Equipment › ANVER Vacuum Components › Air Powered Vacuum Pumps › JB Single-Stage Pumps › JEHCSP Vacuum Generator

ANVER JEHCSP Energy-Saver Vacuum Generator, Pneumatic Pilot

The JEHCSP Economizer series handles non-porous loads where vacuum loss is unacceptable. A fast acting check valve prevents leakage.

Vacuum Pumps and Vacuum Generators

Energy-Saver Vacuum Pumps with Pneumatic Pilot Valve
JEHCSP Economizer Series

ANVER JEHCSP energy saver vacuum generator

Equip your vacuum generator with an air supply control valve and a fast-acting vacuum switch to save energy. The JEHCSP Series uses compressed air only when required to maintain the programmed level. Whenever the vacuum level drops 5% below the preset level, the generator is reactivated. A fast acting check valve that prevents leakage is also included.

The “Economizer” series brings a new level of efficiency to the handling and holding of non-porous materials and objects. Use this system when the loss of vacuum is unacceptable. The JEHCSP is equipped with pneumatic control for explosion-proof operation. The pneumatic switch and mounting plate can be oriented in various positions for specific application needs.

Note: This system requires a separate on/off valve in the circuit to release the load.

Compressed air:50 micron, filtered, non-lubricated
Operating temp.:0 to 60°C = 32 to 140°F
Optimum operating pressure:6 bar = 85-90 psi
Mechanical life:15 million cycles
Valve material:Anodized aluminum, brass nozzle
Seals materials:Nitrile NBR
Dimension drawing, ANVER JEHCSP energy saver vacuum generator
ANVER JEHCSP energy saver vacuum generator
Part NumberNozzle
Size
D in.
(mm)
L1
in.
(mm)
L2
in.
(mm)
H
in.
(mm)
W
in.
(mm)
Item Weight
oz.
(grams)
Air
Consumption
SCFM
(l/min.)
Vacuum
Flow
SCFM
(l/min.)
Vacuum
Level
in Hg
(-mmHg)
JE12HCSP120.77
(20)
4.41
(112)
1.40
(35)
1.89
(48)
3.71
(94)
12.275
(348)
2.1
(59)
1.9
(54)
27
(686)
JE15HCSP150.77
(20)
4.80
(122)
1.40
(35)
1.89
(48)
3.71
(94)
N/A3.2
(91)
2.7
(76)
27
(686)
JE20HCSP201.25
(32)
4.22
(107)
2.97
(75)
1.93
(49)
3.71
(94)
N/A6.1
(170)
4.5
(127)
27
(686)
JE25HCSP251.25
(32)
4.22
(107)
2.97
(75)
1.93
(49)
3.71
(94)
N/A9.2
(260)
7.1
(201)
27
(686)
JE
JE Series
12
Nozzle Size

12
15
20
25

H
Vacuum Level

H = 90% (Standard)

CS
Control Valve

Supply and Check Valve
P
Pilot

P = Pneumatic

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.

Contact us