Vietnam+84 332 839 268 Taiwan+886 3 451 8806 Send requestreply in 24 h

FullSharp · since 1991

Equipment › ANVER Vacuum Lifters › 180° vacuum flippers

ANVER · Made in USA

ANVER 180° Vacuum Flippers for One-Person Load Flipping

The ANVER Upender 180° Flipper lets one person lift a panel, turn it over to inspect the other side and place it in a jig. Electric, air powered and custom models.

Request a quote

Electric powered vacuum lifter with 180° powered flip

Powered vacuum lifters for one-person flipping of loads

Made in the USA!

Manufacturer PDF

ANVER EF25M2-48C180 electric vacuum flipper lifting a panel

ANVER EF25M2-48C180 with the panel turned over

ANVER EF25M2-36C180 electric 180° flipper

ANVER’s Upender 180° Flipper is a C-frame style lifter that lets one person lift sheets and panels, invert them, inspect the other side, and then place them in jigs for assembly or secondary operations. Featuring two double vacuum suction pads to assure even loading and stress-free handling.

Features:

EP1001 vacuum generator with vacuum gauge and master on/off switch.
Tilt control pendant with 10 ft. coil cord.
Power required: 115V/60hz/1ph/5A. 18 amp service required.
Vacuum pump/motor 4.3 SCFM (121.8 l/min), 1/2 HP; equipped with thermal sensor to prevent overheating and 100% duty cycle.
VLS, 9V battery powered vacuum leakage sensor and warning system.
Resettable circuit breaker for vacuum pump.
Electrical cord with twist lock, male and female receptacles.
Check valve to halt loss of vacuum in case of electrical power failure.
Load placement guides.
Self-balancing lifting shackle.

ANVER 180° upender flipper in use

Dimension drawing of ANVER EF25M2-C180 flippers

Specifications
Lifter Model	EF25M2-36C180	EF25M2-48C180	EF25M2-60C180	EF25M2-72C180	EF25M2-84C180
Rated Load Capacity [lbs (kg.)]	250 (113)	250 (113)	250 (113)	250 (113)	250 (113)
Unit Weight [lbs (kg.)]	178 (81)	183 (83)	188 (86)	193 (88)	198 (90)
A Pad Distances Max. [in. (mm)]	43 (1092)	55 (1397)	67 (1701)	79 (2006)	91 (2311)
A Pad Distances Min. [in. (mm)]	28 (712)	28 (712)	28 (712)	28 (712)	28 (712)
B Beam Length [in. (mm)]	36 (914)	48 (1219)	60 (1524)	72 (1829)	84 (2134)
C Pad Dimension [in. (mm)]	9.25 (235)	9.25 (235)	9.25 (235)	9.25 (235)	9.25 (235)
D Maximum Lifter Headroom [in. (mm)]	47 (1194)	47 (1194)	47 (1194)	47 (1194)	47 (1194)
Maximum Load Length x Width [ft. (M)]	5 x 4 (1.5 x 1.2)	6 x 4 (1.8 x 1.2)	8 x 4 (2.4 x 1.2)	10 x 4 (3.0 x 1.2)	12 x 4 (13.7 x 1.2)
Maximum Load Thickness [in. (mm)]	1 (25.4)	1 (25.4)	1 (25.4)	1 (25.4)	1 (25.4)
Pad Number	VP92	VP92	VP92	VP92	VP92

Air powered vacuum lifter with 180° powered flip

Powered vacuum lifters for one-person flipping of loads

Made in the USA!

Manufacturer PDF

ANVER AF25M2-48C180 air powered 180° flipper

180° flipping-upending motion
180° flipping-upending
Application chart

Features:

AL1001UP vacuum generator with vacuum and pressure gauges
3/8 NPT air inlet with locking slide valve
VLS System, 9V battery powered vacuum leakage sensor and warning system
Pre-set pressure regulator to allow lifter to be operated on lines with higher supply pressure
Single-stage Venturi with check valve to halt loss of vacuum from generator in case of air supply failure
Heavy duty air cylinder to provide 180° FLIP
Handle mounted lever valve for tilt controls
Max. load capacity: 250 lbs. (113 kg)
Power required: 90-120 psi; clean, dry compressed air, 10.5 SCFM (297.3 l/min)
Energy Air Saver, the vacuum controlled valve shuts off the flow of compressed air to the pump when the pre-set level is reached, and consequently the consumption of compressed air is minimized.
Tilt speed: variable with 100% duty cycle, will not overheat

ANVER 180° upender flipper in use

Dimension drawing of ANVER AF25M2-C180 flippers

Specifications
Lifter Model	AF25M2-36C180	AF25M2-48C180	AF25M2-60C180	AF25M2-72C180	AF25M2-84C180
Rated Load Capacity [lbs (kg.)]	250 (113)	250 (113)	250 (113)	250 (113)	250 (113)
Unit Weight [lbs (kg.)]	178 (81)	183 (83)	188 (86)	193 (88)	198 (90)
A Pad Distances Max. [in. (mm)]	43 (1092)	55 (1397)	67 (1701)	79 (2006)	91 (2311)
A Pad Distances Min. [in. (mm)]	28 (712)	28 (712)	28 (712)	28 (712)	28 (712)
B Beam Length [in. (mm)]	36 (914)	48 (1219)	60 (1524)	72 (1829)	84 (2134)
C Pad Dimension [in. (mm)]	9.25 (235)	9.25 (235)	9.25 (235)	9.25 (235)	9.25 (235)
D Maximum Lifter Headroom [in. (mm)]	47 (1194)	47 (1194)	47 (1194)	47 (1194)	47 (1194)
Maximum Load Length x Width [ft. (M)]	5 x 4 (1.5 x 1.2)	6 x 4 (1.8 x 1.2)	8 x 4 (2.4 x 1.2)	10 x 4 (3.0 x 1.2)	12 x 4 (13.7 x 1.2)
Maximum Load Thickness [in. (mm)]	1 (25.4)	1 (25.4)	1 (25.4)	1 (25.4)	1 (25.4)
Pad Number	VP92	VP92	VP92	VP92	VP92

Powered vacuum lifters for one-person flipping of loads – four pad

Manufacturer PDF

ANVER EF50M4-86C180 four pad 180° flipper

ANVER’s Upender 180° Flipper is a C-frame style lifter that lets one person lift sheets and panels, invert them, inspect the other side, and then place them in jigs for assembly or secondary operations. Featuring four double vacuum suction pads to assure even loading and stress-free handling.

Features:

VPE1-GEN3 vacuum generator with vacuum control module, vacuum gauges and vacuum leakage sensor and warning system.
Attach/Release Pendant with Tilt Controls & Safety Lock-Out.
Power required: 120V/1PH/60HZ, 20 Amps.
Vacuum pump/motor 4.3 SCFM (121.8 l/min), 1/2 HP; equipped with thermal sensor to prevent overheating and 100% duty cycle.
Resettable circuit breaker for vacuum pump.
Electrical cord with twist lock, male and female receptacles.
Check valve to halt loss of vacuum in case of electrical power failure.
Heavy duty helical worm gearbox and motor.
Three position lifting shackle.

Dimension drawing of ANVER EF50M4-86C180

Specifications
Lifter Model	EF50M4-86C180-2/44
Rated Load Capacity [lbs (kg.)]	500 (227)
Unit Weight [lbs (kg.)]	1050 (476)
A Pad Distances Max. [in. (mm)]	94 (2387)
A Pad Distances Min. [in. (mm)]	40 (1016)
B Beam Length [in. (mm)]	86 (2184)
C Pad Dimension [in. (mm)]	9.13 (232)
D Crossarm Length [in. (mm)]	44 (1123)
E Pad Distances Along Crossarm Max. [in. (mm)]	49 (1244)
E Pad Distances Along Crossarm Min. [in. (mm)]	24 (610)
F Handlebar Length [in. (mm)]	53 (1346)
G Handlebar Height Max. [in. (mm)]	52 (1321)
G Handlebar Height Min. [in. (mm)]	22 (559)
H Maximum Lifter Headroom [in. (mm)]	81 (2058)
Maximum Load Length x Width [ft. (M)]	12 x 6 (3.6 x 1.8)
Maximum Load Thickness [in. (mm)]	1.25 (31)
Pad Number	VP92

13600169 A

Powered vacuum lifters for one-person flipping of loads – twelve pad

Manufacturer PDF

ANVER twelve pad flipper: lifting the panel

ANVER twelve pad flipper: start of the flip

ANVER twelve pad flipper: flipping past 90°

ANVER twelve pad flipper: panel turned over 180°

ANVER’s Upender 180° Flipper is a C-frame style lifter that lets one person lift sheets and panels, invert them, inspect the other side, and then place them in jigs for assembly or secondary operations. Featuring twelve double vacuum suction pads to assure even loading and stress-free handling.

Features:

VPE1-GEN3 vacuum generator with vacuum control module, vacuum gauges and vacuum leakage sensor and warning system.
Attach/Release Pendant with Tilt Controls & Safety Lock-Out.
Power required: 120V/1PH/60HZ, 20 Amps.
Vacuum pump/motor 4.3 SCFM (121.8 l/min), 1/2 HP; equipped with thermal sensor to prevent overheating and 100% duty cycle.
Resettable circuit breaker for vacuum pump.
Electrical cord with twist lock, male and female receptacles.
Check valve to halt loss of vacuum in case of electrical power failure.
Heavy duty helical worm gearbox and motor.
Three position lifting shackle.

Dimension drawing of ANVER EF80M12-166C180

Specifications
Lifter Model	EF80M12-166C180-6/44
Rated Load Capacity [lbs (kg.)]	800 (362)
Unit Weight [lbs (kg.)]	1140 (517)
A Pad Distances Max. [in. (mm)]	174 (4419)
A Pad Distances Min. [in. (mm)]	79 (1998)
B Beam Length [in. (mm)]	166 (4216)
C Pad Dimension [in. (mm)]	9.25 (235)
D Crossarm Length [in. (mm)]	44 (1123)
E Pad Distances Along Crossarm Max. [in. (mm)]	49 (1244)
E Pad Distances Along Crossarm Min. [in. (mm)]	24 (610)
F Handlebar Length [in. (mm)]	72 (1829)
G Handlebar Height Max. [in. (mm)]	43 (1092)
G Handlebar Height Min. [in. (mm)]	22 (559)
H Maximum Lifter Headroom [in. (mm)]	81 (2058)
Maximum Load Length x Width [ft. (M)]	16 x 6 (4.8 x 1.8)
Maximum Load Thickness [in. (mm)]	1 (25)
Pad Number	VP92

13600168 A

Custom powered vacuum lifters with powered 180° flipping-upending

For one-person load manipulation

ANVER offers custom vacuum lifters with powered 180 degree flipping/upending for easy one-person load manipulation.

ANVER’s Upender 180° Flipper is a C-frame style lifter that lets one person lift sheets and panels, invert them, inspect the other side, and then place them in jigs for assembly or secondary operations. Featuring eight double spring-loaded vacuum suction pads to assure even loading and stress-free handling, this inverter uses clean electric worm gear drive actuators.