Equipment › ANVER Vacuum Components › Vacuum Switches and Sensors › A-3116041 vacuum switch

ANVER A-3116041 vacuum/pressure differential switch

The A-3116041 converts a pressure signal into an electrical signal through a snap acting switch, with a set point adjusted by a hex screw.

Request a quote

Vacuum system components
Electric vacuum switches and pressure sensors
Model number A-3116041

ANVER’s A-3116041 Vacuum/Pressure Differential Switches are activated when a bellows, diaphragm, or piston sensor responds to a pressure change. This response, at a pre-determined set point, actuates a single snap acting switch, converting the pressure signal into an electrical signal. Control set point may be varied by turning the internal adjustment hex. (See adjustment below.)

Adjustment of A-3116041:
Remove vacuum/pressure switch cover. Adjust set point by turning 5/8″ hex adjustment screw clockwise (in) to raise set point, or counter-clockwise (out) to lower set point. Tension on adjustment screw can be increased by tightening lock into it.

Note: UL listed and CSA approved

Part Number

Exact replacement for P-Style switch number

Schematic

A-3116041

EVS100 (31.16.041)

A-3116041 top view and side view

A-3116041 top and side view drawing

Specifications for A-3116041 vacuum/pressure switch

Vacuum range	0 to 30 in. Hg
Output	SPDT switch
Enclosure	NEMA 4
Pressure connection	1/4″ female NPT, nickel-plated
Maximum pressure	30 psi
Current	15 amps
Voltage	125/250/480 VAC
Differential	Fixed (1.0 to 2.0 in. Hg)
Item Weight [lb (kg)]	1.68 (0.76)

VSEL-ADJ-NCNO vacuum switch VSPN-ADJ vacuum switches AVES-01 digital control switch JTSE electronic vacuum switch JTSED vacuum switch JTSED-W vacuum switch JTZSE digital control switch JTZSE4 digital control switch C-CV-CK vacuum pumps 3/2 A-EVC solenoid valves A-3116040 vacuum switch

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.

ANVER A-3116041 vacuum/pressure differential switch

Related pages

Need an ANVER system for your load?