VN EN TW
FullSharp
Vietnam+84 332 839 268Taiwan+886 3 451 8806Send requestreply in 24 h
About
Equipment
What do you need to lift
Completed projects
Catalogue
Contact
VNENTW
FullSharp · since 1991

Equipment › ANVER vacuum lifters › Standard lifting frames › LG1120M4 4-pad lifting frame

ANVER LG1120M4 4-pad vacuum lifting frame, 11,200 lb capacity

The LG1120M4 series are 4-pad vacuum lifting frames rated up to 11,200 lb (5,080 kg) for carbon steel, stainless steel and non-ferrous plate such as aluminum. The table lists 4 frame models with their dimensions.

Request a quote

Four pad vacuum lifter lifting frames

For standard four pad lifters – capacity up to 11200 lb (5080 kg)

Manufacturer PDF

ANVER 4-pad vacuum lifting frame

ANVER’s standard lifting frames are built to order using modular components, so there are hundreds of possible combinations depending on the vacuum generator, beam, crossarms and vacuum cups selected.

ANVER vacuum lifters comply with ASME B30.20 and ASME BTH-1 standards. Specifications and rated capacities vary by configuration, and users remain responsible for full compliance with workplace safety, inspection, and operating regulations.

The LG1120M4-Series four-pad lifting frames are ideal for handling carbon steel and stainless steel sheets, plates and non-ferrous materials like aluminum with a capacity up to 11200 lb (5080 kg). The type of vacuum lifter – mechanical, electric or battery – paired with the number of pads used will depend on your application needs.

Lifting frame shown with vacuum generator and/or optional accessories, which are sold separately. Unit weight does not include vacuum generator or optional equipment (parking stands, etc.). To calculate total unit weight, add the compatible generator weight to the lifting frame weight and deduct it from crane capacity.

Features
  • Fully welded rigid frame makes the load handling stable via a high hook point. Reinforcement bracing provided on longer length lifting beams.
  • The GF-Frame includes a main vacuum reservoir as a primary with a secondary reservoir running the entire length of the spreader beam, resulting in near instant attach time and maximizing productivity.
  • Front handlebar and end of beam tag line loops provided to facilitate maneuvering.
  • Quad mounted vacuum pads feature top & bottom springs to handle wavy plate.
  • Bolt-on sealing rings feature rugged seals that can be replaced easily. This can be done in minutes with the lifter resting on its parking stands (sold separately).
  • Standard modular construction allows quick service and/or replacement of Vac-Packs, as needed to minimize downtime.
LG1120M4 lifting frame dimension drawing
Compatible vacuum generators
Electric or battery**
GF10T series vacuum generator
GF10T series
Lifting frame numberLG1120M4-162LG1120M4-198LG1120M4-243LG1120M4-288
Rated load capacity [lbs (kg)]11200 (5080)11200 (5080)11200 (5080)11200 (5080)
Approximate unit weight [lbs (kg)]1294 (587)1450 (658)2250 (1021)2900 (1316)
A Lifting frame headroom [in. (mm)]60 (1527)60 (1527)60 (1527)60 (1527)
B Spreader beam length [in. (mm)]162 (4115)198 (5029)243 (6172)288 (7315)
C Outer pad centers maximum [in. (mm)]144 (3658)180 (4572)225 (5715)270 (6858)
C Outer pad centers minimum [in. (mm)]96 (2439)120 (3048)150 (3810)180 (4572)
D Pad size [in. (mm)]21 x 29.75
(533 x 756)		21 x 29.75
(533 x 756)		21 x 29.75
(533 x 756)		21 x 29.75
(533 x 756)
Maximum load size [ft (m)]16 x 6 (4.8 x 1.8)20 x 6 (6.1 x 1.8)25 x 6 (7.6 x 1.8)30 x 6 (9.1 x 1.8)
*Minimum load size [in. (mm)]45 x 31
(1143 x 788)		45 x 31
(1143 x 788)		45 x 31
(1143 x 788)		45 x 31
(1143 x 788)
Minimum load thickness at maximum length & width [in. (mm)]11 ga. (3)11 ga. (3)11 ga. (3).188 (5)
Vacuum pad numberVP2129QVP2129QVP2129QVP2129Q
Optional parking standsPST30-31-21PST30-31-21PST30-31-21PST30-31-21

*Minimum load sizes are with outer vacuum pads shut off (1/2 rated load). Load capacities at 24 in. Hg, sea level.

**Battery powered vacuum generators are only recommended when handling non-porous loads.

13600138 A

Various plate sizes can be handled by adjusting the vacuum pad positions on the beam

Pad positions on 4-pad frame, diagram 1
Vacuum pads in maximum position to handle maximum plate size.
Pad positions on 4-pad frame, diagram 2
Vacuum pads moved inwards to handle minimum plate size.
Pad positions on 4-pad frame, diagram 3
Center vacuum pads (1/2 capacity) used for short, narrow plates. Outer pads provided with shut-off valves.

Related pages

L100M4 4-pad lifting frameL560M2 2-pad lifting frameL100M2 2-pad lifting frameLG1000M10 10-pad lifting frameLG1040M8 8-pad lifting frameLG1050M14 14-pad lifting frameLG1200M12 12-pad lifting frameLG1240M8 8-pad lifting frameLG1280M4 4-pad lifting frameLG1300M10 10-pad lifting frameLG1400M14 14-pad lifting frameLG1550M10 10-pad lifting frame

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.

Contact us