Vietnam+84 332 839 268 Taiwan+886 3 451 8806 Send requestreply in 24 h

FullSharp · since 1991

Equipment › ANVER Vacuum Components › Vacuum Valves › Flat Cups with Valves

ANVER P-Series Flat Vacuum Cups with Valves, F30 to F150

Button valves open only when the cup contacts the load, so a missed cup causes no loss of vacuum. Tables list load and pull-off capacity, fittings and suspensions.

Request a quote

Vacuum Cups, Suction Cups, and Valve Cup Assemblies
P-Series – Flat Vacuum Cups and Suction Cups with Valves

Vacuum Cup Materials

The standard materials are Nitrile and Silicone (as noted below each part number).
More information: vacuum cup materials.

Product

Photo

ANVER and P-Series
Descriptions
and Part Numbers

Connection
Thread Size

Static
Diameter*
in.
(mm)

Static
Height*
in.
(mm)

Horizontal Load Capacity
at 24 in. Hg
(609.6mm Hg)
[2:1 Safety Factor]
lb
(kg)

Pull-Off Capacity
at 27 in. Hg
(685.8mm Hg)
[1:1 Safety Factor]
lb
(kg)

Level
Compensator
Suspensions

F30 Cups with Valves

F30-NEO/VALVE
(Nitrile)
A-315004931.50.049
F30-2.10.02UV

G 1/8″ Male
M5 Female

1.25
(31.6)

0.40
(10.0)

3.11
(1.41)

7.00
(3.18)

F30-SIT/VALVE
(Translucent Silicone)
A-3150049S31.50.049S
F30-2.20.02UV

G 1/8″ Male
M5 Female

1.25
(31.6)

0.40
(10.0)

3.11
(1.41)

7.00
(3.18)

Fitting & Valve for F30 Cups

Notes

Suspensions

20-30 CONNECTION PLATE

A-315014131.50.141

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm Adapter.
For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8″ Adapter.

30 BUTTON VALVE

A-315005531.50.055

The 30 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup’s valve will not open, causing no loss of vacuum while the other cups pick up the load.

F40 Cups with Valves

Connection Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F40-NEO/VALVE
(Nitrile)
A-3150050P31.50.050P
F40-2.30.04UV

G 1/8″ Female

1.66
(42.1)

0.80
(21.0)

4.89
(2.22)

11.00
(4.99)

F40-SIT/VALVE
(Translucent Silicone)
A-3150050S31.50.050S
F40-20.20.04UV

G 1/8″ Female

1.66
(42.1)

0.80
(21.0)

4.89
(2.22)

11.00
(4.99)

Fitting & Valve for F40 Cups

Notes

Suspensions

40 CONNECTION PLATE

A-315014331.50.143

The 40 Connection Plate uses a 40 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions that have a male G 1/8″ Thread.

40 BUTTON VALVE

A-315005631.50.056

The 40 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup’s valve will not open, causing no loss of vacuum while the other cups pick up the load.

F50 Cups with Valves

Connection Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F50-NEO/VALVE
(Nitrile)
A-3150051P31.50.051P
F50-2.30.05UV

G 1/8″ Female

2.10
(52.8)

1.10
(27.0)

9.33
(4.23)

21.00
(9.53)

F50-SIT/VALVE
(Translucent Silicone)
A-3150051S31.50.051S
F50-2.10.05UV

G 1/8″ Female

2.10
(52.8)

1.10
(27.0)

9.33
(4.23)

21.00
(9.53)

Fitting & Valve for F50 Cups

Notes

Suspensions

50 CONNECTION PLATE

A-315014531.50.145

The 50 Connection Plate uses a 50 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions that have a male G 1/8″ Thread.

50 BUTTON VALVE

A-315005731.50.057

The 50 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup’s valve will not open, causing no loss of vacuum while the other cups pick up the load.

F75 Cups with Valves

Connection Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F75-NEO/VALVE
(Nitrile)
A-3150078P31.50.078P
F75.30.07UV

G 1/8″ Female

3.02
(76.5)

0.60
(14.0)

26.67
(12.10)

60.00
(27.22)

F75-SIT/VALVE
(Translucent Silicone)
A-3150078S31.50.078S
F75.20.07UV

G 1/8″ Female

3.02
(76.5)

0.60
(14.0)

26.67
(12.10)

60.00
(27.22)

Fitting & Valve for F75 Cups

Notes

Suspensions

75 FITTING 1/8″

A-325000632.50.006
07UA

The 75 Fitting 1/8″ with 1/8″ female center port connection with optional M5 (10/32) female port often used as a blow-off port.

75 BUTTON VALVE

A-335003333.50.033

The 75 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup’s valve will not open, causing no loss of vacuum while the other cups pick up the load.

F110 Cups with Valves

Connection Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F110-NEO/VALVE
(Nitrile)
A-3150079P31.50.079P
F110.30.11UV

G 1/2″ Female

4.30
(112.5)

0.70
(19.0)

56.00
(25.40)

126.00
(57.15)

F110-SIT/VALVE
(Translucent Silicone)
A-3150079S31.50.079S
F110.20.11UV

G 1/2″ Female

4.30
(112.5)

0.70
(19.0)

56.00
(25.40)

126.00
(57.15)

Fitting & Valve for F150 Cups

Notes

Suspensions

110 FITTING 1/2″

A-325000732.50.007
11UA

The 110 Fitting 1/2″ with 1/2″ female center port connection with optional NPSF 1/8″ female port often used as a blow-off port.

110/150 BUTTON VALVE

A-335003433.50.034

The 110/150 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup’s valve will not open, causing no loss of vacuum while the other cups pick up the load.

F150 Cups with Valves

Connection Thread Size

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

Flat vacuum cup with valve

F150-NEO/VALVE
(Nitrile)
A-3150080P31.50.080P
F150.30.15UV

G 1/2″ Female

6.13
(155.6)

1.00
(25.0)

106.67
(48.38)

240.00
(108.86)

Flat vacuum cup with valve

F150-SIT/VALVE
(Translucent Silicone)
A-3150080S31.50.080S
F150.20.15UV

G 1/2″ Female

6.13
(155.6)

1.00
(25.0)

106.67
(48.38)

240.00
(108.86)

Fitting & Valve for F150 Cups

Notes

Suspensions

150 FITTING 1/2″

A-325000832.50.008
11UA

The 150 Fitting 1/2″ with 1/2″ female center port connection with optional NPSF 1/8″ female port often used as a blow-off port.

110/150 BUTTON VALVE

A-335003433.50.034

ANVER Valve Cup Assemblies

Many new Valve Cup Assembly options are now available by combining select ANVER cups and ANVER fittings to form ‘ANVER Valve Cup Assemblies.’ The chart below shows each completed assembly. The cup photo under ‘Made from This Cup…’ links to technical and ordering information for the appropriate cup; the fitting photo under ‘…and this Fitting’ links to technical and ordering information for the appropriate fitting.

ANVER Valve Cup Assembly		Made from this Cup…	+	…and this Fitting
Photo	Description	Made from this Cup…	+	…and this Fitting
	Made from Cup F77-NBR and Fitting HS18-SV-SS		+
	Made from Cup F77-SIT and Fitting HS18-SV-SS		+
	Made from Cup F85-NBR and Fitting HS18-SV-SS		+
	Made from Cup F85-SIT and Fitting HS18-SV-SS		+
	Made from Cup F95-NBR and Fitting HS18-SV-LL		+
	Made from Cup F95-SIT and Fitting HS18-SV-LL		+

ANVER Valve Cup Assembly		Made from this Cup…	+	…and this Fitting
Photo	Description	Made from this Cup…	+	…and this Fitting
	Made from Cup F77-NBR and Fitting HS18-G-SV-SS		+
	Made from Cup F77-SIT and Fitting HS18-G-SV-SS		+
	Made from Cup F85-NBR and Fitting HS18-G-SV-SS		+
	Made from Cup F85-SIT and Fitting HS18-G-SV-SS		+
	Made from Cup F95-NBR and Fitting HS18-G-SV-LL		+
	Made from Cup F95-SIT and Fitting HS18-G-SV-LL		+

The “G” thread is also known as BSPP, commonly used worldwide for vacuum applications.

Flat vacuum cup with valve

Note:

All cups shown above are identical to P-Style size and shape. The static column is the cup dimensions without a load as given by P-Style.
The compressed column specifications are the important ones to make sure everything fits. It is the actual size of the cup after full compression (being flattened out) on a level load, which is slightly different from the F series. The bigger the cup, the greater the enlarging of the diameter. A lower vacuum level will lessen this compression or flattening out; however, make sure to leave enough room for the cup under vacuum in your design.

Generic suction cups

CV Vacuum Check Valves BVC Miniature Ball Valves BVV Vented Vacuum Ball Valves SV Vacuum Slide Valves Miniature Vacuum Relief Valves ASV Vacuum Sensing Valves

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.

ANVER P-Series Flat Vacuum Cups with Valves, F30 to F150

Product

Related pages

Need an ANVER system for your load?