VN EN TW
FullSharp
Vietnam+84 332 839 268Taiwan+886 3 451 8806Send requestreply in 24 h
About
Equipment
What do you need to lift
Completed projects
Catalogue
Contact
VNENTW
FullSharp · since 1991

Equipment › ANVER vacuum lifters › Standard lifting frames › LG920M4 4-pad lifting frame

ANVER LG920M4 4-pad vacuum lifting frame, 9,200 lb capacity

The LG920M4 series are 4-pad vacuum lifting frames rated up to 9,200 lb (4,173 kg) for carbon steel, stainless steel and non-ferrous plate such as aluminum. The table lists 4 frame models with their dimensions.

Request a quote

Four pad vacuum lifter lifting frames

For standard four pad lifters – capacity up to 9200 lb (4173 kg)

Manufacturer PDF

ANVER 4-pad vacuum lifting frame

ANVER’s standard lifting frames are built to order using modular components, so there are hundreds of possible combinations depending on the vacuum generator, beam, crossarms and vacuum cups selected.

ANVER vacuum lifters comply with ASME B30.20 and ASME BTH-1 standards. Specifications and rated capacities vary by configuration, and users remain responsible for full compliance with workplace safety, inspection, and operating regulations.

The LG920M4-Series four-pad lifting frames are ideal for handling carbon steel and stainless steel sheets, plates and non-ferrous materials like aluminum with a capacity up to 9200 lb (4173 kg). The type of vacuum lifter – mechanical, electric or battery – paired with the number of pads used will depend on your application needs.

Lifting frame shown with vacuum generator and/or optional accessories, which are sold separately. Unit weight does not include vacuum generator or optional equipment (parking stands, etc.). To calculate total unit weight, add the compatible generator weight to the lifting frame weight and deduct it from crane capacity.

Features
  • Fully welded rigid frame makes the load handling stable via a high hook point. Reinforcement bracing provided on longer length lifting beams.
  • The GF-Frame includes a main vacuum reservoir as a primary with a secondary reservoir running the entire length of the spreader beam, resulting in near instant attach time and maximizing productivity.
  • Front handlebar and end of beam tag line loops provided to facilitate maneuvering.
  • Quad mounted vacuum pads feature top & bottom springs to handle wavy plate.
  • Bolt-on sealing rings feature rugged seals that can be replaced easily. This can be done in minutes with the lifter resting on its parking stands (sold separately).
  • Standard modular construction allows quick service and/or replacement of Vac-Packs, as needed to minimize downtime.
LG920M4 lifting frame dimension drawing
Compatible vacuum generators
Electric or battery**
GF5T series vacuum generator
GF5T series
Lifting frame numberLG920M4-162LG920M4-198LG920M4-243LG920M4-288
Rated load capacity [lbs (kg)]9200 (4173)9200 (4173)9200 (4173)9200 (4173)
Approximate unit weight [lbs (kg)]1294 (587)1450 (658)2250 (1021)2900 (1316)
A Lifting frame headroom [in. (mm)]60 (1527)60 (1527)60 (1527)60 (1527)
B Spreader beam length [in. (mm)]162 (4115)198 (5029)243 (6172)288 (7315)
C Outer pad centers maximum [in. (mm)]144 (3658)180 (4572)225 (5715)270 (6858)
C Outer pad centers minimum [in. (mm)]96 (2439)120 (3048)150 (3810)180 (4572)
D Pad size [in. (mm)]Ø24 (61)Ø24 (61)Ø24 (61)Ø24 (61)
Maximum load size [ft (m)]16 x 6 (4.8 x 1.8)20 x 6 (6.1 x 1.8)25 x 6 (7.6 x 1.8)30 x 6 (9.1 x 1.8)
*Minimum load size [in. (mm)]51 x 26
(1296 x 661)		51 x 26
(1296 x 661)		51 x 26
(1296 x 661)		51 x 26
(1296 x 661)
Minimum load thickness at maximum length & width [in. (mm)]11 ga. (3)11 ga. (3)11 ga. (3).188 (5)
Vacuum pad numberVP235MQVP235MQVP235MQVP235MQ
Optional parking standsPST30-31-21PST30-31-21PST30-31-21PST30-31-21

*Minimum load sizes are with outer vacuum pads shut off (1/2 rated load). Load capacities at 24 in. Hg, sea level.

**Battery powered vacuum generators are only recommended when handling non-porous loads.

13600137 A

Various plate sizes can be handled by adjusting the vacuum pad positions on the beam

Pad positions on 4-pad frame, diagram 1
Vacuum pads in maximum position to handle maximum plate size.
Pad positions on 4-pad frame, diagram 2
Vacuum pads moved inwards to handle minimum plate size.
Pad positions on 4-pad frame, diagram 3
Center vacuum pads (1/2 capacity) used for short, narrow plates. Outer pads provided with shut-off valves.

Related pages

LG600M12 12-pad lifting frameLG600M8 8-pad lifting frameLG700M14 14-pad lifting frameLG750M10 10-pad lifting frameLG800M8 8-pad lifting frameLG900M12 12-pad lifting frameL100M4 H-style 4-pad lifting frameL50M4 H-style 4-pad lifting frameL80M8 8-pad lifting frameCustom air powered liftersEight pad custom liftersMulti-pad in-line lifters

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.

Contact us