Vietnam+84 332 839 268 Taiwan+886 3 451 8806 Send requestreply in 24 h

FullSharp · since 1991

Equipment › ANVER vacuum lifters › EZ-Tilt vacuum lifters › VPF-57-AIR vacuum generator

ANVER VPF-57-AIR air powered vacuum generator, up to 4400 lb

The VPF-57-AIR generates vacuum from shop compressed air, mounts on a lifting beam and works with a wide range of pad attachments. Features, specifications for three models and dimensions below.

Request a quote

Compressed air powered vacuum generators
Self-contained air powered vacuum stations
VPF-57-AIR series
Manufacturer PDF

ANVER VPF-57-AIR air powered vacuum generator

ANVER’s latest models of vacuum generators feature high capacity pumps, valves, filters and gauges for trouble-free operation in the most demanding production environments. Designed for use with a wide assortment of vacuum lifter assemblies and interchangeable pad attachments, these high quality Vac-Packs are ruggedly built, yet affordably priced for unmatched value. The VPF-57-AIR series features a sturdy welded frame construction for heavy weight load lifting capability.

ANVER Air Saver tag

VLS safety system included

Features:

Air powered vacuum generator
No electric power required, operates using dry, clean compressed air for vacuum generation. The vacuum generator is a single stage unit with no moving parts or rubber gaskets to maintain or replace.
Takes standard dry, clean shop air
Input pressure to be regulated to 90 psi (72.5 psi on VPF-57/30-AIR). Provided with 3/8” NPT inlet.
Energy Air Saver vacuum generator:
The vacuum controlled valve shuts off the flow of compressed air to the pump when the pre-set level is reached, and consequently the consumption of compressed air is minimized. (Not available on VPF-57/30-AIR)
Vacuum leakage sensor and warning system
The VLS is a battery powered unit consisting of solid state circuitry with microprocessor, pressure sensor, LCD digital display in inches of Hg, and audible and visual warning signs (horn and red light). The system is plumbed to the Vac-Pack and monitors vacuum level, triggering the alarm in the event of a leakage in vacuum level.
Front mounted gauges
Includes both input air pressure and vacuum indicator gauges, front mounted for continuous monitoring by the operator. Also included is a filter view port to monitor the filter for cleaning.
Ergonomic adjustable front handlebar
Easy to grasp, large loop handlebar enables the operator to easily and safely maneuver the attached load without touching the load itself. Handlebar can be adjusted for smaller loads.
Slide control valve with push-button safety lock
The slide valve assembly allows vacuum attach and release and is mounted to the front handlebar for convenient access by the operator. The push-button safety lock keeps the slide valve in the attach position while lifting a load to prevent accidental load release.
Vacuum check valve and reservoir
A check valve and a vacuum reservoir help to maintain vacuum if the supply of compressed air is interrupted, for safe handling of non-porous loads.

Maintenance:

Air filter
High capacity air filter provides protection against pump damage. It is mounted behind the front cover which has a view port for routine inspection.

General:

Frame construction
The VPF-57-AIR series has a fully welded frame with a vacuum reservoir, a lifting bail and beam mounting hardware.
• Standard for 3”x3” beam [9” hardware centers] with a structural lifting capacity rating up to 2,200 lbs (998 kg).
• Heavy duty for 3”x6” beam [9” hardware centers] with a structural lifting capacity rating up to 4,400 lbs (1,996 kg).
Versatility
For larger load lifting capability or alternate power requirements, ANVER offers electric powered and self-powered mechanical vacuum generators, all with standard mounting designs for interchangeability.

Specifications:

Generator model number	VPF-57/20-AIR	VPF-57/25-AIR	VPF-57/30-AIR
Rated load capacity (3x3 beams) [lbs (kg.)]	2200 (998)	2200 (998)	2200 (998)
Rated load capacity (3x6 beams) [lbs (kg.)]	4400 (1996)	4400 (1996)	4400 (1996)
Unit weight (3x3 beams) [lbs (kg.)]	56 (25)	56 (25)	56 (25)
Unit weight (3x6 beams) [lbs (kg.)]	60 (27)	60 (27)	60 (27)
A Max. headroom (3x3 beams) [in. (mm)]	18 (457)	18 (457)	18 (457)
A Max. headroom (3x6 beams) [in. (mm)]	20 (508)	20 (508)	20 (508)
B Handlebar height (3x3 beams) [in. (mm)]	8 (203)	8 (203)	8 (203)
B Handlebar height (3x6 beams) [in. (mm)]	10 (254)	10 (254)	10 (254)
C Handlebar width [in. (mm)]	18 (457)	18 (457)	18 (457)
D Handlebar length [in. (mm)]	34 (864)	34 (864)	34 (864)
E Hardware centers [in. (mm)]	9 (229)	9 (229)	9 (229)
**Vacuum flow [SCFM]	4.5	7.06	9.5
Air consumption [SCFM]	6.1	9.2	14
Application	Smooth, non-porous	Rough, semi-porous	Rough, semi-porous
Energy saver / quiet automatic shut-off	Yes	Yes	No

* Note: Optimum pressure is 90 psi (72.5 psi on VPF-57/30-AIR). Air supply flow (CFM) may adversely affect required pressure (psi) to achieve optimum vacuum level. Vacuum level is 24″ Hg at sea level. Due to Energy Saver technology, air consumption is “0” on a non-porous material once the vacuum level is reached at peak value. Energy Saver not included with VPF-57/30-AIR.

**Note: High flow version available.

Selecting the right vacuum lifter

Vacuum pad attachments

13600009

FPA rectangle foam pad attachments FPA round foam pad attachments SSR and DP seal pad attachments VPF-57-DCP vacuum generator VPF-57-AC vacuum generator VPFL4-AC vacuum generator VPFL4-AIR vacuum generator

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.

ANVER VPF-57-AIR air powered vacuum generator, up to 4400 lb

Related pages

Need an ANVER system for your load?