VN EN TW
FullSharp
Vietnam+84 332 839 268Taiwan+886 3 451 8806Send requestreply in 24 h
About
Equipment
What do you need to lift
Completed projects
Catalogue
Contact
VNENTW
FullSharp · since 1991

Equipment › ANVER vacuum lifters › EZ-Tilt vacuum lifters › Rectangular cup attachments

ANVER vacuum lifting attachments with rectangular vacuum cups

These pad attachments feature ANVER’s proprietary rectangular vacuum cups with soft, long lips and deep profile, and fit most standard vacuum generators. Single, dual and multi position.

Request a quote

Vacuum lifting pad attachments
featuring rectangular vacuum cups

PA1220-S-3

ANVER vacuum lifters can be outfitted with a variety of interchangeable vacuum pads and vacuum lifting attachments for a wide range of material handling applications. Various single and multiple vacuum pad configurations can be installed on most of our standard vacuum generators. The vacuum lifting pad attachments below feature ANVER’s proprietary rectangular vacuum cups with soft, long lips and deep profile, specifically designed for handling flat, rigid materials such as sheet and plate. They are also excellent for wood, composites, curved panels, stone and other materials. They feature an excellent, versatile design for most applications.

Note: any pad attachments used with EZ-Tilt (series) vertical attachments must use the vertical capacity listed.

Specifications for single vacuum pad attachments:
Manufacturer PDF

Product photoPad attachment numberReplacement seal or pad numberHorizontal rated load lb. (kg)Vertical rated load lb. (kg)Unit weight lbs (kg)A Pad length in. (mm)B Pad width in. (mm)C Pad attachment headroom in. (mm)D Beam length in. (mm)E Hardware mounting centers in. (mm)Minimum load radius in. (mm)
PA411-S-3VP411125
(57)		62
(28)		6
(3)		10.5
(267)		3.8
(97)		3
(76)		11
(279)		9
(229)		9.5
(241)
PA3513SSR-S-3 pad attachment

PA3513SSR-S-3 new with slip-on seals

SSR-3513160
(73)		80
(36)		5.2
(2.4)		12.69
(322)		3.69
(94)		3
(76)		11.5
(292)		9
(229)		8
(203)
PA416-S-3VP416200
(91)		100
(45)		6
(3)		15.5
(394)		3.8
(97)		3
(76)		11
(279)		9
(229)		9.5
(241)
PA512-S-3VP512200
(91)		100
(45)		8
(4)		11.75
(299)		4.6
(117)		3.1
(79)		11
(279)		9
(229)		13
(330)
PA3518SSR-S-3 pad attachmentPA3518SSR-S-3 new with slip-on sealsSSR-3518245
(111)		122
(55)		5.9
(2.7)		17.75
(451)		3.69
(94)		3
(76)		11.5
(292)		9
(229)		8
(203)
PA4512SSR-S-3 pad attachmentPA4512SSR-S-3 new with slip-on sealsSSR-4512230
(104)		115
(52)		5.9
(2.7)		12
(305)		4.88
(124)		3
(76)		11.5
(292)		9
(229)		22
(559)
PA4518SSR-S-3 pad attachmentPA4518SSR-S-3 new with slip-on sealsSSR-4518335
(152)		167
(76)		7.0
(3.2)		17.94
(456)		4.81
(122)		3
(76)		11.5
(292)		9
(229)		13
(330)

PA618-S-3 no longer available; replaced by PA5518SSR-S-3

VP618400
(181)		200
(90)		12
(5)		17.8
(267)		5.8
(147)		3.1
(79)		11
(279)		9
(229)		28
(711)
PA5518SSR-S-3 pad attachmentPA5518SSR-S-3 new with slip-on sealsSSR-5518450
(204)		225
(102)		8.3
(3.8)		18
(457)		5.88
(149)		2.5
(64)		11.5
(292)		9
(229)		39
(991)
PA6520SSR-S-3 pad attachmentPA6520SSR-S-3 new with slip-on sealsSSR-6520550
(249)		275
(124)		10.0
(4.5)		20.13
(511)		6.88
(175)		2.5
(64)		11.5
(292)		9
(229)		37
(940)
PA918-S-3 replaced by PA1117-S-3VP918750
(340)
[@ 22″ Hg]		375
(170)		28
(13)		18.6
(472)		10.0
(254)		3.2
(81)		11.5
(292)		9
(229)		N/A
PA1117-S-3SSR-1117750
(340)		375
(170)		20
(9)		16.75
(426)		11.0
(279)		4.5
(114)		11.5
(292)		9
(229)		N/A
PA1220-S-3PA1220-S-3VP1220A1100
(499)		550
(250)		34
(15)		20.5
(521)		12.1
(307)		3.5
(89)		11.5
(292)		9
(229)		N/A
PA1220-S-36VP1220A1100
(499)		550
(250)		48
(22)		20.5
(521)		12.1
(307)		6
(152)		14.75
(375)		E1E2N/A
9
(229)		12
(305)

*The cup capacities shown above are based on 24 in. Hg (unless stated) at sea level with a safety factor of two (2) in the horizontal (flat), and four (4) in the vertical (upright).
Actual capacity will vary based on the load surface and the level of vacuum.

13600090 A

Specifications for dual pad vacuum pad attachments:
Manufacturer PDF

PA3513-2-24-3-DWG-01In-line models only

PA3518-2-24-3-DWG-01
In-line/perpendicular models only

Product photoANVER part number*Capacity lb (kg)Unit weight lb (kg)Pad orientationA Outside in. (mm)B Pad length in. (mm)C Pad width in. (mm)D Beam length in. (mm)E Hardware mounting centers in. (mm)F Headroom in. (mm)G Mounting hole diameter in. (mm)
Max.Min.
PA3513-2-24-3_375x154PA3513-2-24-3
(76400681)		320
(145)		T.B.D.In-line only32
(813)		26
(660)		12.69
(322)		3.69
(94)		24
(610)		9
(229)		5
(127)		.69
(17)
PA3513-2-36-3_375x126PA3513-2-36-3
(76400681)		320
(145)		T.B.D.In-line only44
(1118)		26
(660)		12.69
(322)		3.69
(94)		36
(914)		9
(229)		5
(127)		.69
(17)
PA3518-2-24-3_375x138PA3518-2-24-3
(76400682)		490
(222)		T.B.D.In-line36
(914)		36
(914)		17.75
(451)		3.69
(94)		24
(610)		9
(229)		5.3
(135)		.69
(17)
Perpendicular22
(559)		19
(483)
PA3518-2-36-3_375x118PA3518-2-36-3
(76400682)		490
(222)		T.B.D.In-line48
(1219)		36
(914)		17.75
(451)		3.69
(94)		36
(914)		9
(229)		5.3
(135)		.69
(17)
Perpendicular34
(864)		19
(483)
PA4512-2-24-3_375x149PA4512-2-24-3
(76400683)		460
(209)		T.B.D.In-line only32
(813)		26
(660)		12
(305)		4.88
(124)		24
(610)		9
(229)		5
(127)		.69
(17)
PA4512-2-36-3_375x124PA4512-2-36-3
(76400683)		460
(209)		T.B.D.In-line only44
(1118)		26
(660)		12
(305)		4.88
(124)		36
(914)		9
(229)		5
(127)		.69
(17)
PA4518-2-24-3_375x137PA4518-2-24-3
(76400684)		670
(304)		T.B.D.In-line36
(914)		36
(914)		17.94
(456)		4.81
(122)		24
(610)		9
(229)		5.3
(135)		.69
(17)
Perpendicular23
(584)		20
(508)
PA4518-2-36-3_375x118PA4518-2-36-3
(76400684)		670
(304)		T.B.D.In-line48
(1219)		36
(914)		17.94
(456)		4.81
(122)		36
(914)		9
(229)		5.3
(135)		.69
(17)
Perpendicular35
(889)		20
(508)
PA5518-2-36-3_375x193PA5518-2-36-3
(76400685)		900
(408)		T.B.D.In-line47
(1194)		37
(940)		18
(457)		5.88
(149)		38
(965)		9
(229)		6
(152)		.69
(17)
Perpendicular35
(889)		25
(635)
PA5518-2-48-3_375x175PA5518-2-48-3
(76400685)		900
(408)		T.B.D.In-line59
(1499)		37
(940)		18
(457)		5.88
(149)		50
(1270)		9
(229)		6
(152)		.69
(17)
Perpendicular47
(1194)		25
(635)

Adjustment knobs
Product photoPart number Description
KNM16X50PHand knob, M16 x 50 mm stud, black plastic. Replaces HDLM16X50ZRAT & HDLM16X60ZRAT
KNM12X45PHand knob, M12 x 45 mm stud, black plastic. Replaces HDLM12X40ZRAT
KNM12X35SPHand knob, M12 x 35 mm stud, small black plastic
Replaces HDLM12X40ZRAT, HDLM12X30ZRAT & KNM12X45SP

13600091 A

Specifications for dual pad – multi position vacuum pad attachments:

ANVER vacuum pad attachment

Compact pad attachment with multi-configuration suspension, easily changes pattern by means of a clevis pin into one or multiple two pad configurations. Typically used on small, heavy loads. Maximum load size should not exceed 3x the pad attachment outer dimension.

Note: not compatible with EZ-Tilt (series) attachments.

SINGLE PAD

Dual pad – inside mounting

Dual pad – outside mounting

Product photoANVER part numberPad arrangementCapacity lbs (kg)Unit weight lbs (kg)Vacuum pad(s) mounting locationPad(s) positionA Outside for dual pads in. (mm)B Pad length in. (mm)C Pad width in. (mm)

D Beam length in. (mm)

E Hardware mounting centers in. (mm)F Headroom in. (mm)G Mounting hole diameter in. (mm)
PA1220-2-2MC dual pad multi position attachmentPA1220-2-2MCSingle pad1100
(499)		54
(25)		CenterPerpendicular / in-lineN/A20.5
(521		12.1
(307)		29
(737)		9
(229)		6.38
(162)		.69
(17)
Dual pad2200
(998)		74
(34)		InnerPerpendicular only26.1
(663)
OuterPerpendicular34.1
(867)
In-line42.5
(1079)

*The pad capacities shown above are based on 24 in. Hg at sea level with a safety factor of two (2) in the horizontal (flat), and four (4) in the vertical (upright).
Actual capacity will vary based on the load surface and the level of vacuum.

Related pages

FPA rectangle foam pad attachmentsFPA round foam pad attachmentsSSR and DP seal pad attachmentsVPF-57-AIR vacuum generatorVPF-57-DCP vacuum generatorVPF-57-AC vacuum generatorVPFL4-AC vacuum generatorVPFL4-AIR vacuum generator

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.

Contact us