Equipment › ANVER Vacuum Components › Vacuum Switches and Sensors › JTSED-W vacuum switch

ANVER JTSED-W electronic vacuum switch with digital readout

The JTSED-W is identical to the JTSE switch with an added LED digital display, supplied with 1.5 m of cable and a G1/8″ male connector.

Request a quote

Vacuum system components
JTSED-W electronic vacuum switch with digital readout

The JTSED-W Electronic Vacuum Switch converts the vacuum level into digital output for connection to PLC systems as well as into analog output for the on/off control. The JTSED-W Electronic Vacuum Switch is identical to the JTSE Switch except for the addition of a digital LED display.

Input voltage: 10 – 24 V DC
Accuracy: ±3.0% F.S.

Part Number

Schematic

JTSED-W

JTSED-W dimensional drawing

The JTSED-W digital vacuum switch mounts easily and conveniently under the nozzle and muffler of ANVER JB Series vacuum generators. The switch is provided with 4.9 ft (1.5 m) of connection cable.

Specifications for JTSED-W vacuum switch

Media	Non-corrosive gases and non-lubricated air
Power supply	10.8 ~ 26.4 V DC, ripple (P-P) 10% max., reverse voltage protection
1 switch output	N.C., max. 125 mA, LED indication on display, PNP version
Display	2 digit
Pressure units	kPa
Hysteresis	± 0.5% F.S.
Electrical connection	Grommet lead wire
Air connection	M5 female and G1/8″ male – standard
Operation accuracy	± 3% F.S.
Thermal error	± 3% F.S. in range 0 ~ 50°C (32 ~ 122°F)
Response time	< 5 ms
Current consumption	< 35 mA
Dielectric strength	500 V AC 1 min
Insulation resistance	> 100 M ohm at 500 V DC
Interference emission	As per DIN EN 50081-1
Immunity to interference	As per DIN EN 50082-2
Operating temperature range	0 ~ 60°C (32 ~ 140°F)
Storage temperature range	-10 ~ 70°C (14 ~ 158°F)
Operating humidity range	10 ~ 85 % RH
Vibration	10~55 Hz, 1.5 mm (0.06″), XYZ, 2 hrs
Mass	35 g (1.24 oz)
Weight	1.834 oz. (52 grams)

JTSED-W electronic vacuum
switch with standard G1/8″
male connector

VSEL-ADJ-NCNO vacuum switch VSPN-ADJ vacuum switches AVES-01 digital control switch JTSE electronic vacuum switch JTSED vacuum switch JTZSE digital control switch JTZSE4 digital control switch C-CV-CK vacuum pumps 3/2 A-EVC solenoid valves A-3116040 vacuum switch A-3116041 vacuum switch

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.

ANVER JTSED-W electronic vacuum switch with digital readout

Related pages

Need an ANVER system for your load?