ANVER Vertical Vacuum Lifters

This lightweight electric-powered vertical vacuum lifter is designed to significantly reduce the effort of lifting vertical loads while providing powerful suction force. Built with safety in mind, these lifters are loaded with protective features including: a VLS, 9V battery powered vacuum leakage sensor and warning system; an attach/release pendant; and locking knobs on the adjustable vacuum pad, slide assemblies. Rated at a maximum vacuum level of 24 in. Hg (609.6 mm Hg) at sea level with a 4:1 safety factor on vacuum holding (unless otherwise specified).

Features:

• EP1001 vacuum generator with vacuum gauge.
• Vacuum attach/release pendant control.
• Power required: 115V/60hz/1ph/5A. 15 amp service required.
• Vacuum pump/motor 4.3 SCFM (121.8 l/min), 1/2 HP; equipped with thermal sensor to prevent overheating and 100% duty cycle.
• VLS, 9V battery powered vacuum leakage sensor and warning system.
• Resettable circuit breaker for vacuum pump.
• Electrical cord with twist lock, male and female receptacles.
• Check valve to halt loss of vacuum in case of electrical power failure.
• Removable leg extensions for handling a variety of load sizes.
• Lifter can be broken down to ship in a smaller package.

Lifter shown with leg extensions

Lifter shown without leg extension
(Shipped in this position for export crate)

The lightweight electric-powered (EVL) and air-powered (AVL) vertical vacuum lifters are designed to significantly reduce the effort of lifting vertical loads while providing powerful suction force. Built with safety in mind, these lifters are loaded with protective features including: a VLS, 9V battery powered vacuum leakage sensor and warning system; an attach/release slide valve with safety lock (EVL-Series only); and locking knobs on the adjustable vacuum pad, slide assemblies, and crossarms (when applicable). The EVL and AVL Series lifters are capacity rated at a maximum vacuum level of 24 in. Hg (609.6 mm Hg) at sea level with a 4:1 safety factor on vacuum holding (unless otherwise specified).

Constructed with an ergonomic lifter handlebar and welded steel lifting frame, operators can use this equipment with ease and comfort for a wide range of loads and applications.

*Load weight and depth affect the final angle that the lifter achieves. Consult ANVER for loads thicker than 2 in. (51mm) due to center of gravity offset.

Note: The unit weight does not include optional accessories.

Electric powered EVL-Series

Features

• EP1001 vacuum generator with vacuum gauge and master on/off switch
• Power required: 115V/60hz/1ph/5A. 15 amp service required.
• Vacuum pump/motor 4.3 SCFM (121.8 l/min), 1/2 HP; equipped with thermal sensor to prevent overheating and 100% duty cycle.
• VLS, 9V battery powered vacuum leakage sensor and warning system.
• Resettable circuit breaker for vacuum pump.
• Electrical cord with twist lock, male and female receptacles.
• Check valve to halt loss of vacuum in case of electrical power failure.

Air powered AVL-Series

Features

• AL1001 vacuum generator with vacuum and pressure gauges and attach/release switch mounted on the enclosure.
• Power required: 90psi; clean, dry compressed air, 6.1 SCFM (172.7 l/min)
• 3/8 NPT air inlet with locking slide valve, 100% duty cycle.
• VLS, 9V battery powered vacuum leakage sensor and warning system.
• Pre-set pressure regulator to allow lifter to be operated on lines with higher supply pressure
• Single-stage venturi with check valve to halt loss of vacuum from generator in case of air supply failure

Vertical lifting
View chart

Vertical lifters for handling loads upright

These are quality, U.S. made vacuum lifters that feature rugged construction and quality components designed to load panels off near-vertical racks and onto other near-vertical tables. They are similar to standard horizontal lifters, but they are designed to handle upright loads. Vertical lifters are designed with a four to one (4 to 1) safety factor on vacuum holding with special non-skid vacuum cups. While these vacuum lifters are priced higher than a horizontal vacuum lifter, they are much less expensive than a powered tilter. Vertical vacuum lifters offer quick attach and release functionality and offer damage-free handling. They can be just the handling tool your factory needs.

Model #: E10M4-58-2/24V
Description: Four Pad Electric Powered Vertical Lifter
Application: Lifting & Handling Steel Doors 6 ft x 2 ft (1.8 m x 0.6 m) up to 100 lb (45 kg)

Model #: EV20S-36C-OC
Description: Single Pad Electric Powered Vertical Vacuum Lifter with C-Style Frame
Application: Lifting & Handling Sheet Metal Enclosures

Model #: E20M4-48-2/27V
Description: Four Pad Electric Vertical Vacuum Lifter with Custom Oval Cups
Application: Lifting & Handling Partial Cone Skins, 10 ft x 6 ft (3.0 m x 1.8 m) up to 200 lb (91 kg)

Model #: E25M2-36V
Description: Two Pad Electric Powered Vertical Vacuum Lifter
Application: Lifting & Handling Glass Sheet 6 ft x 5 ft (1.8 m x 1.5 m) weighing up to 250 lb (113 kg)

Model #: E25M2-38V
Description: Two Pad Electric Powered Vertical Vacuum Lifter
Application: Lifting & Handling Insulated Glass 8 ft x 5 ft (2.4 m x 1.5 m) weighing up to 250 lb (113 kg)

Model #: E25M2-50V-SP
Description: Two Pad Electric Powered Vertical Vacuum Lifter with Special Frame
Application: Lifting & Handling Glass Panes 8 ft x 4 ft (2.4 m x 1.2 m) up to 250 lb (113 kg)

Model #: E30M4-36X24-FV
Description: Four Pad Electric Powered Vertical Lifter
Application: Lifting & Handling Fiberglass Panels 12 ft x 4 ft (3.7 m x 1.2 m) up to 300 lb (136 kg)

Model #: E50M2-30V-C
Description: Two Pad Electric Powered Vertical Vacuum Lifter with C-Style Frame
Application: Lifting & Handling Window Panes 7 ft x 5 ft (2.1 m x 1.5 m) up to 500 lb (227 kg)

Model #: EV50M6-86-2/53
Description: Six Pad Electric Powered Vertical Lifter
Application: Lifting & Handling Glass Panels 11 ft x 6 ft (3.4 m x 1.8 m) up to 500 lb (227 kg)

Model #: EV55M4-70-2/53
Description: Four Pad Electric Powered Vertical Vacuum Lifter
Application: Lifting & Handling Framed Glass Panels 10 ft x 7 ft (3.1 m x 2.1 m) up to 550 lb (250 kg)

Model #: EV150M6-100×27
Description: Six Pad Electric Powered Vertical Vacuum Lifter
Application: Lifting & Handling Glass Panes 11 ft x 5 ft (3.4 m x 1.5 m) up to 1500 lb (680 kg)

Model #: E150M6-110X44-V
Description: Six Pad Electric Powered Vertical Vacuum Lifter
Application: Lifting & Handling Glass Sheet, 12 ft x 6 ft (3.7 m x 1.8 m) weighing up to 1500 lb (680 kg)

Model #: E150M6-110X44-V
Description: Six Pad Electric Powered Vertical Vacuum Lifter
Application: Lifting & Handling Metal Sheet, 12 ft x 5 ft (3.7 m x 1.5 m) weighing up to 1500 lb (680 kg)

Model #: E150M12-110X55F
Description: Twelve Pad Electric Powered Vertical Vacuum Lifter with Soft-Touch Bellows Cups
Application: Lifting & Handling Glass Plates 204″ x 130″ (518 cm x 330 cm) up to 1500 lb (680 kg)

Model #: EVB160M10-110-4/44
Description: Ten Pad Electric Powered Vertical Vacuum Lifter with Rolling Frame
Application: Lifting & Handling Wall Panels 17 ft x 9 ft (5.2 m x 3 m) weighing up to 1600 lb (725 kg)

Model #: EV200M8-110X44 (82000843)
Description: Eight Pad Electric Powered Vertical Vacuum Lifter
Application: Lifting & Handling Glass Plates 12 ft x 10 ft (3.7 m x 3.1 m) up to 2000 lbs (907 kg)

Model #: A10M2-36-V-C
Description: Two Pad Air Powered Custom Vertical Lifter
Application: Lifting Titanium Cone Sections 55″ x 65″ (1.4 m x 1.7 m) up to 100 lb (45 kg)

Model #: A20M4-30X30V-C
Description: Four Pad Air Powered Vertical Vacuum Lifter with Special “C” Frame
Application: Curved Glass Panels 5 ft x 4 ft (1.5 m x 1.2 m) up to 200 lb (91 kg)
Notes: This unit is typically for taking glass windows and panes in and out of a box container. This model is available with electric, battery and air vacuum power.
Interesting features: This unit has a movable bail to adjust to different thickness windows. The unit is equipped with an optional VLS leakage sensor and has virtually instant attach and release.

Model #: A25M2-36V
Description: Two Pad Compressed Air Powered Vertical Vacuum Lifter
Application: Lifting & Handling Fiberglass Covers 5 ft x 4 ft (1.5 m x 1.2 m) up to 250 lbs (113 kg)

Model #: A25M2-26VF
Description: Two Pad Compressed Air Powered Vertical Vacuum Lifter
Application: Lifting & Handling Window Panes 7 ft x 2 ft (2.1 m x 0.6 m) up to 250 lb (113 kg)

Model #: A25M4-30-2/44V
Description: Four Pad Air Powered Vertical Vacuum Lifter
Application: Lifting & Handling Framed Doors 5 ft x 2 ft (1.5 m x 0.6 m) up to 250 lb (113 kg)

Model #: A25M4-36-2/30V
Description: Four Pad Air Powered Vertical Lifter
Application: Lifting & Handling Glass Sheets 6 ft x 4 ft (1.8 m x 1.2 m) up to 250 lb (113 Kg)

Model #: A25M4-48-2/30V
Description: Four Pad Air Powered Vertical Lifter
Application: Lifting & Handling Glass Sheets 8 ft x 4 ft (2.4 m x 1.2 m) up to 250 lb (113 kg)

Model #: VPF-05 Vacuum Generator with PA95Q-3V-SP Vacuum Pad Attachment
Description: Electric Powered Vertical Vacuum Lifter
Application: Lifting and Packing Flat-Screen or Curved-Screen Televisions weighing up to 375 lb (170 kg)*

Model #: A37.5M3V-JE20H
Description: Three Pad Custom Air Powered Vertical Lifter
Application: Lifting & Handling TV Sets up to 375 lb (170 kg)

Model #: A40M4-86V-FP
Description: Four Pad Air Powered Custom Vertical Lifter with Foam Pads
Application: Lifting & Handling Limestone Window Sills 10 ft x 1 ft (3.0 m x 0.3 m) up to 400 lb (181 kg)

Model #: AV50M2-20HFX (83000250)
Description: Two Pad Air Powered Vertical Lifter
Application: Vertically Lifting & Handling Glass Panes 6 ft x 5 ft (1.8 m x 1.5 m) up to 500 lb (227 kg)

Model #: A50M4-48-2/48V
Description: Four Pad Air Powered Vertical Lifter
Application: Lifting & Handling Glass Sheets 9 ft x 9 ft (2.7 m x 2.7 m) up to 500 lb (227 Kg)

Model #: A80M8-86-4/44V
Description: Eight Pad Air Powered Vertical Vacuum Lifter
Application: Lifting & Handling Glass Windows 12 ft x 5 ft (3.7 x 1.5 m) up to 800 lb (363 kg)

Model #: A100M4-48XV
Description: Four Pad Air Powered Custom Vertical Vacuum Lifter
Application: Lifting & Handling Glass Panes 8 ft x 8 ft (2.4 m x 2.4 m) weighing up to 1000 lb (454 kg)

Model #: A150M12-110-4/53V
Description: Twelve Pad Air Powered Vertical Vacuum Lifter
Application: Lifting & Handling Glass Panes 12 ft x 8 ft (3.7 m x 2.4 m) weighing up to 1500 lb (680 Kg)

Model #: AVL200M2-61FP-C (83000330)
Description: Two Pad Compressed Air Powered Vertical Vacuum Lifter with Foam Pads
Application: Lifting & Handling Granite Slabs 7 ft x 5 ft (2.1 m x 1.5 m) up to 2000 lbs (907 kg)

Model #: A25M2-36V-PROT
Description: Two Pad Air Powered Vertical Lifter with Powered Rotation
Application: Lifting & Rotating Steel Doors 8 ft x 4 ft (2.4 m x 1.2 m) up to 250 lb (113 kg)

Model #: E25M4-PROT
Description: Four Pad Electric Powered Vacuum Lifter with Powered Rotator
Application: Lifting and Rotating Glass Panels weighing up to 250 lb (113 kg)

Model #: A50M4-P-ROTA
Description: Four Pad Air Powered Vertical Vacuum Lifter with 180° Powered Rotation
Application: Lifting & Rotating Glass Panes 6 ft x 6 ft (1.8 m x 1.8 m) up to 500 lb (227 kg)

Model #: EV50M4-86-2/32PR (82001052)
Description: Four Pad Electric Powered Vertical Vacuum Lifter with 360° Powered Rotation
Application: Lifting and Rotating Metal Panels 10 ft x 6 ft (3.2 m x 1.8 m) up to 500 lb (227 kg)

Model #: EV100M4-86PR360 (82000720)
Description: Four Pad Electric Powered Vertical Vacuum Lifter with 360° Powered Rotator
Application: Lifting and Rotating Glass Panels 10 ft x 4 ft (3.0 m x 1.2 m) up to 1000 lb (454 kg)

Model #: EV100M4-86-2/44-PROT
Description: Four Pad Electric Powered Vertical Vacuum Lifter with Powered Rotator
Application: Lifting and Rotating Glass Panes 130 in. x 60 in. (3302 mm X 1524 mm) weighing up to 1000 lb (454 kg)

Model #: EV100M4-86-2/44PROT
Description: Four Pad Electric Powered Vertical Vacuum Lifter with Powered Rotation
Application: Lifting & Rotating Glass Sheet, 130 in. x 60 in. (3302 mm x 1524 mm) weighing up to 1000 lb (454 kg)

Model #: EV200M4-88-2/44PR (82000766)
Description: Four Pad Electric Powered Vertical Vacuum Lifter with 360° Powered Rotator
Application: Lifting and Rotating Metal Plate 110″ x 60″ (279 cm x 152 cm) up to 2000 lb (907 kg)

Model #: E10M2-46-MVR-SP
Description: Two Pad Electric Powered Vacuum Lifter with Manual Rotate
Application: Lifting & Rotating Aluminum Fuel Tanks 83″ x 18″ (2.1 m x 0.4 m) up to 100 lb (45 kg)

Model #: E12M2-MROT-OC
Description: Two Pad Electric Powered Custom Vertical Vacuum Lifter with Manual Rotation
Application: Lifting & Rotating Steel Cylinders up to 120 lb (54 kg)

Model #: A15M2-36-VMR
Description: Two Pad Air Powered Vertical Vacuum Lifter with Manual Rotate
Application: Lifting & Rotating Air Conditioners 16″ x 16″ x 42″ (0.4 m x 0.4 m x 1.0 m) weighing up to 150 lb (68 kg)

Model #: AV20M2-36C-MR
Description: Air Powered Vertical Vacuum Lifter with Manual Rotation
Application: Lifting & Rotating Metal Cabinets 19″ x 38″ x 34″ (48 cm x 99 cm x 86 cm) up to 200 lbs (91 kg)

Model #: A25M2-24-VMR
Description: Two Pad Air Powered Vertical Lifter with Manual Rotation
Application: Lifting & Rotating Steel Boxes 3 ft x 2 ft (0.9 m x 0.6 m) up to 250 lb (113 kg)

Model #: EVL25M2-24MR (82000702)
Description: Two Pad Electric Powered Vertical Lifter with Manual Rotation
Application: Lifting & Rotating Metal Plates 5 ft x 4 ft (1.5 m x 1.2 m) up to 250 lb (113 kg)

Model #: AVL25M2-24MR
Description: Two Pad Air Powered Vertical Lifter with Manual Rotate
Application: Lifting & Rotating Steel Plates 8 ft x 4 ft (2.4 m x 1.2 m) up to 250 lbs (113 kg)

Model #: AVL25M2-36MR
Description: Two Pad Air Powered Vertical Lifter with Manual Rotate
Application: Lifting & Rotating Smooth Aluminum Panels 8 ft x 4 ft (2.4 m x 1.2 m) up to 250 lbs (113 kg)

Model #: A25M2-48VMR
Description: Two Pad Air Powered Vertical Vacuum Lifter with Manual Rotation
Application: Lifting & Rotating Fiberglass Tubs 6 ft x 3 ft (1.8 m x 1.0 m) up to 250 lb (113 kg)

Model #: AVL25M2-60MR
Description: Two Pad Air Powered Vertical Lifter with Manual Rotate
Application: Lifting & Rotating Metal Doors 8 ft x 4 ft (2.4 m x 1.2 m) up to 250 lbs (113 kg)

Model #: AV50M2-48MR (83000265)
Description: Two Pad Air Powered Vertical Lifter with Manual Rotate
Application: Lifting & Rotating Glass Panels 8 ft x 6 ft (2.4 m x 1.8 m) up to 500 lb (227 kg)

Model #: AV50M4-48X28MR (83000256)
Description: Compressed Air Powered Vertical Lifter with Manual Rotation
Application: Lifting, and Rotating Smooth, Non-Porous Panels 80″ x 48″ (2.0 m x 1.2 m), up to 500 lb (227 kg)

Model #: AV50A-MROT
Description: Single Pad Compressed Air Powered Custom Vertical Vacuum Lifter and Rotator
Application: Lifting and Rotating Enclosures from the Rear weighing up to 500 lb (227 kg)

Model #: E50M4-110-2/44VMR
Description: Four Pad Electric Powered Vertical Vacuum Lifter with Manual Rotation
Application: Lifting & Rotating Glass Sheets 12 ft x 7 ft (3.6 m x 2.1 m) up to 500 lb (227 kg)

Model #: E70M4-CG
Description: Four Pad Electric Powered Vacuum Lifter with Manual Rotator
Application: Lifting & Rotating Glass Panes 7 ft x 5 ft (2.2 m x 1.5 m) weighing up to 700 lb (320 kg)

Model #: E70M4-CG
Description: Four Pad Electric Powered Vacuum Lifter with Manual Rotator
Application: Lifting & Rotating Glass Panes 7 ft x 5 ft (2.2 m x 1.5 m) weighing up to 700 lb (320 kg)

Model #: EMC100M4-46EMVR
Description: Four Pad Electric Powered Vertical Vacuum Lifter with Manual Rotation
Application: Lifting & Rotating Glass Panels 130″ x 60″ (330 cm x 152 cm) up to 1000 lb (454 kg)