VN EN TW
FullSharp
Vietnam+84 332 839 268Taiwan+886 3 451 8806Send requestreply in 24 h
About
Equipment
What do you need to lift
Completed projects
Catalogue
Contact
VNENTW
FullSharp · since 1991

Equipment › ANVER vacuum lifters › 90° Powered Tilters › Eight pad 90° tilter, adj. arms, 250 lb

ANVER ETL/ATL25M8-4/44 eight pad vacuum tilter, 90° powered tilt

The lightweight ETL/ATL25M8-4/44 series are eight pad vacuum lifters with adjustable crossarms and 90° powered tilt, in electric (E) and air powered (A) versions, rated 250 lb (113 kg). Dimension drawings and specifications for each model are below.

Request a quote

Eight pad vacuum lifters with adjustable crossarms & powered 90° tilt
For standard eight pad lifters with adjustable crossarms & powered 90° tilt – capacity up to 250 lb (113 kg)
Manufacturer PDF

ANVER ETL25M8-60-4/44 vacuum tilter
ANVER ETL25M8-60-4/44 vacuum tilterANVER ETL25M8-96-4/44 vacuum tilterANVER ETL25M8-84-4/44 vacuum tilterANVER ATL25M8-96-4/44 vacuum tilter

ANVER vacuum tilters and upenders are loaded with safety features and have come to set the standard for safe tilting of loads. Each version has been revised over the years to perform better and last longer. The pads, vacuum generators, frame, controls, hardware, filters, safety features, handlebars, etc. are all new and improved. Every aspect of the lifters has been redesigned and the latest represent the best tilters available.

The lightweight electric-powered and air-powered vacuum lifters/tilters are designed to significantly reduce the effort of upending heavy loads while providing powerful suction force and 90 degree tilt capability. Built with safety in mind, these lifters/tilters are loaded with protective features including: a VLS system, 9V battery powered vacuum leakage sensor and warning system; an attach/release slide valve with safety lock; and locking knobs on the adjustable vacuum pad, slide assemblies, and crossarms (when applicable). The ETL and ATL series lifters/tilters are capacity rated at a maximum vacuum level of 24 in. Hg (609.6 mm Hg) with a 4:1 safety factor on vacuum holding (unless otherwise specified).

The dual filter/reservoir assembly, equipped on both electric-powered and air-powered vacuum upenders, offers a clean and reliable vacuum hold in less than ideal environments. Constructed with an ergonomic lifter handlebar, a welded steel lifting frame, and end of beam positioning handles, operators can use this equipment with ease and comfort for a wide range of loads and applications.

*Load weight and depth affect the final angle that the lifter achieves. Consult ANVER for loads thicker than 2 in. (51mm) due to center of gravity offset.

Note: The unit weight does not include optional accessories.
Parking stands are not compatible with ETL/ATL series tilters.

Standard air powered rubber seal tilters specifications

ATL25M8 dimension drawing
Air powered lifter modelATL25M8-60-4/44ATL25M8-84-4/44ATL25M8-96-4/44
Rated load capacity [lbs (kg.)]250 (113)250 (113)250 (113)
Unit weight [lbs (kg.)]175 (79)180 (82)185 (84)
Power required [psi]90-12090-12090-120
Air consumption [SCFM (l/min.)]*10.5 (297.3)*10.5 (297.3)*10.5 (297.3)
Tilt speedVariable
(100% duty cycle)		Variable
(100% duty cycle)		Variable
(100% duty cycle)
A Pad distances max. [in. (mm)]63 (160087 (2210)99 (2515)
A Pad distances min. [in. (mm)]43 (1092)43 (1092)43 (1092)
B Beam length [in. (mm)]60 (1524)84 (2134)96 (2438)
C Pad distances max. [in. (mm)]48 (1219)72 (1829)84 (2134)
C Pad distances min. [in. (mm)]31 (787)31 (787)31 (787)
D Crossarm length [in. (mm)]44 (1118)44 (1118)44 (1118)
E Pad distances max. [in. (mm)]47 (1194)47 (1194)47 (1194)
E Pad distances min. [in. (mm)]16 (406)16 (406)16 (406)
F Pad dimension [in. (mm)]6.0 (153)6.0 (153)6.0 (153)
G Handlebar length [in. (mm)]33 (838)33 (838)33 (838)
H Pad distance from bail [in. (mm)]5 (127)5 (127)5 (127)
J Pad distance from frame [in. (mm)]3 (76)3 (76)3 (76)
K Maximum vertical headroom [in. (mm)]55 (1397)55 (1397)55 (1397)
L Maximum horizontal headroom [in. (mm)]36 (914)36 (914)36 (914)
M Pad distance from handlebar [in. (mm)]13 (330)13 (330)13 (330)
Maximum plate dimensions [ft. (m)]6 x 6 (1.8 x 1.8)8 x 6 (2.4 x 1.8)10 x 6 (3.0 x 1.8)
Pad numberVP62VP62VP62

*Air consumption is “0” on a non-porous material once the vacuum level is reached at peak value

Standard electric powered rubber seal tilters specifications

ETL25M8 dimension drawing
Electric powered lifter modelETL25M8-60-4/44ETL25M8-84-4/44ETL25M8-96-4/44
Rated load capacity [lbs (kg.)]250 (113)250 (113)250 (113)
Unit weight [lbs (kg.)]195 (88)200 (91)205 (93)
Power required115V/60Hz/1Ph/11A115V/60Hz/1Ph/11A115V/60Hz/1Ph/11A
Tilt speed [sec.]8
(**25% duty cycle)		8
(**25% duty cycle)		8
(**25% duty cycle)
Tilt cycles per hour565656
A Pad distances max. [in. (mm)]63 (160087 (2210)99 (2515)
A Pad distances min. [in. (mm)]43 (1092)43 (1092)43 (1092)
B Beam length [in. (mm)]60 (1524)84 (2134)96 (2438)
C Pad distances max. [in. (mm)]48 (1219)72 (1829)84 (2134)
C Pad distances min. [in. (mm)]29 (737)29 (737)29 (737)
D Crossarm length [in. (mm)]44 (1118)44 (1118)44 (1118)
E Pad distances max. [in. (mm)]47 (1194)47 (1194)47 (1194)
E Pad distances min. [in. (mm)]16 (406)16 (406)16 (406)
F Pad dimension [in. (mm)]6.00 (153)6.00 (153)6.00 (153)
G Handlebar length [in. (mm)]33 (838)33 (838)33 (838)
H Pad distance from bail [in. (mm)]5 (127)5 (127)5 (127)
J Pad distance from frame [in. (mm)]3 (76)3 (76)3 (76)
K Maximum vertical headroom [in. (mm)]55 (1397)55 (1397)55 (1397)
L Maximum horizontal headroom [in. (mm)]36 (914)36 (914)36 (914)
M Pad distance from handlebar [in. (mm)]13 (330)13 (330)13 (330)
Maximum plate dimensions [ft. (m)]6 x 6 (1.8 x 1.8)8 x 6 (2.4 x 1.8)10 x 6 (3.0 x 1.8)
Pad numberVP62VP62VP62

**Example of “25% duty cycle”: 25 seconds continuous, 75 seconds rest.

13600016

Related pages

Four pad 90° tilter, adj. arms, 2000 lbEight pad 90° tilter, adj. arms, 2000 lbFour pad 90° tilter, 2000 lbSingle pad 90° tilter, 225 lbTwo pad 90° tilter, 250 lbFour pad 90° tilter, adj. arms, 250 lbSingle pad 90° tilter, 250 lbSingle pad 90° tilter, 275 lbFour pad 90° tilter, adj. arms, 500 lbEight pad 90° tilter, adj. arms, 500 lbTwo pad 90° tilter, 500 lbSingle pad 90° tilter, 500 lb

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.

Contact us