VN EN TW
FullSharp
Vietnam+84 332 839 268Taiwan+886 3 451 8806Send requestreply in 24 h
About
Equipment
What do you need to lift
Completed projects
Catalogue
Contact
VNENTW
FullSharp · since 1991

Equipment › ANVER vacuum lifters › Standard lifting frames › LG750M10 10-pad lifting frame

ANVER LG750M10 10-pad vacuum lifting frame, 7,500 lb capacity

The LG750M10 series are 10-pad vacuum lifting frames rated up to 7,500 lb (3,402 kg) for carbon steel, stainless steel and non-ferrous plate such as aluminum. The table lists 6 frame models with their dimensions.

Request a quote

Ten pad vacuum lifter lifting frames

For standard ten pad lifters with adjustable crossarms – capacity up to 7500 lb (3402 kg)

Manufacturer PDF

ANVER 10-pad vacuum lifting frame

ANVER’s standard lifting frames are built to order using modular components, so there are hundreds of possible combinations depending on the vacuum generator, beam, crossarms and vacuum cups selected.

ANVER vacuum lifters comply with ASME B30.20 and ASME BTH-1 standards. Specifications and rated capacities vary by configuration, and users remain responsible for full compliance with workplace safety, inspection, and operating regulations.

The LG750M10-Series ten-pad lifting frames are ideal for handling carbon steel and stainless steel sheets, plates and non-ferrous materials like aluminum with a capacity up to 7500 lb (3402 kg). The type of vacuum lifter – mechanical, electric or battery – paired with the number of pads used will depend on your application needs.

Lifting frame shown with vacuum generator and/or optional accessories, which are sold separately. Unit weight does not include vacuum generator or optional equipment (parking stands, etc.). To calculate total unit weight, add the compatible generator weight to the lifting frame weight and deduct it from crane capacity.

Note: additional crossarm lengths are available for handling wider load sizes.

Features
  • Fully welded rigid frame makes the load handling stable via a high hook point. Reinforcement bracing provided on longer length lifting beams.
  • The GF-Frame includes a main vacuum reservoir as a primary with a secondary reservoir running the entire length of the spreader beam, resulting in near instant attach time and maximizing productivity.
  • Front handlebar and end of beam tag line loops provided to facilitate maneuvering.
  • Vacuum pads swivel and feature top & bottom springs to handle wavy plate.
  • Bolt-on sealing rings feature rugged seals that can be replaced easily. This can be done in minutes with the lifter resting on its parking stands (sold separately).
  • Standard modular construction allows quick service and/or replacement of Vac-Packs, as needed to minimize downtime.
LG750M10 lifting frame dimension drawing
Compatible vacuum generators
Electric or battery**
GF5T series vacuum generator
GF5T series
Lifting frame numberLG750M10-250-5/44FXLG750M10-298-5/44FXLG750M10-346-5/44FXLG750M10-394-5/44FXLG750M10-442-5/44FXLG750M10-490-5/44FX
Rated load capacity [lbs (kg)]7500 (3402)7500 (3402)7500 (3402)7500 (3402)7500 (3402)7500 (3402)
Approximate unit weight [lbs (kg)]1275 (578)2250 (1021)2375 (1075)2900 (1315)3150 (1429)3550 (1610)
A Lifting frame headroom [in. (mm)]67 (1698)67 (1698)67 (1698)67 (1698)67 (1698)67 (1698)
B Spreader beam length [in. (mm)]250 (6350)298 (7569)346 (8788)394 (10008)442 (11227)490 (12446)
C Outer pad centers maximum [in. (mm)]240 (6096)288 (7315)336 (8534)384 (9754)432 (10973)480 (12192)
C Outer pad centers minimum [in. (mm)]120 (3048)144 (3658)168 (4268)192 (4877)216 (5487)240 (6096)
D Crossarm length [in. (mm)]44 (1118)44 (1118)44 (1118)44 (1118)44 (1118)44 (1118)
E Pad centers along crossarm [in. (mm)]36 (914)36 (914)36 (914)36 (914)36 (914)36 (914)
F Pad diameter [in. (mm)]14.5 (368)14.5 (368)14.5 (368)14.5 (368)14.5 (368)14.5 (368)
Maximum load size [ft (m)]25 x 8
(7.6 x 2.4)		30 x 8
(9.1 x 2.4)		35 x 8
(10.7 x 2.4)		40 x 8
(12.2 x 2.4)		45 x 8
(13.7 x 2.4)		50 x 8
(15.2 x 2.4)
*Minimum load size w/ perpendicular crossarms [in. (mm)]17 x 53
(432 x 1347)		17 x 53
(432 x 1347)		17 x 53
(432 x 1347)		17 x 53
(432 x 1347)		17 x 53
(432 x 1347)		17 x 53
(432 x 1347)
*Minimum load size w/ pivoted crossarms [in. (mm)]52 x 26
(1321 x 661)		52 x 26
(1321 x 661)		52 x 26
(1321 x 661)		52 x 26
(1321 x 661)		52 x 26
(1321 x 661)		52 x 26
(1321 x 661)
Minimum load thickness at maximum length & width [in. (mm)]14 ga. (2)11 ga. (3)10 ga. (3.4).188 (5).25 (6.4).31 (8)
Vacuum pad numberVP145SVP145SVP145SVP145SVP145SVP145S
Optional parking standsPST30-31-21PST30-31-21PST30-31-21PST30-31-21PST30-31-21PST30-31-21

Note: additional crossarm lengths are available for handling wider load sizes.

*Minimum load sizes are with outer vacuum pads shut off (1/5 rated load). Load capacities at 24 in. Hg, sea level.

**Battery powered vacuum generators are only recommended when handling non-porous loads.

13600140 A

Various plate sizes can be handled by adjusting the crossarm positions on the beam

Crossarm and pad positions on 10-pad frame, diagram 1
Crossarms and vacuum pads in maximum position to handle maximum plate size.
Crossarm and pad positions on 10-pad frame, diagram 2
Crossarms can pivot to parallel with spreader beam to handle narrow plates.
Crossarm and pad positions on 10-pad frame, diagram 3
Crossarms adjustable to handle short and narrow plates.
Crossarm and pad positions on 10-pad frame, diagram 4
Inner crossarms (3/5 capacity) for use with smaller plates. Outer crossarms provided with shut-off valves.
Crossarm and pad positions on 10-pad frame, diagram 5
Inner crossarm (1/5 capacity) for use with smaller plates. Outer crossarms provided with shut-off valves.

Related pages

LG2560M8 8-pad lifting frameLG300M12 12-pad lifting frameLG350M14 14-pad lifting frameLG600M12 12-pad lifting frameLG600M8 8-pad lifting frameLG700M14 14-pad lifting frameLG800M8 8-pad lifting frameLG900M12 12-pad lifting frameLG920M4 4-pad lifting frameL100M4 H-style 4-pad lifting frameL50M4 H-style 4-pad lifting frameL80M8 8-pad lifting frame

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.

Contact us