Small Workshop Lifting, 500 kg Adjustable Gantry

FullSharp supplies a 500 kg gantry crane with adjustable height for small workshops and garages that cannot hang a rail or set fixed columns, yet lift several hundred kilograms every day. The freestanding frame rolls on four casters, is pushed where needed and locked, and works as soon as a hoist is hung on the beam.

Small workshops often lack a structure strong enough to hang a rail from, and there's no room to erect fixed columns either. Loads weighing several hundred kilograms still need lifting every day, and hiring a mobile crane for each job is both slow and costly.

FullSharp supplies a 500 kg gantry crane with adjustable height for each work position. The freestanding frame rolls on four casters, so it can be pushed to where it's needed, locked in place, and used as soon as a hoist is hung on the beam.

500 kg Gantry Crane with Adjustable Height

500 kg gantry crane on casters with height-adjustable legs, matched to each work position.

Equipment installed

500 kg-rated beam: carries the trolley and hoist, traveling along the beam to reach loads at several points.
Height-adjustable legs: extend or retract notch by notch with locking pins, lowered to pass through doorways and raised for taller lifts.
Lockable heavy-duty casters: pushed by hand to a new position, then locked so the frame stays steady under load.
Frame bracing set: diagonal braces keep the gantry from swaying while a load hangs on the beam.

Key specifications

Load capacity500 kg
HeightAdjustable
Mobility typePush-type casters

Benefits for the plant

No fixed installation needed

No foundation, no ceiling drilling, so it works even in a rented workshop.

Height fits the job

Lower the legs to pass through doorways, raise them for taller lifting needs.

Brought straight to the load

Push the gantry to where the load is instead of carrying the load to a fixed crane.

Real installation photos

500 kg Gantry Crane with Adjustable Height - photo 1

500 kg Gantry Crane with Adjustable Height - photo 2

500 kg Gantry Crane with Adjustable Height - photo 3

500 kg Gantry Crane with Adjustable Height - photo 4

500 kg Gantry Crane with Adjustable Height - photo 5

500 kg Gantry Crane with Adjustable Height - photo 6

500 kg Gantry Crane with Adjustable Height - photo 7

500 kg Gantry Crane with Adjustable Height - photo 8

500 kg Gantry Crane with Adjustable Height - photo 9

500 kg Gantry Crane with Adjustable Height - photo 10

500 kg Gantry Crane with Adjustable Height - photo 11

500 kg Gantry Crane with Adjustable Height - photo 12

500 kg Gantry Crane with Adjustable Height - photo 13

500 kg Gantry Crane with Adjustable Height - photo 14

500 kg Gantry Crane with Adjustable Height - photo 15

500 kg Gantry Crane with Adjustable Height - photo 16

500 kg Gantry Crane with Adjustable Height - photo 17

Click a photo to enlarge. Album of 17 photos taken on site.

Suitable applications

Small workshops and repair garages
Engine and gearbox disassembly areas
Outdoor loading and unloading yards
Mobile equipment installation sites

Frequently asked questions

What lifting equipment suits a small workshop?

A mobile gantry crane is a good choice when there is no structure to hang a rail and no room for fixed columns. It stands on its own and moves where needed.

Why is adjustable height useful?

The beam height can be set for each work position, so the gantry fits under low areas and still lifts high enough elsewhere.

What hoist is used with the gantry?

A hoist rated for the load is hung on the beam. FullSharp recommends a manual or electric hoist based on how often the workshop lifts.

Similar projects

Get a consultation for your plant

FullSharp asks for your heaviest load, the required lifting height and aisle width to finalize the gantry span and leg adjustment range. We deliver, assemble on site and provide guidance for moving it safely.

500 kg height-adjustable gantry crane on casters for small workshops and garages