5T Rail Jib Crane with Knight Air Balancer

A workstation had to pick up and set down parts many times a day, and each time it had to land in exactly the right spot before the operator could let go. Lifting by hand caused shaking, placement often bumped the target, and operators' shoulders tired after a few hours. The area to be covered was also wider than arm's reach.

FullSharp built a jib crane from a 5T rail (200 kg rated) to cover the full working radius, combined with a Knight Global air balancer mounted on the trolley. The air balancer counterbalances the load's weight with compressed air, so the load stays still at any height. The operator only needs to push lightly for the load to follow.

5T Rail Jib Crane Integrated with a Knight Global Air Balancer

A 5T rail jib crane with a Knight Global air balancer installed at a workstation.

Installed Equipment

5T rail rotating arm: a beam made from 5T steel rail, rated at 200 kg, rotating around the post to cover the working area.
Knight Global air balancer: counterbalances the load using compressed air, keeping it suspended stably at any height.
Control handle: responds instantly when lifting or lowering, operated with one hand.
Trolley on the arm: runs smoothly along the arm to bring the suspension point to the exact pickup and placement spot.
Air filter and pressure regulator: supplies clean, pressure-stabilized air so the air balancer holds the load evenly.

Key Specifications

Rail code5T steel rail
Rated load200 kg
Lift-assist deviceKnight Global air balancer
Mounting typeJib crane
Installation photos2 photos

Benefits for Your Factory

Load feels weightless

The air balancer offsets the load's weight, so the operator only guides direction.

Accurate positioning

The load stays still at any height, so it lands in the target spot without overshooting.

Saves energy all shift

Repeated motion stays light, easing strain on shoulders and lower back.

Real Installation Photos

5T Rail Jib Crane Integrated with a Knight Global Air Balancer - photo 1

Click a photo to enlarge. Album of 1 photo taken on site.

Suitable Applications

Assembly stations with high repetition
Feeding and unloading parts for machines
Packing areas for small and medium products
Mechanical, electronics, and home appliance plants

Get Advice on an Installation for Your Factory

FullSharp measures the radius to cover, the working height, and the compressed air supply available at your factory. Our engineers select the air balancer based on the actual part weight, install the jib crane, run tests, and guide you on adjusting the balance.