ANVER Group 1 Vacuum Cup Fittings, barbed push-in from the top

Group 1 fittings are reusable nickel-plated brass parts that fit any cup in the group. Changing a cup takes only a few seconds.

Vacuum Cups and Suction Cups

Vacuum Cup Fittings – Group 1
Barbed Fittings which Push-In from the Top for ANVER Universal Group 1 Suction Cups
Manufacturer PDF

ANVER Group 1 cup fitting

ANVER divides small universal vacuum suction cups into three groups based on mounting specifications and style. Group 1 Fittings, shown here, are simple barbed fittings that push in from the top of the cup.
Within each vacuum fitting group, the hardware is interchangeable with all other suction cups within the group. Any Group 1 fitting will fit any Group 1 suction cup. It may also fit other suction cups with similarly sized holes in the cups’ centers. Verify suitability before use.
These all-metal, electro-less nickel-plated brass fittings are reusable. Once you buy the cups with fittings, you only need to buy replacement rubber cups in the future.
The suction cup is simply pressed onto the end of the barbed fitting to hold tight. Replacement takes only a few seconds and the fitting does not need to be unscrewed.
These specific cup fittings are top-quality production grade fittings made by ANVER Corp. in the USA.

Group 1 Vacuum Cup Fittings:

Product Photo	Vacuum Fitting Part No.	Connection Thread Size		Thru Hole Diameter or Thread in. (mm)	Hex Size in. (mm)	L Height Added to Assembly in. (mm)	H Height in. (mm)	Weight (In Grams)	BM5, BM10-32, BM6, B18M, B18M-G B18F, B18F-G
			The BM5 5 mm barbed fitting w/ Captured O-Ring screws onto the SLSA-1 suspensions
			BM5	M5 (5 mm) male		0.09 (2.3)	0.31 (8)	0.20 (5)		0.35 (9.0)	2.9 Grams
			The BM10-32 barbed fitting w/ Captured O-Ring can screw into 10-32 UNF or 5 mm female
			BM10-32	10-32 UNF male		0.10 (2.5)	0.31 (8)	0.20 (5)		0.35 (9.0)	2.8 Grams
			The BM6 6mm barbed fitting w/ Captured O-Ring can screw into any 6 mm female fitting or mounting
			BM6	M6 (6 mm) male		0.13 (3.4)	0.38 (9.5)	0.20 (5)		0.39 (10.0)	3.5 Grams
–	Product Photo	Part No.	Connection		Thru Hole	Hex Size	Added Height	Overall Height		Weight
			The B18F-G Barbed fitting is a G1/8″ female thread and allows you to screw into the SLSA-2 Suspensions
			B18F-G	G1/8″ female		0.13 (3.6)	0.55 (14)	0.47 (12)		–	4.1 Grams
			The B18F Barbed fitting is a 1/8″ female NPT thread
			B18F	1/8″ NPT female		0.17 (4.2)	0.5 (12.6)	0.47 (12)		–	8.1 Grams
			The B18M Barbed fitting is a 1/8″ male NPT with a 10–32 UNF inside thread
			B18M	1/8″ NPT male	10-32 UNF female	0.17 (4.2)	0.5 (12.6)	0.21 (5.2)		0.51 (13.0)	9.9 Grams
			The B18M-G Barbed fitting is a G1/8″ male with a 5 mm female inside thread
			B18M-G	G1/8″ male	M5 (5 mm) female	0.14 (3.5)	0.55 (14)	0.24 (6)		0.53 (13.5)	12.0 Grams