ANVER

ANVER vacuum tube lifting system with overhead bridge crane

ANVER vacuum tube lifting system installed on an overhead bridge crane, used for palletizing and depalletizing boxes in a work area.

ANVER VT180 tube lifter with foam-seal pad for concrete blocks

ANVER VT180-2.5 vacuum tube lifter with foam-seal attachment T1-070140-A2C4 on a workstation jib crane lifts concrete blocks up to 80 lb (36 kg).

ANVER VT180 tube lifter handling fiber drums in a lab clean room

ANVER VT180-2.5-D9 vacuum tube lifter handles fiber drums in a laboratory clean room, with vacuum pumps mounted on an articulated jib crane.

ANVER VT tube lifter palletizing 5-gallon paint pails three at a time

ANVER VT vacuum tube lifting system on a ceiling mounted gantry crane with ceiling mounted vacuum pumps palletizes 5-gallon paint pails three at a time.

Free standing workstation bridge crane with ANVER VT160 tube lifter

ANVER VT160 vacuum tube lifting system installed on a free standing workstation bridge crane, used for palletizing cartons in the work cell.

ANVER vacuum tube lifting system typical setup with overhead crane

A typical setup of an ANVER vacuum tube lifting system suspended from an overhead crane, shown here palletizing cartons in a work area.

Multiple ANVER vacuum tube lifters with ceiling mounted pumps

Installation example of multiple ANVER vacuum tube lifters with ceiling mounted vacuum pumps, used for palletizing cartons in one work area.

Multiple ANVER tube lifters with ceiling mounted pumps (second view)

A second view of an installation of multiple ANVER vacuum tube lifters with ceiling mounted vacuum pumps, used for palletizing cartons.

Multiple ANVER vacuum tube lifters with overhead mounted pumps

Installation example of multiple ANVER vacuum tube lifters with overhead mounted vacuum pumps, using extended length handles to palletize cartons.

ANVER VT120 with ceiling mounted bridge crane and vacuum station

ANVER VT120-2.5-D7 vacuum tube lifting system on a ceiling mounted bridge crane with a ceiling mounted vacuum station stacks cartons weighing 45 lb (20 kg).

ANVER VT160 vacuum tube lifter for handling stone blocks

ANVER VT160-4.0 vacuum tube lifting system with a BH40-P series bag and sack lifting attachment, used here for handling stone blocks.

ANVER VT160-4.0-CA tube lifter with compressed air release assist

ANVER VT160-4.0-CA vacuum tube lifter uses compressed air for release assist: the air powers the control handle to help the operator release loads.

ANVER VT160 vacuum tube lifter for irregularly shaped loads

ANVER VT160-4.0 vacuum tube lifting system with a BH40-P series bag and sack lifting attachment for handling irregularly shaped loads.

ANVER VT140 tube lifter for power supplies and their cartons

ANVER VT140-2.5-D9 vacuum tube lifter with dual extended pad attachment and pad shut-off valve: one pad lifts the power supply, two pads lift the carton.

ANVER VT tube lifter with extended handle and universal swivel

ANVER VT vacuum tube lifter fitted with an extended length handle, a universal swivel and a vacuum pad extension for reaching loads farther from the operator.

ANVER VT180 tube lifter with six-pad attachment for clay blocks

ANVER VT180-2.5-D9 vacuum tube lifter with a six-pad attachment (6 x T-040105) lifts multiple clay blocks at once, up to 215 lb (97 kg).

ANVER VT140 tube lifter with dual vacuum head for lifting doors

ANVER VT140 vacuum tube lifter with a dual vacuum head attachment (2 x BH40-P) lifts doors measuring 30″ x 79″ (762 x 2007 mm) with irregular surfaces.

ANVER VT140 tube lifter with FlexGrip pad for cylindrical loads

ANVER VT140-2.5-D7 vacuum tube lifting system with FlexGrip pad attachment T1-FG65S20-U35 lifts cylindrical loads of varying sizes up to 125 lb (56.7 kg).

ANVER VT180 tube lifter with foam seal pad for uneven surfaces

ANVER VT180-2.5 standard vacuum tube lifting system with BH90-P foam seal vacuum pad attachment lifts packages with uneven load surfaces.

ANVER rubber bale handling pad attachment 76400174

ANVER rubber bale handling pad attachment 76400174 has two seals on universal brackets that each articulate 45° to suit irregularly shaped loads.

ANVER VT100 vacuum tube lifter for sheet metal trays up to 65 lb

ANVER VT100-2.5 vacuum tube lifting system with FP7-H6 two-pad attachment and positioning guides handles sheet metal trays up to 65 lb (29 kg).

ANVER VT140 tube lifter for packing metal enclosures and palletizing

ANVER VT140-2.5-D7 vacuum tube lifter with dual pad attachment and adjustable load beam packs 100 lb (45 kg) metal enclosures into cartons, then palletizes.

ANVER VTPA-T5-SP custom five-pad attachment for computer chassis

ANVER VTPA-T5-SP custom five-pad attachment fits VT vacuum tube lifting systems and is used for lifting and handling computer chassis.

ANVER VT Series vacuum tube lifter handles odd-shaped products

ANVER VT Series vacuum tube lifter takes custom quick-connect vacuum pad attachments to handle odd-shaped, fragile items such as porcelain toilets.

ANVER VT250 vacuum tube lifter for electrical enclosures up to 500 lb

ANVER VT Series tube lifter model VT250-2.5-7.5 with custom two-pad attachment 76400079 handles electrical enclosures up to 500 lb (227 kg).

ANVER VT160 vacuum tube lifter with dual pads for tubs up to 200 lb

ANVER VT160-4.0-D9 vacuum tube lifter with a dual pad attachment (2 x T-060110) lifts and handles tubs weighing up to 200 lb (91 kg).

ANVER VT180 vacuum tube lifter for aluminum diamond plate tanks

ANVER VT180-2.5-D9 vacuum tube lifting system with custom pad attachment 76400162 handles aluminum diamond plate tanks up to 215 lb (97.5 kg).

ANVER VT160 vacuum tube lifter for plastic-wrapped cubicle walls

ANVER VT160-2.5-A vacuum tube lifter with a triple bag head attachment (3 x T-BH60R-SS) lifts and handles cubicle walls wrapped in plastic.

ANVER VT140 vacuum tube lifter for electronic components up to 50 lb

ANVER VT Series vacuum tube lifter model VT140-2.5-D7 with a two-pad attachment lifts and handles electronic components up to 50 lb (22.7 kg).

ANVER VT100 vacuum tube lifter for ventilation systems up to 65 lb

ANVER VT100-2.5-A vacuum tube lifter with a single rectangular pad attachment T1-050070 lifts and handles ventilation systems up to 65 lb (29 kg).