Equipment › ANVER Vacuum Components › Air Powered Vacuum Pumps › JB Single-Stage Pumps › JBC Vacuum Generator

ANVER JBC Series Air Powered Vacuum Pump with Supply Valve

The JBC series is a compact air powered vacuum generator with Supply Valve, with all air passages internal. Specifications, dimensions and ordering codes follow.

Vacuum Pumps and Vacuum Generators

Air Powered Vacuum Pumps with Supply Control Valve
JBC Series

ANVER JBC vacuum generator

The addition of a control valve for the air supply transforms the basic JB series vacuum generator into a compact vacuum system with built-in vacuum control. The control valve is mounted directly to the vacuum generator body, and all air passages are internal to the system.

This vacuum generator is recommended for use where compact size and precise control are important. Pneumatic control is available for explosion-proof operation as well as additional voltages.

Available Options:

Specifications:

Dimension drawing, ANVER JBC vacuum generator
Compressed air:50 micron, filtered, non-lubricated
Operating temp.:32° to 140°F (0° to 60°C)
Optimum operating pressure:5 bar = 72.5 psi
Mechanical life:15 million cycles
Operating frequency:2 Hz max.
Operating mode:N. C. – normally closed
N. O. – 24 V DC on request
Valve material:Anodized aluminum, brass nozzle
Seals material:Nitrile NBR

Dimension drawing, ANVER JBC vacuum generator

Dimensional Specifications:

Nozzle
Size
D
in.
(mm)
L1
in.
(mm)
L2
in.
(mm)
Air Consumption
SCFM
(l/min.)
Vacuum Flow
SCFM
(l/min.)
Vacuum Level
in Hg
(-mmHg)
120.76
(19)
4.37
(111.0)
1.37
(35)
2.10
(59)
1.90
(54)
27
(690)
150.76
(19)
4.98
(121.5)
1.37
(35)
3.20
(91)
2.65
(75)
27
(690)
200.95
(24)
5.80
(147.3)
1.83
(47)
6.10
(170)
4.50
(130)
27
(690)
250.95
(24)
6.37
(162.0)
1.83
(47)
9.20
(260)
7.06
(200)
27
(690)
301.34
(34)
7.52
(191.0)
3.81
(97)
14.0
(400)
9.50
(270)
27
(690)
JB
JB Series
12
Nozzle Size

12
15
20
25
30
H
Vacuum Level

H = 90% (Standard)
C
Control Valve

Supply Only

Not available in size 30

E
Pilot

E = 24V DC
P = Pneumatic
Z = 110V 60Hz
G
Accessories

D = Digital Switch
G = Vacuum Gauge
L = Electronic Switch
M = Electro-Mechanical Switch
N = Pneumatic Switch

ANVER JBC vacuum generator

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.

Contact us