Equipment › ANVER Vacuum Components › Air Powered Vacuum Pumps › JB Single-Stage Pumps › JEDS-P Vacuum Generator

ANVER JEDS-P Energy Saver Vacuum Generator, Pneumatic Pilot

JEDS-P replaces conventional vacuum generating stations in automation. Specifications, dimensions and ordering codes are below.

Vacuum Pumps and Vacuum Generators

Energy Saver Vacuum Pumps With Pneumatic Pilot Valve
JEDS-P Series

ANVER JEDS-P energy saver vacuum generator

The JEDS-P Series Energy Saver Vacuum Generator features programmable vacuum level and blow-off, adjustable flow volume, and vacuum loss prevention. Compressed air is used only when required to maintain the vacuum. Standard check valves are built in.

The JEDS-P system can be used in automation applications to replace conventional vacuum generating stations. This is a dependable and energy efficient system. The JECS-P is equipped with a pneumatic control for explosion-proof applications.

Specifications for JEDS-P Series Vacuum Pumps:

Dimension drawing, ANVER JEDS-P energy saver vacuum generator
Compressed air:50 micron, filtered, non-lubricated
Operating temperature:0 to 60°C (32 to 140°F)
Optimum operating pressure:5 bar (72.5 psi)
Mechanical life:15 million cycles
Valve material:Anodized aluminum, brass nozzle
Seal material:Nitrile NBR

Dimensional Specifications for JEDS-P Series Vacuum Pumps:

Dimension drawing, ANVER JEDS-P energy saver vacuum generator
Nozzle
Size
L1
in.
(mm)
L2
in.
(mm)
Air Consumption
SCFM
(l/min.)
Vacuum Flow
SCFM
(l/min.)
Vacuum Level
in Hg
(-mmHg)
124.37
(111.0)
1.37
(35)
2.10
(59)
1.90
(54)
27
(690)
154.78
(121.5)
1.37
(35)
3.20
(91)
2.65
(75)
27
(690)
205.80
(147.3)
1.83
(47)
6.10
(170)
4.50
(130)
27
(690)
256.37
(162.0)
1.83
(47)
9.20
(260)
7.06
(200)
27
(690)
307.52
(191.0)
3.81
(97)
14.0
(400)
9.50
(270)
27
(690)
Ordering Information for JEDS-P Series Vacuum Generators:
JE
JE Series

12
Nozzle Size

12
15
20
25
30

H
Vacuum Level

H = 90% (Standard)

DS
Dual Control Valves and Check Valves

Not available in size 30

P
Pilot

P = Pneumatic

Example: Model JE12HDS-P is a JE Series Vacuum Generator with Nozzle Size 12, Standard Vacuum Level (H), Dual Control Valves (DS), and Pneumatic Pilot (P)

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.

Contact us