Vietnam+84 332 839 268 Taiwan+886 3 451 8806 Send requestreply in 24 h

FullSharp · since 1991

Equipment › Ergonomic Vacuum Lifting Systems › ANVER VT Systems › VT Accessories and Parts › Bottom Swivels and Quick Releases

ANVER · Made in USA

ANVER Bottom Swivel Assemblies and Quick Releases for Tube Lifters

Assemblies that fit between the lift head and the pad attachment of ANVER VT vacuum tube lifters: quick releases, bottom swivels, universal swivels, 90° tilter adapters and extensions, listed by Mini and Standard series.

Request a quote

Vacuum tube lifting system quick release with spring lock

Quick Release for Fast Changing of Pad Attachments from the Lifting Head

Manufacturer PDF

Quick release with spring lock fitted on an ANVER vacuum tube lifter

ANVER Vacuum Tube Lifter Quick Release with Spring Lockmakes changing lifting heads fast and easy. Allowing the operator to quickly change vacuum tube lifter pad attachments for varying load handling requirements. Their use minimizes downtime, maximizing productivity. ANVER's design allows you to rotate the pad and lock it in position with 90 degree stops. Made of aluminum.

(VT-QRT-S-4P and VT-QRB-S-4P shown. See in chart below)

Quick disconnect ordering information

Quick Release for VT Model Vacuum Tube Lifters

Product Photo

Part Number

Description

Attaches To

Added Height

Item Weight lb (Kg)

For Use with ANVER Vacuum Tube Lifter VT Models

For Use with Mini Series Vacuum Tube Systems – 450 LB. CAPACITY

VT-QRT-M-4P

Mini Quick Release Top With Spring Lock

Top Tube Lift Head

See Quick Release Bottom

0.73
(0.33)

VT-QRTA-MS-4P

Quick Release Top Adaptor Assembly Mini Can to Standard (VT-QRT-S-4P) Top

Top Tube Lift Head

.88
(23)

1.74
(0.79)

VT-QRB-M-4P

Mini Quick Release Bottom With Spring Lock

Bottom Pad Attachment

1.6
(41)

0.87
(0.39)

VT-QRB-M-T1-4P

Mini Quick Release Bottom For small single pads with T1 mounting

Bottom Pad Attachment

1.97
(50)

1.18
(0.54)

For Use with Mini Pistol Grip Series Vacuum Tube Systems – 100 LB. CAPACITY

VT-QRT-PG-4P

Mini Pistol Grip Quick Release Top With Spring Lock

Top Tube Lift Head

See Quick Release Bottom

0.54
(0.24)

ANVER VT100 Pistol Grip vacuum tube lifter

VT-QRB-PG-4P

Mini Pistol Grip Quick Release Bottom With Spring Lock

Bottom Pad Attachment

1.6
(41)

0.22
(0.10)

For Use with Standard Series Vacuum Tube Systems – 700 LB. CAPACITY

VT-QRT-S-4P

Standard Quick Release Top With Spring Lock

Top Tube Lift Head

See Quick Release Bottom

2.05
(0.93)

ANVER VT160 vacuum tube lifter

ANVER VT180 vacuum tube lifter

ANVER VT230 vacuum tube lifter

VT-QRB-S-4P

Standard Quick Release Bottom With Spring Lock

Bottom Pad Attachment

2.02
(51)

1.68
(0.76)

VT-QRB-S-T1-4P

Standard Quick Release Bottom For small single pads with T1 mounting

Bottom Pad Attachment

2.52
(64)

2.86
(1.30)

13600085 C

Vacuum tube lifting system quick release

Quick Release for Fast Changing of Pad Attachments from the Lifting Head

Manufacturer PDF

ANVER vacuum tube lifter with quick release lifting a bag

ANVER Vacuum Tube Lifter Quick Release, made of 304 stainless steel, allow the operator to quickly change vacuum tube lifter pad attachments for varying load handling requirements. Their use minimizes downtime, maximizing productivity. ANVER's design allows you to fully rotate the pad and lock it in any position. Remember, the complete quick release assembly adds 2.65″ (67 mm) to the system's overall headroom requirements.

Group of ANVER stainless steel quick releases

Quick disconnect ordering information

Quick Release for VT Model Vacuum Tube Lifters

Product Photo

Part Number

Description

Attaches To

Added Height

Item Weight lb (Kg)

For Use with ANVER Vacuum Tube Lifter VT Models

For Use with Mini Series Vacuum Tube Systems

VT-QRT-M

Mini Quick Release Top – Stainless Steel

Top Tube Lift Head

2.65
(67)

1.56
(0.71)

VT-QRB-M

Mini Quick Release Bottom – Stainless Steel

Bottom Pad Attachment

0.65
(0.29)

For Use with Standard Series Vacuum Tube Systems – 2″ Diameter

VT-QRT-S

Standard 2 Inch Quick Release Top – Stainless Steel

Top Tube Lift Head

2.65
(67)

2.19
(0.99)

ANVER VT180 vacuum tube lifter

VT-QRB-S

Standard 2 Inch Quick Release Bottom – Stainless Steel

Bottom Pad Attachment

1.31
(0.59)

For Use with Standard Series Vacuum Tube Systems – 4″ Diameter

VT-QRT-S-HD

Standard Heavy Duty 4 Inch Quick Release Top – Stainless Steel

Top Tube Lift Head

2.65
(67)

2.68
(1.21)

VT-QRB-S-HD

Standard Heavy Duty 4 Inch Quick Release Bottom – Stainless Steel

Bottom Pad Attachment

1.75
(0.79)

13600086 A

Vacuum tube lifting system – bottom swivel assemblies and universal swivels

Manufacturer PDF

ANVER VT-SW-M bottom swivel assembly for vacuum tube lifters

Bottom Swivel Assembly Features:

The 360° bottom swivel assembly, made of 304 stainless steel, allows full rotation of the load under the vacuum tube lifter control head. This allows the attached load to be precisely spun into position while keeping the control head in front of the operator.
Allows for easier and more precise positioning of loads. Commonly used when unloading pallet loads of boxes to a skid with different orientations.
Designed to offer easy rotation with just enough drag so that the load does not just keep spinning.

Bottom Swivel Assembly Dimensional Specifications:

Drawing of bottom swivel assembly dimensions A and B

Product Photo

Part No.

A
in. (mm)

B
in. (mm)

Item Weight lb (Kg)

For Use with VT Systems:

For Use with Mini Series Vacuum Tube Systems

VT-SW-M

3.15
(80)

2.0
(51)

2.17
(0.98)

VT-SW-M-LP

3.15
(80)

2.0
(51)

2.46
(1.12)

For Use with Standard Series Vacuum Tube Systems

VT-SW-S

4.72
(120)

1.8
(45)

3.97
(1.80)

VT-SW-S-LP

4.72
(120)

1.8
(45)

4.14
(1.88)

Vacuum tube lifting system tilt adapters

90° Tilter Adapters

ANVER 90° tilter adapter for vacuum tube lifting systems

90° Tilter Adapter – Below the Head Type

ANVER Vacuum Tube Lifters can be equipped with a variety of adapters to make your lifting jobs as simple as possible. These 90° Tilter Adapters allow the operator to transfer loads easily between the horizontal and vertical position. This sturdy stainless steel assembly connects the bottom of the lifting head to the top of the pad attachment for greater control of the load.

Features:

Indexing Plunger holds the pad in place for vertical attachment.
Flexible Vacuum Hose and two sealing gaskets provide airtight connection.
Rugged Stainless Steel construction.
Industry-standard hole pattern mounts to almost any pad or lift head.

Part Number	Item Weight lb (Kg)	Description
For Use with Mini Series Vacuum Tube Systems
VT-TILT-M	3.00 (1.36)	90° Gravity Tilter for Mini Series Vacuum Tube Lifters
VT-TILT-M-H	3.64 (1.65)	90° Gravity Tilter for Mini Series Vacuum Tube Lifters with Handle
For Use with Standard Series Vacuum Tube Systems
VT-TILT-S	6.44 (2.92)	90° Gravity Tilter for Standard Series Vacuum Tube Lifters
VT-TILT-S-H	7.01 (3.18)	90° Gravity Tilter for Standard Series Vacuum Tube Lifters with Handle

Universal swivels for vacuum tube lifters – stainless steel

Universal swivel assembly for vacuum tube lifters

Universal Swivel Features:

ANVER's Stainless Steel Universal Swivels are used to save wear and tear to the vacuum lifting tubes while handling somewhat unbalanced loads.
The universal swivel ensures that the load's weight hangs directly under the center of the vacuum lift tube, extending the lift tube life.
Quality construction using heavy gauge stainless steel with all wear points using nylon bearing sleeves. The swivel comes with four mounting holes of which two will fit most other vacuum tube lifters on the market.

Universal swivel dimensional specifications

Drawing of universal swivel assembly dimensions A and B

Swivel Part No.

A
in. (mm)

B
in. (mm)

Item Weight lb (Kg)

For Use with VT Systems:

For Use with Mini Series Vacuum Tube Systems

VT-UAS-M

3.15
(80)

4.75
(121)

3.49
(1.58)

For Use with Standard Series Vacuum Tube Systems

VT-UAS-S

4.72
(120)

5.75
(146)

6.36
(2.88)

13600105 A

Quick release extensions

ANVER Quick Release extensions are useful for applications where the load must be picked up from a location where it is difficult to maneuver the lift tube. By creating a longer distance from the Lift Head to the Pad Attachment, these extensions make sure that the tube lifter is comfortable and easy to operate. With an ANVER quick release system, the extensions can be attached or removed in seconds, making it easy to adapt to differing load sizes and shapes.

Features:

Heavy Duty Welded Steel Construction
A Variety of Sizes Available to fit Any Application
Attaches quickly and easily to ANVER quick release adapters.
Nickel Plating Also Available – Please Consult Factory

	Quick Release Extensions for Vacuum Tube Lifters
	Part Number	Item Weight lb (Kg)	Description	Quick Release Extensions	Custom Extensions
VT-QRE-06	2.25 (1.02)	Quick Release Extension, 6″ (15.2 cm)
VT-QRE-10	3.07 (1.39)	Quick Release Extension, 10″ (25.4 cm)
VT-QRE-14	3.89 (1.76)	Quick Release Extension, 14″ (35.6 cm)
VT-QRE-18	4.71 (2.14)	Quick Release Extension, 18″ (45.7 cm)
VT-QRE-22	5.53 (2.51)	Quick Release Extension, 22″ (55.9 cm)