Vietnam+84 332 839 268 Taiwan+886 3 451 8806 Send requestreply in 24 h

FullSharp · since 1991

Equipment › ANVER vacuum lifters › EZ-Tilt vacuum lifters › SSR and DP seal pad attachments

ANVER pad attachments with SSR slip-on and DP bolt-on seals

Interchangeable pad attachments for ANVER vacuum lifters with hand-replaceable SSR slip-on sealing rings or bolted DP rubber seals. Part numbers, capacity by vacuum generator and dimensions below.

Request a quote

Vacuum lifting pad attachments

Featuring vacuum pads with slip-on & bolt-on seals

ANVER PA146-S-3 pad attachment with slip-on seal

ANVER vacuum lifters can be outfitted with a variety of interchangeable vacuum pads and vacuum lifting attachments for a wide range of material handling applications. The vacuum lifting pad attachments below feature ANVER’s proprietary SSR series of hand-replaceable slip-on vacuum sealing rings. With SSR sealing rings, ANVER vacuum lifters are more economical to operate as the vacuum seals can easily be replaced in minutes with no tools required for removal or installation. ANVER SSR sealing rings also feature a short lip design for rapid vacuum attachment and release.

Note: any pad attachments used with EZ-Tilt (series) attachments must be derated by 50%.

Single pad vacuum lifting attachments with slip-on seals

Manufacturer PDF


Product photo	Vacuum lifting attachment no.	Replacement vacuum seal no.	Rated load capacity			Unit weight	A Pad diameter (flared)	B Pad attachment headroom	C Beam length	D Hardware mounting centers
Product photo	Vacuum lifting attachment no.	Replacement vacuum seal no.	w/ M100M	w/ VPFL4	w/ VPF57	Unit weight	A Pad diameter (flared)	B Pad attachment headroom	C Beam length	D Hardware mounting centers
	PA66-S-3	SSR-66	N/A	110 lbs 50 kg	110 lbs 50 kg	7 lbs 3 kg	6.63 in. 168 mm	3.3 in. 84 mm	12 in. 305 mm	9 in. 229 mm
	PA72-S-3	SSR-72	160 lbs 73 kg	160 lbs 73 kg	160 lbs 73 kg	8 lbs 4 kg	7.0 in. 178 mm	3.25 in. 83 mm	12 in. 305 mm	9 in. 229 mm
	PA76-S-3	SSR-76	160 lbs 73 kg	160 lbs 73 kg	160 lbs 73 kg	8 lbs 4 kg	7.8 in. 198 mm	3.5 in. 89 mm	12 in. 305 mm	9 in. 229 mm
	PA82-S-3	SSR-82	220 lbs 100 kg	220 lbs 100 kg	220 lbs 100 kg	8 lbs 4 kg	8.0 in. 203 mm	3.0 in. 76 mm	12 in. 305 mm	9 in. 229 mm
	PA86-S-3	SSR-86	220 lbs 100 kg	220 lbs 100 kg	220 lbs 100 kg	8 lbs 4 kg	8.8 in. 224 mm	3.0 in. 76 mm	12 in. 305 mm	9 in. 229 mm
	PA92-S-3	SSR-92	275 lbs 125 kg	275 lbs 125 kg	275 lbs 125 kg	14 lbs 6 kg	9.13 (232)	4.0 in. 102 mm	11 in. 279 mm	9 in. 229 mm
	PA96-S-3	SSR-96	275 lbs 125 kg	275 lbs 125 kg	275 lbs 125 kg	14 lbs 6 kg	10.0 in. 254 mm	4.0 in. 102 mm	11 in. 279 mm	9 in. 229 mm
	PA122-S-3	SSR-122	500 lbs 227 kg	500 lbs 227 kg	500 lbs 227 kg	18 lbs 8 kg	12 in. 305 mm	3.5 in. 89 mm	11.5 in. 292 mm	9 in. 229 mm
	PA126-S-3	SSR-126	500 lbs 227 kg	500 lbs 227 kg	500 lbs 227 kg	18 lbs 8 kg	12.6 in. 320 mm	3.5 in. 89 mm	11.5 in. 292 mm	9 in. 229 mm
	PA146-S-3	SSR-146	750 lbs 340 kg	750 lbs 340 kg	750 lbs 340 kg	22 lbs 10 kg	15 in. 381 mm	3.5 in. 89 mm	11.5 in. 292 mm	9 in. 229 mm

13600088C

Single pad vacuum lifting attachments with bolt-on seals

Manufacturer PDF

ANVER pad attachment featuring a vacuum pad with DP bolt-on seal

The DP series of vacuum pad attachments are suitable for handling heavy, rigid to semi-rigid loads. They feature rugged deep-lipped rubber sealing rings that are bolted on between two metal plates to handle heavier loads with security.

Note: not for use on thin materials.

Bolt-on seal pad attachment dimension drawing

Product photo

Pad attachment no.

Replacement vacuum seal no.

Rated load capacity

Unit weight

A Pad diameter (flared)

B Pad attachment headroom

C Beam length

D Hardware mounting centers

w/ M150M

w/ VPFL4,
VPF57
or VPE1-FD

w/ VPF-57HD
or VPE1-HD

w/ VPE3

PA145-S-3

SR-145M

750 lbs
340 kg

N/A

46 lbs
21 kg

14.5 in.
368 mm

4 in.
102 mm

11.5 in.
292 mm

9 in.
229 mm

PA155-S-3

SR-155M

1000 lbs
454 kg

N/A

50 lbs
23 kg

17.25 in.
438 mm

6 in.
152 mm

12.25 in.
311 mm

9 in.
229 mm

PA185-S-3

SR-185M

1300 lbs
590 kg

N/A

62 lbs
28 kg

18.5 in.
470 mm

4.5 in.
114 mm

12.5 in.
318 mm

9 in.
229 mm

PA195-S-3

SR-195M

1550 lbs
703 kg

N/A

68 lbs
31 kg

19.5 in.
495 mm

4.5 in.
114 mm

12.5 in.
318 mm

9 in.
229 mm

PA215-S-3

SR-215M

1800 lbs
816 kg

2000 lbs
907 kg

N/A

80 lbs
36 kg

22 in.
559 mm

4.5 in.
114 mm

12.5 in.
318 mm

9 in.
229 mm

PA235-S-36

SR-235M

N/A

2300 lbs
1043 kg

95 lbs
43 kg

24 in.
610 mm

6 in.
152 mm

16 in.
406 mm

Center mount

Alternate mount

9 in.
229 mm

12 in.
305 mm

*The cup capacities shown above are based on 24″Hg at sea level with a safety factor of two (2) in the horizontal (flat) position.
Rated load capacities are estimated; actual capacity will vary based on the load surface and the level of vacuum.
13600089

FPA rectangle foam pad attachments FPA round foam pad attachments VPF-57-AIR vacuum generator VPF-57-DCP vacuum generator VPF-57-AC vacuum generator VPFL4-AC vacuum generator VPFL4-AIR vacuum generator

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.

ANVER pad attachments with SSR slip-on and DP bolt-on seals

Vacuum lifting pad attachments

Single pad vacuum lifting attachments with slip-on seals

Single pad vacuum lifting attachments with bolt-on seals

Related pages

Need an ANVER system for your load?