Articulating Pneumatic Jib Crane, Dual-Point Hook

Many parts can only be hooked at two points — hook one side off-center and the load tilts and swings. In narrow aisles between machines, that swinging is both dangerous and slows workers down as they try to realign it.

FullSharp installs an articulating pneumatic jib crane with a symmetrical dual-point hook set. The load hangs balanced, and the arm folds at the joint so material can be threaded through narrow gaps between equipment with ease.

Articulating Pneumatic Jib Crane with Dual-Point Hook

An articulating pneumatic jib crane carrying a dual-point hook set in the production workshop.

Equipment Installed

Articulating arm: folds at the center joint, guiding the load through narrow gaps around machines.
Pneumatic lifting unit: lifts and lowers by hand force, holding the load floating in air and stopping at any height.
Dual-point hook set: two symmetrical hooks carry the load at two points so the part doesn't tilt when lifted.
Control handle: lift/lower buttons on the handle let one person hold and control the load at the same time.

Key Specifications

Rotation angle360 degrees

Benefits for Your Facility

No tilting load

The dual-point hook keeps the part balanced throughout lifting and swinging.

Fits tight spaces

The joint lets the arm change direction between machines placed close together.

Light operation

The pneumatic unit carries the weight — the operator only guides direction.

Actual Installation Photos

Articulating Pneumatic Jib Crane with Dual-Point Hook - photo 1

Articulating Pneumatic Jib Crane with Dual-Point Hook - photo 2

Articulating Pneumatic Jib Crane with Dual-Point Hook - photo 3

Articulating Pneumatic Jib Crane with Dual-Point Hook - photo 4

Articulating Pneumatic Jib Crane with Dual-Point Hook - photo 5

Articulating Pneumatic Jib Crane with Dual-Point Hook - photo 6

Articulating Pneumatic Jib Crane with Dual-Point Hook - photo 7

Articulating Pneumatic Jib Crane with Dual-Point Hook - photo 8

Articulating Pneumatic Jib Crane with Dual-Point Hook - photo 9

Articulating Pneumatic Jib Crane with Dual-Point Hook - photo 10

Articulating Pneumatic Jib Crane with Dual-Point Hook - photo 11

Articulating Pneumatic Jib Crane with Dual-Point Hook - photo 12

Articulating Pneumatic Jib Crane with Dual-Point Hook - photo 13

Articulating Pneumatic Jib Crane with Dual-Point Hook - photo 14

Articulating Pneumatic Jib Crane with Dual-Point Hook - photo 15

Articulating Pneumatic Jib Crane with Dual-Point Hook - photo 16

Articulating Pneumatic Jib Crane with Dual-Point Hook - photo 17

Articulating Pneumatic Jib Crane with Dual-Point Hook - photo 18

Click a photo to enlarge. Album of 18 photos taken on site.

Suitable Applications

Mechanical assembly lines
Machine parts manufacturing plants
Loading/unloading areas with fixed hook points
Equipment inspection and repair stations

Consultation for Your Facility

FullSharp reviews the part's shape, hook positions, and the clearance around the station, then calculates the length of each arm segment. We build the dual-point hook to match your exact part and test-run it before handover.