500kg Jib Crane, Wall-Mounted for Tight Shop Corners

FullSharp installs a 500 kg wall-mounted jib crane for small shops that need to lift parts of several hundred kilograms in a fixed corner with no room for a crane post. The whole system bolts to the wall with brackets and anchor bolts, the arm rotates on its pivot, and the floor below stays fully clear for work.

Small shops often have no room to erect a crane post, yet still need to lift parts weighing several hundred kilograms in a fixed corner. Manual jacking is slow, and bringing a forklift into a tight corner is hard to maneuver.

FullSharp installs a 500 kg wall-mounted jib crane, with the entire system bolted to the wall structure using brackets and anchor bolts. The arm rotates around its pivot, so the floor below stays completely clear.

500 kg Wall-Mounted Jib Crane for Tight Shop Corners

500 kg wall-mounted jib crane installed in a work corner of the shop.

Equipment Installed

Wall-mounted arm: a steel beam rotating around a pivot, covering the work area in an arc.
Wall anchor bracket assembly: brackets and anchor bolts sized to the actual wall or column structure.
Trolley on the arm: moves the lifting point in and out to match the required reach.
Lifting unit under the trolley: a hoist or manipulator selected to match the cargo type and work pace.

Key Specifications

Load capacity500 kg
Mounting typeWall-mounted

Benefits for Your Facility

No floor space used

With no post on the ground, the corner still has enough room to work in.

Fast installation

Only a sturdy wall structure is needed, no anchor foundation in the floor.

Enough capacity for small shops

500 kg covers most parts in small and medium mechanical shops.

Actual Installation Photos

500 kg Wall-Mounted Jib Crane for Tight Shop Corners - photo 1

Click a photo to enlarge. Album of 1 photo taken on site.

Suitable Applications

Tight work corners in small shops
Machining stations against a wall or column
Repair and maintenance areas
Loading and unloading points for carts

Frequently asked questions

Can a 500 kg jib crane be mounted on a wall?

Yes, if the wall or column can take the load. Brackets and anchor bolts are sized to the actual structure, and FullSharp checks the wall before installation.

What lifting unit goes on a wall-mounted jib?

A hoist or a manipulator hangs under the trolley, chosen to match the cargo type and work pace. The trolley moves in and out to set the reach.

Why not use a forklift in a shop corner?

Forklifts are hard to maneuver in tight corners and manual jacking is slow. A wall jib is always in place and covers the work area in an arc.

Similar projects

Get an Installation Consultation for Your Facility

FullSharp checks the wall or column structure, the required load, and the actual reach before finalizing the anchor plan. We recalculate the bracket assembly to match the site conditions, then install, load-test, and hand it over to your shop.

500 kg Wall-Mounted Jib Crane for Tight Shop Corners with No Room for a Crane Post