Vietnam+84 332 839 268 Taiwan+886 3 451 8806 Send requestreply in 24 h

FullSharp · since 1991

Equipment › ANVER vacuum cups › VC series small vacuum cups

ANVER · Made in USA

ANVER VC series vacuum cups: VC25, VC35, VC40, VC45

ANVER VC25, VC35, VC40 and VC45 cups bond thick rubber to an aluminum base with a center suspension mount, for thin sheet, plastic, auto glass and contoured surfaces. Full dimensions, capacities and matching suspensions are listed below.

Request a quote

VC series vacuum cups with center suspension and vacuum port: VC25, VC35, VC40 and VC45

Comparison: PC cups vs. VC cups.
More information on PFC cups.

Production quality construction with a universal design makes ANVER VC series vacuum cups suitable for most applications. Thick rubber bonded to a machined aluminum base makes these vacuum cups rugged and long lasting. VC vacuum cups are well suited for high duty use found in the automotive industry and in press feeding operations.

Features

Rugged construction design with deep threaded mounting hole for use in heavy production.
Long low-angle lip requires little pressure to make initial contact. This flexibility also compensates for inaccuracies in cup height.
Two inside sealing edges make contact after vacuum is attained and become the main sealing edges for safety.
Strengthened outside lip helps achieve a fast, even release.
Durable, soft rubber bonded to a stiff aluminum hub gives these vacuum cups an excellent non-skid grip.
Cleated bottom makes these vacuum cups excellent for both horizontal and vertical loads.
Suspension assemblies are available in a variety of styles and sizes.

Applications

Light gauge sheet and other thin materials to thick blocks.
Slightly textured surfaces, such as fiberglass panels, plastic, auto panels, auto glass, etc.
Wavy or contoured surfaces.
Porous materials

Vacuum cup materials

The standard material is Blue Nitrile and Red Silicone.
More information: vacuum cup materials.

NPT

Metric – G

VC25 series vacuum cups dimensional specifications

Product photo	Part number and material	A Flared Dia. in. (mm)	C Flex in. (mm)	F Height in. (mm)	G Flat in. (mm)	H Suspension/ Vacuum Port	Horizontal load capacity* lb. (kg) 2 to 1	Item Weight lb (kg)	Adapter fitting for suspension	SLSA3 series suspension
	VC25 (Nitrile)	2.75 (70)	0.26 (7)	1.0 (25.4)	0.98 (25)	1/4″ NPT	15 (6.8)	0.09 (0.04)	No adapter needed
	VC25-G (Nitrile) Metric	2.75 (70)	0.26 (7)	1.0 (25.4)	0.98 (25)	1/4″ G	15 (6.8)	0.09 (0.04)
	VC25-SI (Extreme High Heat Silicone)	2.75 (70)	0.26 (7)	1.0 (25.4)	0.98 (25)	1/4″ NPT	15 (6.8)	0.09 (0.04)	No adapter needed
	VC25-SI-G (Extreme High Heat Silicone) Metric	2.75 (70)	0.26 (7)	1.0 (25.4)	0.98 (25)	1/4″ G	15 (6.8)	0.09 (0.04)

VC35 series vacuum cups dimensional specifications

Product photo	Part number and material	A Flared Dia. in. (mm)	C Flex in. (mm)	F Height in. (mm)	G Flat in. (mm)	H Suspension/ Vacuum Port	Horizontal load capacity* lb. (kg) 2 to 1	Item Weight lb (kg)	Adapter fitting for suspension	SLSA3 series suspension
	VC35 (Nitrile)	3.75 (95)	0.33 (8)	1.38 (35)	0.98 (25)	3/8″ NPT	30 (13)	0.15 (0.07)
	VC35-G (Nitrile) Metric	3.75 (95)	0.33 (8)	1.38 (35)	0.98 (25)	3/8″G	30 (13)	0.20 (0.09)	No adapter needed
	VC35-SI (Extreme High Heat Silicone)	3.75 (95)	0.33 (8)	1.38 (35)	0.98 (25)	3/8″ NPT	30 (13)	0.15 (0.07)
	VC35-SI-G (Extreme High Heat Silicone) Metric	3.75 (95)	0.33 (8)	1.38 (35)	0.98 (25)	3/8″ G	30 (13)	0.15 (0.07)	No adapter needed

VC45 series vacuum cups dimensional specifications

Product photo	Part number and material	A Flared Dia. in. (mm)	C Flex in. (mm)	F Height in. (mm)	G Flat in. (mm)	H Suspension/ Vacuum Port	Horizontal load capacity* lb. (kg) 2 to 1	Item Weight lb (kg)	Adapter fitting for suspension	SLSA3 series suspension
	VC45 (Nitrile)	4.63 (118)	0.38 (10)	1.61 (41)	1.26 (32)	3/8″ NPT	55 (24)	0.34 (0.15)
	VC45-G (Nitrile) Metric	4.63 (118)	0.38 (10)	1.61 (41)	1.26 (32)	3/8″ G	55 (24)	0.34 (0.15)	No adapter needed
	VC45-SI (Extreme High Heat Silicone)	4.63 (118)	0.38 (10)	1.61 (41)	1.26 (32)	3/8″ NPT	55 (24)	0.35 (0.16)
	VC45-SI-G (Extreme High Heat Silicone) Metric	4.63 (118)	0.38 (10)	1.61 (41)	1.26 (32)	3/8″ G	55 (24)	0.35 (0.16)	No adapter needed

VC40 series vacuum cups dimensional specifications

Product
photo

Part number
and material

A
Flared Dia.
in.
(mm)

C
Flex
in.
(mm)

F
Height
in.
(mm)

G
Flat
in.
(mm)

H
Suspension/
Vacuum
Port

Horizontal load
capacity*
lb.
(kg)
2 to 1

Weight
lb
(kg)

Adapter
fitting
for suspension

SLSA3
series
suspension

VC40
(Nitrile)
Metric

4.00
(100)

4.25
(110)

1.18
(30)

0.95
(24)

3/8″ G

45
(20)

0.18
(0.08)

No
adapter
needed

The cup capacities shown above are based on 24″Hg at sea level with a safety factor of two (2) in the horizontal (flat), and four (4) in the vertical (upright). Vertical Load Capacity is half of the listed Horizontal Load Capacities above.
Rated Load Capacities are estimated; actual capacity will vary based on the load surface and the level of vacuum.

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.