VN EN TW
FullSharp
Vietnam+84 332 839 268Taiwan+886 3 451 8806Send requestreply in 24 h
About
Equipment
What do you need to lift
Completed projects
Catalogue
Contact
VNENTW
FullSharp · since 1991

FullSharp installed a pneumatic crane on a ceiling-mounted rail between the mixing and filling areas of a paint workshop, with a hook tool that carries four cans at once. A force-sensing handle reads the operator's push, so the group of cans follows the hand, stays upright, and lowers into place without spilling paint.

A paint workshop has to move cans continuously from the mixing area to the filling area. Carrying cans by hand means many trips per shift, and tilting a can even slightly spills paint onto the floor. The cans are slippery, and paint-covered hands raise the risk of dropping them.

FullSharp installed a pneumatic crane running on a ceiling-mounted rail, fitted with a hook tool for 4 paint cans at once. A force-sensing handle reads the operator's push, so the group of cans follows the hand, stays balanced, and lowers exactly into place.

Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool

A 4-paint-can hook tool hanging under the pneumatic crane on the ceiling rail in the mixing area.

Equipment Installed

  • Ceiling-mounted rail: a route connecting the mixing area to the filling area, with the trolley running the whole distance without switching equipment.
  • 4-paint-can hook tool: a hook frame that holds four can handles, gripping firmly and keeping the cans upright while moving.
  • Force-sensing handle: a sensor reads the operator's push and lifts or lowers accordingly, with no button pressing needed.
  • Pneumatic balancing unit: keeps lifting force steady whether carrying one can or all four.

Key Specifications

  • Cans lifted per trip4 cans

Benefits for the Factory

Fewer trips

Lifting all four cans at once sharply cuts the distance workers walk per shift.

No paint spills

The cans stay upright and move smoothly, limiting spills and keeping the floor cleaner.

Less strain on shoulders and back

No repeated heavy carrying, reducing shoulder and neck pain by the end of the shift.

Actual Installation Photos

Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 1 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 2 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 3 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 4 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 5 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 6 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 7 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 8 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 9 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 10 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 11 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 12 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 13 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 14 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 15 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 16 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 17 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 18 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 19 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 20 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 21 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 22 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 23 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 24 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 25 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 26 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 27 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 28 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 29 Rail-Mounted Pneumatic Crane with a 4-Paint-Can Hook Tool - photo 30

Click a photo to enlarge. Gallery of 30 photos taken on site.

Suitable Applications

  • Paint and liquid chemical mixing and filling workshops
  • Areas transferring cans between process stages
  • Factories with a fixed, repeated transport route
  • Warehouses storing cans with handles

Related Products and Projects

Frequently asked questions

How can I move several paint cans at once without spilling?

A hook frame that holds four can handles keeps the cans upright while a pneumatic balancing unit lifts them smoothly. Moving all four together cuts trips sharply and limits spills on the floor.

What is a force-sensing handle?

A sensor in the handle reads how hard and which way the operator pushes, and the crane lifts or lowers to match. There are no up and down buttons, so placing the load feels like moving it by hand without the weight.

Is a ceiling rail better than a jib crane for this job?

When the route between two areas is fixed and repeated all day, a ceiling rail lets the trolley run the whole distance without switching equipment and keeps the floor clear. FullSharp plans the rail layout from the actual route.

Similar projects

Installation Consulting for Your Factory

FullSharp measures the full can weight, handle type, and distance between work stations. From there we design a hook tool that fits the handles exactly and lay out an efficient rail route. Call FullSharp to schedule a survey at your workshop.

Contact us for a site survey and quoteView Completed Projects