Vietnam+84 332 839 268 Taiwan+886 3 451 8806 Send requestreply in 24 h

FullSharp · since 1991

Equipment › ANVER vacuum cups › P-Series Suction Cups › F Series Flat Cleated Cups

ANVER F Series Flat Cleated Vacuum Cups, 16.6 to 155.6 mm

F series flat cleated vacuum cups work on plane surfaces where minimum movement keeps the pick-up area, and support pliable materials. This page lists every part number with dimensions, capacities, fittings and suspensions.

Request a quote

Vacuum cup materials

The standard materials are Nitrile and Silicone (as noted below each part number).
For more information on the materials, see vacuum cup materials.

Ideal for use on plane surfaces, where minimum movement is required to maintain the pick-up area, and for support of pliable materials. Available in sizes from 0.65 to 6.13 inches (16.6 to 155.6mm).

Product
Photo

ANVER and
P-Series
Description
and Part No.

Connection
Thread Size

Static
Diameter*
in.
(mm)

Static
Height*
in.
(mm)

Horizontal Load Capacity
at 24 in. Hg
(609.6mm Hg)
[2:1 Safety Factor]
lb
(kg)

Pull-Off Capacity
at 27 in. Hg
(685.8mm Hg)
[1:1 Safety Factor]
lb
(kg)

Level
Compensator
Suspensions

F15 Cups

F15-NEO
(Nitrile)
A-315012531.50.125
F15.10

N/A

0.62
(15.8)

0.47
(12.0)

1.1 lbs
(0.49 Kg)

2.47
(1.12)

F15-SIT
(Translucent Silicone)
A-3150125S31.50.125S
F15.20

N/A

0.62
(15.8)

0.47
(12.0)

1.1 lbs
(0.49 Kg)

2.47
(1.12)

F15 Cups with 10-15 Fitting

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F15-NEO/FITTING
(Nitrile)
A-315001431.50.014
F15.10.01AC

M5 Male

0.62
(15.8)

0.6
(14.0)

1.1 lbs
(0.49 Kg)

2.47
(1.12)

F15-SIT/FITTING
(Translucent Silicone)
A-3150014S31.50.014S
F15.20.01AC

M5 Male

0.62
(15.8)

0.6
(14.0)

1.1 lbs
(0.49 Kg)

2.47
(1.12)

Fitting for F15 Cups

Notes

Other Fittings

Suspensions

BM5 FITTING M5 MALE
Replaces
10-15 FITTING
A-3107030
31.07.030
01AC

The BM5 FITTING M5 MALE is an improved 5 mm male fitting with captured O-ring which replaces the older 10-15 FITTING M5 MALE. It allows you to screw directly into any of the SLSA-1 Suspensions.

10-32 FITTING UNF MALE
BM10-32
01AC

The 10-32 Fitting UNF Male is a 10-32 UNF Male fitting. It allows you to screw directly into any of the SLSA-1 Suspensions. Fits all the same cups as the 10-15 Fitting above, but in a 10-32 UNF version. Comes with captured O-ring for a vacuum tight seal. Popular alternate fitting for the North American market.

F20 Cups

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F20-NEO
(Nitrile)
A-315012631.50.126
F20.10

N/A

0.87
(22.1)

0.30
(7.6)

1.87 lbs
(0.8 Kg)

4.2
(1.91)

F20-SIT
(Translucent Silicone)
A-3150126S31.50.126S
F20.20

N/A

0.87
(22.1)

0.30
(7.6)

1.87 lbs
(0.8 Kg)

4.2
(1.91)

A-F20-P60
(Thermo-elastic
Polyurethane)

N/A

0.87
(22.1)

0.30
(7.6)

1.87 lbs
(0.8 Kg)

4.2
(1.91)

A-F20-P30
(Thermo-elastic
Polyurethane)**

N/A

0.87
(22.1)

0.30
(7.6)

1.87 lbs
(0.8 Kg)

4.2
(1.91)

A-F20-P50
(Thermo-elastic
Polyurethane)**

N/A

0.87
(22.1)

0.30
(7.6)

1.87 lbs
(0.8 Kg)

4.2
(1.91)

F20 Cups with 20-30 Fitting

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F20-NEO/1PC FITTING
(Nitrile)
A-3150015A31.50.015A
F20.10.02AD

G 1/8″ Male
M5 Female

0.87
(22.1)

0.70
(17.8)

1.87 lbs
(0.85 Kg)

4.2
(1.91)

F20-SIT/1PC FITTING
(Translucent Silicone)
A-3150015SA31.50.015SA
F20.20.02AD

G 1/8″ Male
M5 Female

0.87
(22.1)

0.70
(17.8)

1.87 lbs
(0.85 Kg)

4.2
(1.91)

F20 Cups with 20-30 Connection Plate

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F20-NEO/FIT/SCREEN
(Nitrile)
A-315001531.50.015
F20.10.02AF

G 1/8″ Male
M5 Female

0.87
(22.1)

0.70
(17.8)

1.87 lbs
(0.85 Kg)

4.2
(1.91)

F20-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150015S31.50.015S
F20.20.02AF

G 1/8″ Male
M5 Female

0.87
(22.1)

0.70
(17.8)

1.87 lbs
(0.85 Kg)

4.2
(1.91)

Fitting for F20 Cups

Notes

Suspensions

20-30 FITTING
A-3150196
31.50.196
02AF

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ adapter.

20-30 STRENGTHENING
RING SILICONE
A-0101084
01.01.084S

The 20-30 Strengthening Ring is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

20-30 CONNECTION PLATE
A-3150141
31.50.141

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ adapter.

20-30 LOCKING SPACER
A-3150140
31.50.140

The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom.

F25 Cups

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F25-NEO
(Nitrile)
A-315012731.50.127
F25.10

N/A

1.08
(27.5)

0.37
(9.4)

2.49 lbs
(1.1 Kg)

5.6
(2.54)

F25-SIT
(Translucent Silicone)
A-3150127S31.50.127S
F25.20

N/A

1.08
(27.5)

0.37
(9.4)

2.49 lbs
(1.1 Kg)

5.6
(2.54)

A-F25-P60
(Thermo-elastic
Polyurethane)

N/A

1.08
(27.5)

0.37
(9.4)

2.49 lbs
(1.13 Kg)

5.6
(2.54)

A-F25-P30
(Thermo-elastic
Polyurethane)**

N/A

1.08
(27.5)

0.37
(9.4))

2.49 lbs
(1.13 Kg)

5.6
(2.54)

A-F25-P50
(Thermo-elastic
Polyurethane)**

N/A

1.08
(27.5)

0.37
(9.4)

2.49 lbs
(1.13 Kg)

5.6
(2.54)

F25 Cups with 20-30 Fitting

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F25-NEO/1PC FITTING
(Nitrile)
A-3150016A31.50.016A
F25.10.02AF

G 1/8″ Male
M5 Female

1.08
(27.5)

0.70
(17.8)

2.49 lbs
(1.13 Kg)

5.6
(2.54)

F25-SIT/1PC FITTING
(Translucent Silicone)
A-3150016SA31.50.016SA
F25.20.02AF

G 1/8″ Male
M5 Female

1.08
(27.5)

0.70
(17.8)

2.49 lbs
(1.13 Kg)

5.6
(2.54)

F25 Cups with 20-30 Connection Plate

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F25-NEO/FIT/SCREEN
(Nitrile)
A-315001631.50.016

G 1/8″ Male
M5 Female

1.08
(27.5)

0.70
(17.8)

2.49 lbs
(1.13 Kg)

5.6
(2.54)

F25-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150016S31.50.016S

G 1/8″ Male
M5 Female

1.08
(27.5)

0.70
(17.8)

2.49 lbs
(1.13 Kg)

5.6
(2.54)

Fitting for F25 Cups

Notes

Suspensions

20-30 FITTING
A-3150196
31.50.196
02AF

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ adapter.

20-30 STRENGTHENING
RING SILICONE
A-0101084
01.01.084S

The 20-30 Strengthening Ring is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

20-30 CONNECTION PLATE
A-3150141
31.50.141

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ adapter.

20-30 LOCKING SPACER
A-3150140
31.50.140

The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom.

F30 Cups

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F30-NEO
(Nitrile)
A-315023931.50.239
F30-2.10

N/A

1.25
(31.6)

0.40
(10.1)

3.1 lbs
(1.4 Kg)

7.0
(3.18)

F30-SIT
(Translucent Silicone)
A-3150239S31.50.239S
F30-2.20

N/A

1.25
(31.6)

0.40
(10.1)

3.1 lbs
(1.4 Kg)

7.0
(3.18)

A-F30-P60
(Thermo-elastic
Polyurethane)

N/A

1.25
(31.6)

0.40
(10.1)

3.1 lbs
(1.4 Kg)

7.0
(3.18)

A-F30-P30
(Thermo-elastic
Polyurethane)**

N/A

1.25
(31.6)

0.40
(10.1)

3.1 lbs
(1.4 Kg)

7.0
(3.18)

A-F30-P50
(Thermo-elastic
Polyurethane)**

N/A

1.25
(31.6)

0.40
(10.1)

3.1 lbs
(1.4 Kg)

7.0
(3.18)

F30 Cups with 20-30 Fitting

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F30-NEO/1 PC FITTING
(Nitrile)
A-3250036A32.50.036A
F30-2.10.02AD

G 1/8″ Male
M5 Female

1.25
(31.6)

0.70
(17.8)

3.1 lbs
(1.4 Kg)

7.0
(3.18)

F30-SIT/1PC FITTING
(Translucent Silicone)
A-3250036SA32.50.036SA
F30-2.20.02AD

G 1/8″ Male
M5 Female

1.25
(31.6)

0.70
(17.8)

3.1 lbs
(1.4 Kg)

7.0
(3.18)

F30 Cups with 20-30 Connection Plate

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F30-NEO/FIT/SCREEN
(Nitrile)
A-3250036F30-2.30.02AF

G 1/8″ Male
M5 Female

1.25
(31.6)

0.70
(17.8)

3.1 lbs
(1.4 Kg)

7.0
(3.18)

F30-SIT/FIT/SCREEN
(Translucent Silicone)
A-3250036SF30-2.20.02AF

G 1/8″ Male
M5 Female

1.25
(31.6)

0.70
(17.8)

3.1 lbs
(1.4 Kg)

7.0
(3.18)

Fitting for F30 Cups

Notes

Suspensions

20-30 FITTING
A-3150196
31.50.196
02AF

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ adapter.

20-30 STRENGTHENING
RING SILICONE
A-0101084
01.01.084S

The 20-30 Strengthening Ring is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

20-30 CONNECTION PLATE
A-3150141
31.50.141

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ adapter.

20-30 LOCKING SPACER
A-3150140
31.50.140

The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom.

F40 Cups

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F40-NEO
(Nitrile)
A-3150129P31.50.129P
F40-2.30

N/A

1.66
(42.1)

0.50
(12.7)

4.89 lbs
(2.22 Kg)

11
(4.99)

F40-SIT
(Translucent Silicone)
A-3150129S31.50.129S
F40-2.20

N/A

1.66
(42.1)

0.50
(12.7)

4.89 lbs
(2.22 Kg)

11
(4.99)

A-F40-P60
(Thermo-elastic
Polyurethane)

N/A

1.66
(42.1)

0.50
(12.7)

4.89 lbs
(2.22 Kg)

11
(4.99)

A-F40-P30
(Thermo-elastic
Polyurethane)**

N/A

1.66
(42.1)

0.50
(12.7)

4.89 lbs
(2.22 Kg)

11
(4.99)

A-F40-P50
(Thermo-elastic
Polyurethane)**

N/A

1.66
(42.1)

0.50
(12.7)

4.89 lbs
(2.22 Kg)

11
(4.99)

F40 Cups with 40/30-2/BL30 Fitting

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F40-NEO/1PC FITTING
(Nitrile)
A-3150018PA31.50.018PA
F40-2.30.04AA

G 1/8″ Female

1.66
(42.1)

0.80
(20.3)

4.89
(2.22)

11
(4.99)

F40-SIT/1PC FITTING
(Translucent Silicone)
A-3150018SA31.50.018SA
F40-2.20.04AA

G 1/8″ Female

1.66
(42.1)

0.80
(20.3)

4.89
(2.22)

11
(4.99)

F40 Cups with 40 Connection Plate

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F40-NEO/FIT/SCREEN
(Nitrile)
A-3150018P31.50.018P
F40-2.30-04AG

G 1/8″ Female

1.66
(42.1)

0.90
(22.9)

4.89
(2.22)

11
(4.99)

F40-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150018S31.50.018S
F40-2.20-04AG

G 1/8″ Female

1.66
(42.1)

0.90
(22.9)

4.89
(2.22)

11
(4.99)

Fitting for F40 Cups

Notes

Suspensions

40/30-2/BL30 FITTING
A-3250001
32.50.001
04AG

The 40/30-2/BL30 FITTING uses a Strengthening Ring 40. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ NPS Thread.

STRENGTHENING
RING SILICONE 40
A-0101085
01.01.085S

The Strengthening Ring 40 is used with the above 40/30-2/BL30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

40 CONNECTION PLATE
A-3150143
31.50.143

The 40 Connection Plate uses a 40 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread.

40 LOCKING SPACER
A-3150142
31.50.142

The 40 Locking Spacer is used with the above 40 Connection Plate. It presses in from the bottom.

F50 Cups

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F50-NEO
(Nitrile)
A-3150130P31.50.130P
F50-2.30

N/A

2.10
(53.3)

0.70
(17.7)

9.33 lbs
(4.23 Kg)

21
(9.53)

F50-SIT
(Translucent Silicone)
A-3150130S31.50.130S
F50-2.20

N/A

2.10
(53.3)

0.70
(17.7)

9.33 lbs
(4.23 Kg)

21
(9.53)

A-F50-P60
(Thermo-elastic
Polyurethane)

N/A

2.10
(53.3)

0.70
(17.7)

9.33 lbs
(4.23 Kg)

21
(9.53)

A-F50-P30
(Thermo-elastic
Polyurethane)**

N/A

2.10
(53.3)

0.70
(17.7)

9.33 lbs
(4.23 Kg)

21
(9.53)

A-F50-P50
(Thermo-elastic
Polyurethane)**

N/A

2.10
(53.3)

0.70
(17.7)

9.33 lbs
(4.23 Kg)

21
(9.53)

F50 Cups with 50 Fitting

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F50-NEO/1PC FITTING
(Nitrile)
A-3150019PA31.50.019PA
F50-2.30.05AG

G 1/8″ Female

2.10
(53.3)

1.10
(27.9)

9.33 lbs
(4.23 Kg)

21
(9.53)

F50-SIT/1PC FITTING
(Translucent Silicone)
A-3150019SA31.50.019SA
F50-2.20.05AG

G 1/8″ Female

2.10
(53.3)

1.10
(27.9)

9.33 lbs
(4.23 Kg)

21
(9.53)

F50 Cups with 50 Connection Plate

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F50-NEO/FIT/SCREEN
(Nitrile)
A-3150019P31.50.019P

G 1/8″ Female

2.10
(53.3)

1.00
(25.4)

9.33 lbs
(4.23 Kg)

21
(9.53)

F50-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150019S31.50.019S

G 1/8″ Female

2.10
(53.3)

1.00
(25.4

9.33 lbs
(4.23 Kg)

21
(9.53)

Fitting for F50 Cups

Notes

Suspensions

50/50-2 FITTING
A-05AG
05AG
(Replaces
A-3250002)
32.50.002

The 50/50-2 Fitting is utilized with a Strengthening Ring 50. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread.

A-05AG-18M-G

The A-05AG-18m-G Fitting is utilized with a Strengthening Ring 50. It allows you to screw into any of the SLSA-2 Suspensions using HS18G-18F-G fitting.

STRENGTHENING
RING SILICONE 50
A-0101086
01.01.086S

The Strengthening Ring 50 is used with the above 50/50-2 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

50 CONNECTION PLATE
A-3150145
31.50.145

The 50 Connection Plate uses a 50 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8″ Thread.

50 LOCKING SPACER
A-3150144
31.50.144

The 50 Locking Spacer is used with the above 50 Connection Plate. It presses in from the bottom.

F75 Cups

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F75-NEO
(Nitrile)
A-3150131PF75.30W

N/A

3.02
(76.5)

0.60
(15.2)

26.6 lbs
(12.1 Kg)

60
(27.22)

F75-SIT
(Translucent Silicone)
A-3150131SF75.20.W

N/A

3.02
(76.5)

0.60
(15.2)

26.6 lbs
(12.1 Kg)

60
(27.22)

A-F75-P50
(Urethane 50)

N/A

3.02
(76.5)

0.60
(15.2)

26.6 lbs
(12.1 Kg)

60
(27.22)

A-F75-P60
(Urethane 60)

N/A

3.02
(76.5)

0.60
(15.2)

26.6 lbs
(12.1 Kg)

60
(27.22)

A-F75-NM
(NOMATHANE®)

N/A

3.02
(76.5)

0.60
(15.2)

26.6 lbs
(12.1 Kg)

60
(27.22)

F75 Cups with 75 Connection Plate

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F75-NEO vacuum cup with connection plate

F75-NEO/CON PLATE
(Nitrile)
A-3150037P31.50.037P

N/A

3.02
(76.5)

0.60
(15.2)

26.6 lbs
(12.1 Kg)

60
(27.22)

F75-SIT vacuum cup with connection plate

F75-SIT/CON PLATE
(Translucent Silicone)
A-3150037S31.50.037S

N/A

3.02
(76.5)

0.60
(15.2)

26.6 lbs
(12.1 Kg)

60
(27.22)

A-F75-P50 vacuum cup with connection plate

A-F75-P50/CON PLATE
(Urethane 50)
A-F75-P50-W

N/A

3.02
(76.5)

0.60
(15.2)

26.6 lbs
(12.1 Kg)

60
(27.22)

A-F75-P60 vacuum cup with connection plate

A-F75-P60/CON PLATE
(Urethane 60)
A-F75-P60-W

N/A

3.02
(76.5)

0.60
(15.2)

26.6 lbs
(12.1 Kg)

60
(27.22)

A-F75-NM-W
(NOMATHANE®)

N/A

3.02
(76.5)

0.60
(15.2)

26.6 lbs
(12.1 Kg)

60
(27.22)

F75 Cups with 75 Fitting

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F75-NEO/FIT/SCREEN 1/8
(Nitrile)
A-3250032P32.50.032P
F75.30.07UA

G 1/8″ Female

3.02
(77.0)

0.80
(20.3)

26.6 lbs
(12.1 Kg)

60
(27.22)

F75-SIT/FIT/SCREEN 1/8
(Translucent Silicone)
A-3250032S32.50.032S
F75.20.07UA

G 1/8″ Female

3.02
(77.0)

0.80
(20.3)

26.6 lbs
(12.1 Kg)

60
(27.22)

A-F75-P50/FIT/SCREEN 1/8
(Urethane 50)
A-F75-P50-FIT

G 1/8″ Female

3.02
(77.0)

0.80
(20.3)

26.6 lbs
(12.1 Kg)

60
(27.22)

A-F75-P60/FIT/SCREEN 1/8
(Urethane 60)
A-F75-P60-FIT

G 1/8″ Female

3.02
(77.0)

0.80
(20.3)

26.6 lbs
(12.1 Kg)

60
(27.22)

A-F75-NM-FIT
(NOMATHANE®)

G 1/8″ Female

3.02
(77.0)

0.80
(20.3)

26.6 lbs
(12.1 Kg)

60
(27.22)

Fitting for F75 Cups

Notes

Suspensions

75 CONNECTION PLATE 1/8
A-3150043
31.50.043

The 75 Connection Plate 1/8 is to be embedded in the 75 Series suction cup’s rubber portion allowing the 75 Fitting 1/8″ to be held in place.

75 FITTING 1/8″
A-3250006
32.50.006
07UA

The 75 Fitting 1/8″ with 1/8″ female center port connection with optional M5 (10/32) female port often used as a blow-off port.

F110 Cups

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F110-NEO
(Nitrile)
A-3150132PF110.30.W

N/A

4.30
(109.2)

0.8
(20.3)

55.6 lbs
(25.2 Kg)

125
(56.7)

F110-SIT
(Translucent Silicone)
A-3150132SF110.20.W

N/A

4.30
(109.2)

0.8
(20.3)

55.6 lbs
(25.2 Kg)

125
(56.7)

A-F110-P50
(Urethane 50)

N/A

4.30
(109.2)

0.8
(20.3)

55.6 lbs
(25.2 Kg)

125
(56.7)

A-F110-P60
(Urethane 60)

N/A

4.30
(109.2)

0.8
(20.3)

55.6 lbs
(25.2 Kg)

125
(56.7)

F110 Cups with 110 Connection Plate

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F110-NEO vacuum cup with connection plate

F110-NEO/CON PLATE
(Nitrile)
A-3150038P31.50.038P

N/A

4.30
(109.2)

0.8
(20.3)

55.6 lbs
(25.2 Kg)

125
(56.7)

F110-SIT vacuum cup with connection plate

F110-SIT/CON PLATE
(Translucent Silicone)
A-3150038S31.50.038S

N/A

4.30
(109.2)

0.8
(20.3)

55.6 lbs
(25.2 Kg)

125
(56.7)

A-F110-P50 vacuum cup with connection plate

A-F110-P50/CON PLATE
(Urethane 50)
A-F110-P50-W

N/A

4.30
(109.2)

0.8
(20.3)

55.6 lbs
(25.2 Kg)

125
(56.7)

A-F110-P60 vacuum cup with connection plate

A-F110-P60/CON PLATE
(Urethane 60)
A-F110-P60-W

N/A

4.30
(109.2)

0.8
(20.3)

55.6 lbs
(25.2 Kg)

125
(56.7)

F110 Cups with 110 Fitting

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F110-NEO/FIT/SCREEN
(Nitrile)
A-3150021P31.50.021P
F110.30.11UA

G 1/2″ Female

4.30
(109.2)

1.0
(25.4)

55.6 lbs
(25.2 Kg)

125
(56.7)

F110-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150021S31.50.021S
F110.20.11UA

G 1/2″ Female

4.30
(109.2)

1.0
(25.4)

55.6 lbs
(25.2 Kg)

125
(56.7)

F110-P50/FIT/SCREEN
(Urethane 50)
A-F110-P50-FIT

G 1/2″ Female

4.30
(109.2)

1.0
(25.4)

55.6 lbs
(25.2 Kg)

125
(56.7)

F110-P60/FIT/SCREEN
(Urethane 60)
A-F110-P60-FIT

G 1/2″ Female

4.30
(109.2)

1.0
(25.4)

55.6 lbs
(25.2 Kg)

125
(56.7)

Fittings for F110 Cups

Notes

Suspensions

110 FITTING 1/2″
A-3250007
32.50.007
11UA

The 110 Fitting 1/2″ with 1/2″ female center port connection with optional NPSF 1/8″ female port often used as a blow-off port.

110 CONNECTION PLATE
A-3150044
31.50.044

The 110 Connection Plate is to be embedded in the 110 Series suction cup’s rubber portion allowing the 110 Fitting 1/2″ to be held in place.

F150 Cups

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F150-NEO
(Nitrile)
A-3150133PF150.30.W

N/A

6.13
(155.6)

1.0
(25.4)

100 lbs
(45 Kg)

240
(109)

F150-SIT
(Translucent Silicone)
A-3150133SF150.20.W

N/A

6.13
(155.6)

1.0
(25.4)

100 lbs
(45 Kg)

240
(109)

F150-P50
(Urethane 50)
A-F150-P50

N/A

6.13
(155.6)

1.0
(25.4)

100 lbs
(45 Kg)

240
(109)

F150-P60
(Urethane 60)
A-F150-P60

N/A

6.13
(155.6)

1.0
(25.4)

100 lbs
(45 Kg)

240
(109)

F150 Cups with 150 Connection Plate

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F150-NEO vacuum cup with connection plate

F150-NEO/CON PLATE
(Nitrile)
A-3150039P
31.50.039P

N/A

6.13
(155.6)

1.0
(25.4)

100 lbs
(45 Kg)

240
(109)

F150-SIT vacuum cup with connection plate

F150-SIT/CON PLATE
(Translucent Silicone)
A-3150039S31.50.039S

N/A

6.13
(155.6)

1.0
(25.4)

100 lbs
(45 Kg)

240
(109)

F150-P50 vacuum cup with connection plate

F150-P50/CON PLATE
(Urethane 50)
A-F150-P50-W

N/A

6.13
(155.6)

1.0
(25.4)

100 lbs
(45 Kg)

240
(109)

F150-P60 vacuum cup with connection plate

F150-P60/CON PLATE
(Urethane 60)
A-F150-P60-W

N/A

6.13
(155.6)

1.0
(25.4)

100 lbs
(45 Kg)

240
(109)

F150 Cups with 150 Fitting

Connection
Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F150-NEO/FIT/SCREEN
(Nitrile)
A-3150022P31.50.022P
F150.30.15UA

G 1/2″ Female

6.13
(155.6)

1.3
(33)

100 lbs
(45 Kg)

240
(109)

F150-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150022S31.50.022S
F150.20.15UA

G 1/2″ Female

6.13
(155.6)

1.3
(33)

100 lbs
(45 Kg)

240
(109)

F150-P50/FIT/SCREEN
(Urethane 50)
A-F150-P50-FIT

G 1/2″ Female

6.13
(155.6)

1.3
(33)

100 lbs
(45 Kg)

240
(109)

F150-P60/FIT/SCREEN
(Urethane 60)
A-F150-P60-FIT

G 1/2″ Female

6.13
(155.6)

1.3
(33)

100 lbs
(45 Kg)

240
(109)

Fittings for F150 Cups

Notes

Suspensions

150 CONNECTION PLATE
A-3150045
31.50.045

The 150 Connection Plate is to be embedded in the 150 Series suction cup’s rubber portion allowing the 150 Fitting 1/2″ to be held in place.

150 FITTING 1/2″
A-3250008
32.50.008

The 150 Fitting 1/2″ with 1/2″ female center port connection with optional NPSF 1/8″ female port often used as a blow-off port.

* All cups shown above are identical in size and shape to P-Style’s cups. The dimensional drawings represent the cup dimensions without a load as given by P-Style.
** These are special cups that may require a minimum purchase (contact us for additional information).

The “G” thread is also known as BSPP, commonly used world-wide for vacuum applications.

F series flat vacuum cups in several sizes

More product information

Flat vacuum cups with valves

P-Series Suction Cup Fittings P-Series B Bellows Cups B3.5 Bellows Vacuum Cups BL Multiple Bellows Cups D Series Deep Vacuum Cups P-Series U Universal Cups P-Series FP Flat Ring Cups ANVER P-Series Suction Cups

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.

ANVER F Series Flat Cleated Vacuum Cups, 16.6 to 155.6 mm

Vacuum cup materials

Related pages

Need an ANVER system for your load?