Equipment › ANVER Vacuum Components › Vacuum Switches and Sensors › AVES-01 digital control switch

ANVER AVES-01 digital vacuum/pressure control switch

The AVES-01 is a compact compound pressure gauge with switch outputs, covering negative to normal pressure for non-corrosive gases.

Request a quote

Vacuum system components
Digital vacuum/pressure control switch

Model AVES-01 digital control switch

AVES-01 digital vacuum/pressure control switch

Model AVES-01 digital control switch for non-corrosive gases
This popular model used for non-corrosive gases [compound and low pressure] is a compact multi-purpose compound pressure gauge, specifically designed to cover negative-to-normal pressure. A rear mount bracket option is available.

Features

Full 3-digit red LED display – gives a clear indication even in low light locations
Proven IP40 grade gauge body is suitable for industrial installations
Small, space-saving 30mm square face design
2 NPN switch output with multiple operation modes possible
Analog output 1-5V in addition to the 2 NPN switch output
6 different pressure units are available for selection

Digital vacuum/pressure control switch specifications

	Product Photo	Model number	Pressure port	Item weight oz. (grams) including 2 m cable		Product Photo	Optional Accessories
	AVES-01	Plastic 1/8 female outside, 5m inside	94 (3.316)		Panel Mounting Bracket P/N: AVES-01-BRACKET

Pressure reference: gauge – pressure setting range

Model number	Rated pressure range	kPa	gf/cm²	In. Hg (mm Hg)	mbar	psi	Breakdown pressure
AVES-01	-100 to 1000 kPa	-999 to 999	-999 to 999	0 to 29.9 (0 to 760)	n/a	-14.5 to 14.5	500 kPa

Switch output

Model number	General specifications	Hysteresis	Repeatability	Response*	Short circuit protection
AVES-01	2-point output, NPN transistor open collector, capacity: 30 V DC 100 mA max.	Adjustable	+/- 0.2% F. S. +/- 1 digit	1 ms maximum (Program 2.0: 50, 100, 250, 500 ms)	Provided

* Please refer to “Models explanation”
** Output mode setting (detected pressure – pin): refer to “Programming”

Environmental characteristics

Model number	Protection grade	Operating temp. range	Storage temp. range	Operating humidity
AVES-01	IP40 (Pressure Gauge Body): Conforming to IEC	32° to 122°F (0° to 50°C)	32° to 122°F (0° to 50°C)	35 to 85% Relative Humidity

General

Model number	Analog output	Display	Negative pressure display	Switch state indication
AVES-01	Output voltage: 1-5 V Output Impedance: 10k ohm Resolution: 1/204	Full 3 digit LED (Sampling Cycle: 4/second)	Negative Pressure LED is on	Output 1 (green) and output 2 (red) light up when output is on: Thermal Error

AVES-01 dimensional drawing

VSEL-ADJ-NCNO vacuum switch VSPN-ADJ vacuum switches JTSE electronic vacuum switch JTSED vacuum switch JTSED-W vacuum switch JTZSE digital control switch JTZSE4 digital control switch C-CV-CK vacuum pumps 3/2 A-EVC solenoid valves A-3116040 vacuum switch A-3116041 vacuum switch

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.

ANVER AVES-01 digital vacuum/pressure control switch

Related pages

Need an ANVER system for your load?