Vietnam+84 332 839 268 Taiwan+886 3 451 8806 Send requestreply in 24 h

VN EN TW

FullSharp · since 1991

Enclosed rail hose management

Name: Enclosed rail hose management
Brand: FullSharp

Overview

Knight Global hose management kits include everything needed to run the compressed air supply along enclosed rail quickly and neatly. Kits are available for straight or coiled hose, on runways or bridges.

Knight Global’s Hose Management provides everything you will need to quickly and efficiently run your pneumatic supply system. Knight offers kits for straight or coiled hose system requirements, as well as kits for runways or bridges.

For more information on Knight Hose Management or if you need help in selecting the proper kit for your system; contact a Knight representative.

Features and Benefits

Features

Attaches to RAD4110, RAD6110 and RAD7510 Series Rail.
Coiled and Straight Configurations for either Runways or Bridges.
Supplies Air to Pneumatic Balancers, Tractors, Tooling and End Effectors.
Festoon Kit includes:
- Brackets, Fittings and Messenger Cable for (1) one Runway OR (1) one Bridge.
Hose Fitting Diameters: 1/2 in. [12.7mm].

Notes

Kits do not include the Coiled / Straight Hose or Regulator.
The hoses and regulator can be purchased separately.
(1) Hose trolley is used for every 5 ft. [1.5m] of rail length (Straight Hose Only).
Bridge Transition Bracket is provided to ensure the first (2) two coils do not drag on the messenger cable.

Accessories

Hangers 1

TRH2020Side by Side Hanger

Weight: 5.6 lbs. [2.53kg]

Details

Knight Global's TRH2020 Side by Side Hanger suspends the TR2000 Series Rail by mounting to Knight's RAD4110, RAD6110, and RAD7510 Series Rail. The hanger allows for the TR2000 rail to run parallel to an existing Knight Rail System. The TRH2020 Hanger is coated with an environmentally friendly corrosion protectant.

Mounts to RAD4110, RAD6110 and RAD7510 Series Rail.
Suspends Knight TR2000 Series Rail.
Coated with an environmentally friendly corrosion protection. ** (Autophoretic ACC 900®).

CAD drawing

Hose Management 5

Straight Hose Management for Runways MRMS4310

MRMS4310Straight Hose Management for Runways

Details

The MRMS4310 hose management kit for straight hoses on a runway will attach straight hose to Knight's RAD4110, RAD6110 and RAD7510 Series Rail. It supplies air to Pneumatic Balancers, Tractors, Tooling or End Effectors. The kit includes: all brackets, fittings and messenger cable for (1) one runway. Straight hose and regulator can be purchased separately.

Supplies Air to Pneumatic Balancers, Tractors, Tooling and End Effectors.
Festoon Kit includes: – Brackets, Fittings and Messenger Cable for (1) one Runway.
Hose Fitting Diameters: 1/2 in. [12.7mm].
Kit does not include the Straight Hose or Regulator.
The Hose and Regulator can be purchased separately.

CAD drawing

Coiled Hose Management for Bridges MRMS4309

MRMS4309Coiled Hose Management for Bridges

Details

The MRMS4309 hose management kit for coiled hoses on a bridge will attach coiled hose to Knight's RAD4110, RAD6110 and RAD7510 Series Rail. It supplies air to Pneumatic Balancers, Tractors, Tooling or End Effectors. The kit includes: all brackets, fittings and messenger cable for (1) one bridge. Coiled hose and regulator can be purchased separately.

Supplies Air to Pneumatic Balancers, Tractors, Tooling and End Effectors.
Festoon Kit includes: – Brackets, Fittings and Messenger Cable for (1) one Bridge.
Hose Fitting Diameters: 1/2 in. [12.7mm].
Kit does not include the Coiled Hose or Regulator.
The Hose and Regulator can be purchased separately.

CAD drawing

Cable Saddle with Velcro Straps MRMA4301

MRMA4301Cable Saddle with Velcro Straps

Weight: 1.04 lbs. [0.47kg].

Details

The MRMA4301 Cable Saddle with Velcro Straps supports the electric or pneumatic festooning for the overhead rail systems. The velcro straps allow for fast and easy installation of the electrical cables or pneumatic hoses.

Steel Construction.
Pivoting Joint.
Supports up to: 2 in. [51mm] Electric Cable or Pneumatic Hose.
Velcro Straps for Fast and Easy Installation.
Pivoting Design allows for minimal stack-up lengths.

CAD drawing

Filter/Regulator Bracket Assembly MRMA4488

MRMA4488Filter/Regulator Bracket Assembly

Weight: 3.2 lbs. [1.45kg].

Details

Attaches to Knight's RAD4110, RAD6110, and RAD7510 Aluminum Series Rail Systems. Knight's MRMA4488 Filter/ Regulator Bracket Assembly controls the air flow to the workstation crane system.

NPT Filter and Regulator: 1/2 in. [12.7mm].
Pressure Gauge, Hose and Fittings.
Controls air flow to the workstation crane.
Can be used in Knight Aluminum Hose Management kits.

CAD drawing

MRMA4304Fixed End Cable Saddle

Weight: 1.5 lbs. [0.70kg]

Details

The MRMA4304 is a fixed hose management cable saddle. It supports the electric or pneumatic festooning for the overhead rail systems. The Fixed End Cable Saddle can be used with Knight's RAD7510, RAD6110 and RAD4110 Series Rail. The MRMA4304 does not allow for any pivoting of the saddle. The Velcro straps allow for fast and easy installation of hoses.

Used with RAD7510, 6110 or 4110 Series rail.
Steel Construction.
Fixed design.
Supports up to: 2 in. [51mm] Electric Cable or Pneumatic Hose.
Velcro Straps for Fast and Easy Installation.

CAD drawing

Hose Trolleys 6

MRMA4814Hose Trolley

Max capacity: 50 lbs. [22kg]
Weight: 3.2 lbs. [1.45kg]

Details

Knight Global's MRMA4814 Hose Trolley carries festooning on Knight's RAD7510 Series Overhead Aluminum Rail Systems. When using Knight's MRMA4814 Hose Trolley alternate the "U" bolts from inside to outside when installing the festoon hose, this will allow for minimal stack-up lengths. Knight Hose Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

Carries festooned hose used in hose management kits.
Fiberglass filled High Impact Nylon Wheels.
Side Guide Rollers with integrated bearings.
Double-Shielded bearings keep dirt out, and do not require lubrication.
Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F.

CAD drawing

MRMA6114Hose Trolley

Weight: 3.1 lbs. [1.41kg].

Details

Carries festooning for Knight's RAD6110 Series Overhead Aluminum Rail Systems. When using Knight's MRMA6114 Hose Trolley alternate the "U" bolts from inside to outside when installing the festoon hose, this will allow for minimal stack-up lengths.

Carries festooned hose used in hose management kits.
Fiberglass filled High Impact Nylon Wheels.
Side Guide Rollers with integrated bearings.
Double-Shielded bearings keep dirt out, and do not require lubrication.
Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F.

CAD drawing

MRMA4019Hose Trolley

Max capacity: 50 lbs. [22kg]
Weight: 2.8 lbs. [1.27kg]

Details

Knight Global's MRMA4019 Hose Trolley carries festooning on Knight's RAD4110 Series Overhead Aluminum Rail Systems. When using Knight's MRMA4019 Hose Trolley alternate the "U" bolts from inside to outside when installing the festoon hose, this will allow for minimal stack-up lengths. Knight Hose Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

Carries festooned hose used in hose management kits.
Fiberglass filled High Impact Nylon Wheels.
Side Guide Rollers with integrated bearings.
Double-Shielded bearings keep dirt out, and do not require lubrication.
Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F.

CAD drawing

MRMA6115Hose Trolley with Cable Saddle

Max capacity: 50 lbs. [22kg].
Weight: 4.6 lbs. [2.09kg].

Details

The MRMA6115 Hose Trolley with Cable Saddle supports the electrical festooning for Knight's RAD6110 Series Overhead Aluminum Rail Systems. The Cable Saddle has velcro straps that allow for fast and easy installation of electrical cables. It can support up to 2 in. [51mm] cables or hoses.

Alternate the "U" bolts from inside to outside when installing festoon hose. This will allow for minimal stack-up lengths.

Travels inside RAD6110 Series Rail.
Velcro Straps.
Supports Cable and Festooning.
Fiberglass filled High Impact Nylon Wheels.
Side Guide Rollers with integrated bearings.
Double-Shielded bearings keep dirt out, and do not require lubrication.
Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F.

CAD drawing

MRMA4215Hose Trolley with Cable Saddle

Max capacity: 50 lbs. [22kg]
Weight: 4.2 lbs. [1.91kg]

Details

Knight Global's MRMA4215 Hose Trolley with Cable Saddle supports the electrical festooning for Knight's RAD4110 Series Aluminum Rail Systems. It has velcro straps that allow for fast and easy installation of electrical cables. The MRMA4215 can support up to 2 in. [51mm] cables or hoses. Knight Hose Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

Velcro Straps.
Fiberglass filled High Impact Nylon Wheels.
Supports Cable and Festooning.
Side Guide Rollers with integrated bearings.
Double-Shielded bearings keep dirt out, and do not require lubrication.
Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F.

CAD drawing

MRMA4494Messenger Cable Hose Trolley

Weight: 2.3 lbs. [1.04kg].

Details

Carries festooning or cable for Knight's RAD4110, RAD6110, and RAD7510 Series Overhead Aluminum Rail Systems. Knight's MRMA4494 travels on a tag line on the side of the rail system and uses the complete length of the rail, which results in zero stack-up lengths. Alternate the "U" bolts from inside to outside when installing festoon hose. This will allow for minimal stack-up lengths.

Travels on tag line on the side of the RAD4100, RAD4110, RAD6110, RAD7500, and RAD7510 Series Rails.
Zero stack-up lengths.
Carries festooned hose or cable used in hose management kits.
Fiberglass filled High Impact Nylon Wheels.
Double-Shielded bearings keep dirt out, and do not require lubrication.
Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F.

CAD drawing