switch 4 & 8 Chân — **4 & 8-pin micro switch cables**CALL
Contact FullSharp to order
Gray PVC, 22 AWG, 4A, 300V; Straight or 90° right-angle connector; Length: 1–6 m

Enclosures & disconnects

Tủ Cầu Dao Điện 3KVA — **3KVA disconnect enclosure**KCA1018
Converts 480VAC → 240VAC; Finger-safe 3KVA transformer; 15A primary & secondary breakers; For KSH250S–KSH1000S

Tủ Cầu Dao Điện 5KVA — **5KVA disconnect enclosure**KCA1055
Converts 480VAC → 240VAC; Finger-safe 5KVA transformer; 25A primary & secondary breakers; For dual/triple servo systems

Đế Đỡ Tủ Cầu Dao — **Disconnect enclosure stand**KCA1001
Holds the enclosure at an ergonomic height; Multiple height settings; M10×1.5 Nylock bolts

Technical documents

Catalogs

Spec sheets / CAD

Installation guides

Operation manual & software

FULL-SHARP AUTOMATIZED VN (FULLSHARP)
Authorized distributor of Knight Global lifting equipment in Vietnam — VSIP Hai Phong
Contact FullSharp for a quotation and advice on the right system configuration for your project.