VN EN TW
FullSharp
Vietnam+84 332 839 268Taiwan+886 3 451 8806Send requestreply in 24 h
About
Equipment
What do you need to lift
Completed projects
Catalogue
Contact
VNENTW
FullSharp · since 1991

FullSharp suspended a pneumatic jib crane from the steel structure over a workstation and fitted a 100 kg vacuum pad for steel sheets loaded and unloaded all shift. The arm swings a full 360 degrees from the stack to the machine table, keeps each sheet level and steady, and takes up no floor space, replacing slow crane and chain lifts.

At this stage, steel sheets weigh around 100 kg and must be loaded and unloaded continuously throughout the shift. Using a crane and chains is slow and lets the sheet swing, while manual carrying is too heavy and risks pinching hands.

FullSharp suspended a pneumatic jib crane from the structure above the workstation and fitted a 100 kg vacuum lifting pad to the end of the arm. The arm rotates a full 360 degrees, so the sheet can be picked from the stack and swung directly onto the machine table, staying level and steady the whole time.

Suspended Pneumatic Jib Crane with Vacuum Lifter for 100 kg Steel Sheets

The suspended pneumatic jib crane above the machine table, with the vacuum lifting pad holding the customer's steel sheet.

Installed Equipment

  • Suspended rotating arm: mounted to an existing beam or steel frame, rotates a full 360 degrees, and takes up no floor space.
  • Steel sheet vacuum pad: rigid lifting frame with load-rated suction cups, keeping the 100 kg sheet level throughout the lift.
  • Vacuum pump and reservoir tank: maintains stable vacuum with reserve capacity when air supply fluctuates.
  • Lifting control handle: raise and lower with one hand while the other guides the sheet.
  • Low-vacuum alarm: sounds immediately if vacuum drops below the safe threshold.

Key Specifications

  • Load capacity100 kg
  • Rotation angle360 degrees
  • Mounting typeSuspended from structure
  • Handled materialSteel sheets, flat panels

Benefits for Your Plant

Faster sheet handling

No need to hook chains or balance the load as with a crane. Press the pad onto the sheet and lift right away.

No swinging sheets

The rigid arm holds the sheet steady instead of hanging it on flexible chains. It lands in the right position on the machine table the first time.

Safer for operators

Workers no longer need to grip the sharp edges of the steel sheet. The alarm warns whenever vacuum pressure drops.

Installation Photos

Suspended Pneumatic Jib Crane with Vacuum Lifter for 100 kg Steel Sheets - photo 1 Suspended Pneumatic Jib Crane with Vacuum Lifter for 100 kg Steel Sheets - photo 2 Suspended Pneumatic Jib Crane with Vacuum Lifter for 100 kg Steel Sheets - photo 3 Suspended Pneumatic Jib Crane with Vacuum Lifter for 100 kg Steel Sheets - photo 4 Suspended Pneumatic Jib Crane with Vacuum Lifter for 100 kg Steel Sheets - photo 5 Suspended Pneumatic Jib Crane with Vacuum Lifter for 100 kg Steel Sheets - photo 6

Click a photo to enlarge. 6-photo album taken on site.

Suitable Applications

  • Feeding cutting and punching machines
  • Steel structure workshops
  • Steel and stainless steel sheet warehouses
  • Electrical cabinet and enclosure fabrication lines

Related Products and Projects

Frequently asked questions

Can a jib crane be hung from an existing beam?

Yes. The rotating arm mounts to an existing beam or steel frame above the station, turns 360 degrees and uses no floor space. FullSharp checks the structure before confirming the mount.

How does a vacuum lifter keep a 100 kg sheet level?

A rigid frame carries load-rated suction cups spread across the sheet, so it stays flat during the lift. One hand works the control handle while the other guides the sheet.

What safety features does the vacuum system have?

A reservoir tank keeps reserve vacuum if supply fluctuates, and a low-vacuum alarm sounds as soon as the level drops below the safe limit, warning the operator before trouble starts.

Similar projects

Consulting for Your Plant

FullSharp surveys the overhead structure, checks the beam's load capacity, and measures the flatness and thickness of your steel sheets. We then finalize the pad type, number of suction cups, and arm reach to match your floor plan. Schedule a site survey with FullSharp for a specific proposal.

Contact us for a survey and quoteView completed projects