-
Products
Servo Balancing Hoists Read more
Server Lifter Read more
Vacuum Tube Lifters Read more
FULLSHARP Manipulators Read more
Pneumatic Jib Cranes Read more
Standard Structures Read more
FULLSHARP Rail Systems Read more
Lifts All Read more
Vacuum Lifting Pads Read more
Smart Electric Lifters (Taiwan) Read more
Smart Electric Lifters (China) Read more
Mini Cranes Read more
Air balancer Read more
Knight Global Servo Hoists Read more
Knight Global Manipulators Read more
Knight Global Rails Read more
Custom-designed lifters Read more
Electric Tow Tractors Read more
Plastic-Coated Steel Pipes Read more
Hoists Read more
All products Servo Balancing Hoists Server Lifter Vacuum Tube Lifters FULLSHARP Manipulators Pneumatic Jib Cranes Standard Structures FULLSHARP Rail Systems Lifts All Vacuum Lifting Pads Metal sheet lifting Glass panel lifting for installation Glass panel lifting for production Smart Electric Lifters (Taiwan) Smart Electric Lifters (China) Mini Cranes Semi-automatic mini cranes 400-500-1000kg Automatic mini cranes 1000-2000kg Air balancer Knight Global Servo Hoists Knight Global Manipulators Knight Global Rails Custom-designed lifters Electric Tow Tractors Plastic-Coated Steel Pipes Hoists COMEUP Electric Hoists ENDO Air Hoists KITO Electric Hoists - What do you need to lift
- Contact
Equipment › ANVER Vacuum Lifters › Manual tilt and rotate four pad lifters
ANVER AMC, EMC, BMC vacuum lifters with manual tilt and rotation
The AMC (compressed air), EMC (electric) and BMC (battery) series share a four pad frame with manual 90° tilt and 360° rotation. Specifications, drawings and other manual tilters follow.
AMC-Series vacuum lifters with manual 90° tilt and 360° manual rotation
Compressed air powered four pad lifters – capacity from 500 lb (227 kg) to 700 lb (317 kg)
ANVER vacuum manual tilters and upenders are loaded with safety features and have come to set the standard for safe tilting of loads. Each version has been revised over the years to perform better and last longer. The pads, vacuum generators, frame, controls, hardware, filters, safety features, handlebars etc. are all new and improved. Every aspect of the lifters has been redesigned and the latest represent the best tilters available.
The standard AMC-Series Compressed Air Powered Vacuum Lifters are designed to significantly reduce the effort of upending heavy loads while providing powerful suction force and 90 degree manual tilt and 360 degree manual rotation capability.
Built with safety in mind, these lifters/tilters are loaded with protective features including: a VLS, 9V battery powered vacuum leakage sensor and warning system; an attach/release slide valve with safety lock. The AMC-Series Lifters/Tilters are capacity rated at a maximum vacuum level of 24 in. Hg (609.6 mm Hg) with a 4:1 safety factor on vacuum holding (unless otherwise specified).
AMC-Series lifters come equipped with removable pad extensions. The vacuum pads can be mounted inline for handling long and narrow loads or without the extensions for handling short and narrow loads. Constructed with an ergonomic lifter handlebar and a welded steel lifting frame, operators can use this equipment with ease and comfort for a wide range of loads and applications.
*Load weight and depth affect the final angle that the lifter achieves. Consult ANVER for loads thicker than 1.18 in. (3 cm) due to center of gravity offset.
Compressed air powered specifications
| Specifications | ||
|---|---|---|
| Lifter model | AMC50M4-46E-MTR | AMC70M4-46E-MTR |
| Rated load capacity [lb (kg)] | 500 (227) | 700 (317) |
| Unit weight [lb (kg)] | 225 (102) | 265 (121) |
| Incoming power requirement [psi] | 90 | 90 |
| A Lifter headroom w/ extensions [in. (mm)] | 84 (2134) | 86 (2185) |
| B Pad distances w/ extensions [in. (mm)] | 47 (1194) | 50 (1270) |
| C Pad distances w/ extensions [in. (mm)] | 65 (1651) | 69 (1753) |
| D Vertical lifter depth [in. (mm)] | 32 (813) | 32 (813) |
| E Pad size [in. (mm)] | 9.13 (232) | 12 (305) |
| F Pad distances, inline [in. (mm)] | 14 (356) | 17 (432) |
| G Pad distances, inline [in. (mm)] | 76 (1931) | 80 (2032) |
| H Pad distances w/o extensions [in. (mm)] | 27 (686) | 30 (762) |
| J Pad distances w/o extensions [in. (mm)] | 31 (788) | 34 (864) |
| K Lifter headroom w/o extensions [in. (mm)] | 64 (1646) | 66 (1677) |
| Maximum plate dimensions [ft (m)] | 10 x 5 (3.0 x 1.5) | 10 x 5 (3.0 x 1.5) |
| Pad number | VP92 | VP122 |
13600178 A
EMC-Series vacuum lifters with manual 90° tilt and 360° manual rotation
Electric powered four pad lifters – capacity from 500 lb (227 kg) to 700 lb (317 kg)
ANVER vacuum manual tilters and upenders are loaded with safety features and have come to set the standard for safe tilting of loads. Each version has been revised over the years to perform better and last longer. The pads, vacuum generators, frame, controls, hardware, filters, safety features, handlebars etc. are all new and improved. Every aspect of the lifters has been redesigned and the latest represent the best tilters available.
The standard EMC-Series Electric Powered Vacuum Lifters are designed to significantly reduce the effort of upending heavy loads while providing powerful suction force and 90 degree manual tilt and 360 degree manual rotation capability.
Built with safety in mind, these lifters/tilters are loaded with protective features including: a VLS, 9V battery powered vacuum leakage sensor and warning system; an attach/release slide valve with safety lock. The EMC-Series Lifters/Tilters are capacity rated at a maximum vacuum level of 24 in. Hg (609.6 mm Hg) with a 4:1 safety factor on vacuum holding (unless otherwise specified).
EMC-Series lifters come equipped with removable pad extensions. The vacuum pads can be mounted inline for handling long and narrow loads or without the extensions for handling short and narrow loads. Constructed with an ergonomic lifter handlebar and a welded steel lifting frame, operators can use this equipment with ease and comfort for a wide range of loads and applications.
*Load weight and depth affect the final angle that the lifter achieves. Consult ANVER for loads thicker than 1.18 in. (3 cm) due to center of gravity offset.
Electric powered specifications
| Specifications | ||
|---|---|---|
| Lifter model | EMC50M4-46E-MTR | EMC70M4-46E-MTR |
| Rated load capacity [lb (kg)] | 500 (227) | 700 (317) |
| Unit weight [lb (kg)] | 235 (107) | 275 (125) |
| Incoming power requirement [AC] | 115V/1PH/60Hz 6 Amps | 115V/1PH/60Hz 6 Amps |
| A Lifter headroom w/ extensions [in. (mm)] | 84 (2134) | 86 (2185) |
| B Pad distances w/ extensions [in. (mm)] | 47 (1194) | 50 (1270) |
| C Pad distances w/ extensions [in. (mm)] | 65 (1651) | 69 (1753) |
| D Vertical lifter depth [in. (mm)] | 32 (813) | 32 (813) |
| E Pad size [in. (mm)] | 9.13 (232) | 12 (305) |
| F Pad distances, inline [in. (mm)] | 14 (356) | 17 (432) |
| G Pad distances, inline [in. (mm)] | 76 (1931) | 80 (2032) |
| H Pad distances w/o extensions [in. (mm)] | 27 (686) | 30 (762) |
| J Pad distances w/o extensions [in. (mm)] | 31 (788) | 34 (864) |
| K Lifter headroom w/o extensions [in. (mm)] | 64 (1646) | 66 (1677) |
| Maximum plate dimensions [ft (m)] | 10 x 5 (3.0 x 1.5) | 10 x 5 (3.0 x 1.5) |
| Pad number | VP92 | VP122 |
13600179 A
BMC-Series vacuum lifters with manual 90° tilt and 360° manual rotation
Battery powered four pad lifters – capacity from 500 lb (227 kg) to 700 lb (317 kg)
ANVER vacuum manual tilters and upenders are loaded with safety features and have come to set the standard for safe tilting of loads. Each version has been revised over the years to perform better and last longer. The pads, vacuum generators, frame, controls, hardware, filters, safety features, handlebars etc. are all new and improved. Every aspect of the lifters has been redesigned and the latest represent the best tilters available.
The standard BMC-Series Battery Powered Vacuum Lifters are designed to significantly reduce the effort of upending heavy loads while providing powerful suction force and 90 degree manual tilt and 360 degree manual rotation capability.
Built with safety in mind, these lifters/tilters are loaded with protective features including: a VLS, 9V battery powered vacuum leakage sensor and warning system; an attach/release slide valve with safety lock. The BMC-Series Lifters/Tilters are capacity rated at a maximum vacuum level of 24 in. Hg (609.6 mm Hg) with a 4:1 safety factor on vacuum holding (unless otherwise specified).
BMC-Series lifters come equipped with removable pad extensions. The vacuum pads can be mounted inline for handling long and narrow loads or without the extensions for handling short and narrow loads. Constructed with an ergonomic lifter handlebar and a welded steel lifting frame, operators can use this equipment with ease and comfort for a wide range of loads and applications.
*Load weight and depth affect the final angle that the lifter achieves. Consult ANVER for loads thicker than 1.18 in. (3 cm) due to center of gravity offset.
Battery powered specifications
| Specifications | ||
|---|---|---|
| Lifter model | BMC50M4-46E-MTR | BMC70M4-46E-MTR |
| Rated load capacity [lb (kg)] | 500 (227) | 700 (317) |
| Unit weight [lb (kg)] | 245 (112) | 285 (130) |
| DC generator battery power | 12V DC, 12 amp hours | 12V DC, 12 amp hours |
| A Lifter headroom w/ extensions [in. (mm)] | 84 (2134) | 86 (2185) |
| B Pad distances w/ extensions [in. (mm)] | 47 (1194) | 50 (1270) |
| C Pad distances w/ extensions [in. (mm)] | 65 (1651) | 69 (1753) |
| D Vertical lifter depth [in. (mm)] | 32 (813) | 32 (813) |
| E Pad size [in. (mm)] | 9.13 (232) | 12 (305) |
| F Pad distances, inline [in. (mm)] | 14 (356) | 17 (432) |
| G Pad distances, inline [in. (mm)] | 76 (1931) | 80 (2032) |
| H Pad distances w/o extensions [in. (mm)] | 27 (686) | 30 (762) |
| J Pad distances w/o extensions [in. (mm)] | 31 (788) | 34 (864) |
| K Lifter headroom w/o extensions [in. (mm)] | 64 (1646) | 66 (1677) |
| Maximum plate dimensions [ft (m)] | 10 x 5 (3.0 x 1.5) | 10 x 5 (3.0 x 1.5) |
| Pad number | VP92 | VP122 |
13600180 A
Powered vacuum lifters with manual tilting for one-person load manipulation
90° manual tilt
Application chart
ANVER offers electric and air powered vacuum lifters with manual 90 degree tilting capabilities for easy one-person manipulation, and available in lifting capacities up to 60,000 lb (26,600 kg) or more depending on your application needs.
ANVER is ready to assist you in choosing a vacuum lifter that will meet all of your material handling needs.
Examples of vacuum tilters:
A15M4-MR-GT-SP
A25M2-42-MUPR
E25M2-60MUP/R
A25M6-36/44V-MUPR
E100M4-CG
AV50M4-48X28MR
E25M2-48MUP
E25M4-48-2/33AMUP
E50M2-50MU-FX
E50M4-40X30FMUP
GT90M6-88E
GT150M6-63E
E300M3-68-FPFXGT
A8M2-VF-GT
A25M2-30VF-MUP
A25M2-30VF-MUP
A50M4-61-2/44MUP
Related pages
Need an ANVER system for your load?
Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.