Vietnam+84 332 839 268 Taiwan+886 3 451 8806 Send requestreply in 24 h

FullSharp · since 1991

Equipment › ANVER Vacuum Lifters › LBA lifting bail assemblies

ANVER LBA-Series lifting bail assemblies for vacuum lifters

LBA-Series bails are used where there is no headroom to hang the vacuum generator below the hook. A switch in the bail runs the attach and release cycle as the chain slackens.

Made in the USA
ISO 9001:2015 certified
More than 58 years of experience

Request a quote

LBA-Series lifting bail assemblies

ANVER’s LBA-Series lifting bail assemblies allow you to remotely mount the vacuum generator while using ANVER lifting frames and pad attachments.

Manufacturer PDF

The vacuum attach-and-release cycle is controlled by a switch connected to the lifting bail. When the unit is lowered onto the load and the suspension chain slackens, the full weight of the lifter is on the load, and a switch automatically starts the attachment process. Once the proper vacuum level has been achieved, a green light will illuminate, letting you know it is now safe to lift. When you are ready to put the load down, lower the unit until the chain is slack; the switch will now start the release process. Once vacuum has been released, you can raise the unit with the hoist controls and you are prepared for your next lift.

Keep in mind that most vacuum lifters have the vacuum generator below the hook, and this is always recommended. It is easier to set up and festoon, as well as being safer, as the check valve is below the hook in case a hose is damaged. The LBA-Series is used in a very small number of applications in which there is no headroom to allow a larger generator to be mounted below the hook.

LBA300-ARSL-QD1 with 8-pad attachment PA1117-S-3
LBA300-ARSL-QD1 shown above with 8-pad PA1117-S-3 (sold separately)

LBA300-BAIL lifting bail assembly

Includes:

Mounting hardware for 3″ sq. beams (9″ centers)

Specifications
Model number	LBA300-BAIL
Structural capacity [lbs (kg.)]	2200 (998)
Headroom [in (mm)]	8 (203)
Unit weight [lbs (kg.)]	11 (5)

LBA300-QD1 lifting bail assembly

Includes:

Manifold vacuum gauge for operator to monitor safe vacuum level.
Quick-disconnect for easily changing pad attachments.
Adjustable front handlebar
Mounting hardware for 3″ sq. beams (9″ centers)

Specifications
Model number	LBA300-QD1
Structural capacity [lbs (kg.)]	2200 (998)
Headroom [in (mm)]	8 (203)
Unit weight [lbs (kg.)]	20 (10)

LBA300-ARSL-QD1 lifting bail assembly

Includes:

Vacuum leakage sensor
Attach/release slide valve with safety lockout
Manifold vacuum gauge for operator to monitor safe vacuum level.
Quick-disconnect for easily changing pad attachments.
Adjustable front handlebar
Mounting hardware for 3″ sq. beams (9″ centers)

Specifications
Model number	LBA300-ARSL-QD1
Structural capacity [lbs (kg.)]	2200 (998)
Headroom [in (mm)]	8 (203)
Unit weight [lbs (kg.)]	24 (11)

Optional accessories
Product photo	Part number	Description
	32000820-L	Generator manifold assy., (2) 3/8″ NPT port for lifting frames, 3/8″ quick disconnect plug
	32000820-QD2	Generator manifold assy., (2) 3/8″ quick disconnect socket for pad attachment, 3/8″ quick disconnect plug
	32000820-L3P/6P	Generator manifold assy., (3) 3/8″ hose barb for lifting frames, 3/8″ quick disconnect plug
	22600095	Counterweight assembly for LBA series, 16 lb (7.26 kg), with mounting hardware [NOT COMPATIBLE WITH LBA300-BAIL]
	22600100	Counterweight assembly for LBA series, 27 lb (12.2 kg), with mounting hardware [NOT COMPATIBLE WITH LBA300-BAIL]