VN EN TW
FullSharp
Vietnam+84 332 839 268Taiwan+886 3 451 8806Send requestreply in 24 h
About
Equipment
What do you need to lift
Completed projects
Catalogue
Contact
VNENTW
FullSharp · since 1991

Equipment › ANVER vacuum lifters › EZ-Tilt vacuum lifters › FPA rectangle foam pad attachments › FP28–FP150 round foam pads › VPHA suspension adapters › OC oval and rectangular cups

ANVER OC and VP series oval and rectangular vacuum cups

Oval and rectangular cups with soft long lips, deep profile, a bonded aluminum hub and an inside sealing ring. Specifications for oval flat, medium oval and large rectangular cups.

Request a quote
VP series oval and rectangular vacuum pads

ANVER has released a new line of improved
oval/rectangular cups with replaceable slip-on seals

Features:

  • Easy-to-install replacement slip-on seals make maintenance simple and economical.
  • Short lip seals attach quickly and evenly.
  • Standard ball swivel or rigid mounting on all pads.
  • Cleated bottom maximizes capacity – excellent for both horizontal and vertical loads.

Vacuum cups and suction cups
Oval or rectangular vacuum cups for long narrow loads – ruggedly built for vacuum lifting devices

ANVER oval and rectangular vacuum cups

These oval or rectangular vacuum cups with soft, long lips and deep profile are specifically designed for handling flat, rigid materials such as sheet and plate. They are also excellent for wood, composites, curved panels, stone and other materials. They feature an excellent, versatile design for most applications. They can be used individually or in series.

Features:

  • The vacuum hub is a machined aluminum plate bonded to the cup. There is no leakage as all mounting holes are sealed on the bottom.
  • The vacuum cup is supplied with pre-drilled and tapped mounting holes and a vacuum port. No drilling is required.
  • The vacuum cups include an inside sealing ring for added security. Capacity is calculated from this inside seal for a strong conservative load rating.
  • The seal is bonded onto an aluminum hub.

Vacuum cup materials:

  • The standard materials are ANVERFLEX™ polyurethane (PUR) and blue colored NBR. Silicone is also available as shown; contact the factory for more information.

  • For more information on the materials, click here.

Specifications for oval flat vacuum cups:
OC12-128 oval flat vacuum cup drawing
Note: The seven (7) M6x1.0 holes above can be used for mounting and for the vacuum. The holes are drilled and tapped through the aluminum and can be used for mounting and/or vacuum porting. The holes are vacuum tight because they are supplied sealed with urethane from the bottom. We recommend using four or six outside holes for mounting and the center hole(s) for the vacuum port. Simply cut out the urethane from the bottom of the holes you are using for vacuum.

Product photoCup no. and material A*
in.
(mm)		 B*
in.
(mm)		 C
in.
(mm)		 D
in.
(mm)		 E
in.
(mm)		 F
in.
(mm)		 H
in.
(mm)		Item weight oz. (grams)Rated load** (vertical) lb (kg)Rated load** (horizontal) lb (kg)

OC12-128-NBR

12.38
(314)

1.38
(35)		0.63
(16)		4.00
(102)		8.00
(203)		10.5
(267)		0.71
(18)		4.55
(129)		25
(11)		50
(23)

Specifications for medium oval vacuum cups:
Medium oval vacuum cup drawing

Product photoCup no. and material A*
in.
(mm)		 B*
in.
(mm)		 C
in.
(mm)		 D
in.
(mm)		 E
in.
(mm)		F
in.
(mm)		 H
in.
(mm)		Flat loadsCylindrical loadsWeight lb (kg)
Rated load capacity** (vertical) lb (kg)Rated load capacity** (horizontal) lb (kg)Rated load capacity** (horizontal) lb (kg)Minimum load radius in. (mm)

VP411-NBR (NBR) Same mounting as the OC32-100 below.

10.50
(267)

3.75
(96)		3.38
(86)		1.25
(32)		0.38
(9.6)		5.00
(127)		0.95
(24)		62
(28)		125
(57)		62.5
(28)		9.50
(241)		0.95
(0.43)

VP411-SI (SI) Special order only. Same mounting as the OC32-100 below.

10.50
(267)

3.75
(96)		3.38
(86)		1.25
(32)		0.38
(9.6)		5.00
(127)		0.95
(24)		62
(28)		125
(57)		62.5
(28)		9.50
(241)		0.95
(0.43)
OC32-100

OC32-100 (Polyurethane)

10.50
(267)

3.63
(92)		3.38
(86)		1.25
(32)		0.38
(9.6)		5.00
(127)		1.03
(26)		62
(28)		125
(57)		N/AN/A0.76
(0.35)
RFQPhoto3DCup No.ABCDEFHFlat – cap.Flat – cap.Cylindrical cap.Min. radiusWeight
OC32-150

VP416-NBR (NBR) Same mounting as the OC32-150 below.

15.50
(394)

3.75
(96)		5.88
(149)		1.25
(32)		0.38
(9.6)		5.00
(127)		0.95
(24)		100
(45)		200
(91)		100
(45)		9.50
(241)		1.51
(0.68)

VP416-SI (SI) Same mounting as the OC32-150 below.

15.50
(394)

3.75
(96)		5.88
(149)		1.25
(32)		0.38
(9.6)		5.00
(127)		0.95
(24)		100
(45)		200
(91)		100
(45)		9.50
(241)		1. 51
(0.68)
OC32-150

OC32-150 replaced by VP416 (see above)

15.50
(394)

3.63
(92)		5.88
(149)		1.25
(32)		0.38
(9.6)		5.00
(127)		1.03
(26)		95
(43)		190
(86)		N/AN/A1.24
(0.56)
RFQPhoto3DCup No.ABCDEFHFlat – cap.Flat – cap.Cylindrical cap.Min. radiusWeight
VP512-NBR

Can be replaced by VP4512R

11.75
(299)		4.6
(117)		3.63
(92)		1.50
(38)		0.50
(13)		5.00
(127)		1.10
(28)		100
(45)		200
(91)		100
(45)		13
(330)		1.78
(0.81)

VP512-SI

Replaced by VP4512R

11.75
(299)		4.6
(117)		3.63
(92)		1.50
(38)		0.50
(13)		5.00
(127)		1.10
(28)		100
(45)		200
(91)		100
(45)		13
(330)		1.78
(0.81)
OC46-112

OC46-112

Replaced by VP4512R

12.00
(305)		4.75
(121)		3.63
(92)		1.50
(38)		0.50
(13)		5.00
(127)		1.27
(32)		100
(45)		200
(91)		N/AN/A1.57
(0.71)

Specifications for large rectangular vacuum cups:


OC56-177 & OC64-200

VP618-NBR & VP720-NBR
Product photoCup no. and material A*
in.
(mm)		 B*
in.
(mm)		 C
in.
(mm)		D
in.
(mm)		E
in.
(mm)		 H
in.
(mm)		Flat loadsCylindrical loadsWeight lb (kg)
Rated load** (vertical) lb (kg)Rated load** (horizontal) lb (kg)Rated load** (horizontal) lb (kg)Minimum load radius in. (mm)
OC56-177

VP618-NBR
(NBR)
Same mounting as
the OC56-177 below.

VP618-NBR is not available. See VP5518-NBR for replacement.

17.81
(452)		5.81
(148)		6.00
(152)		6.00
(152)		2.50
(64)		1.10
(28)		200
(90)		400
(180)		200
(91)		28
(71)		4.0
(1.8)
VP618-SI (SI) Same mounting as the OC56-177 below.17.81
(452)		5.81
(148)		6.00
(152)		6.00
(152)		2.50
(64)		1.10
(28)		200
(90)		400
(180)		200
(91)		28
(71)		4.0
(1.8)
OC56-177OC56-177 (polyurethane) replaced by VP618-NBR18.00
(457)		5.88
(149)		6.00
(152)		6.00
(152)		2.50
(64)		1.27
(32)		200
(90)		400
(180)		N/AN/A3.65
(1.66)
RFQPhoto3DCup No.ABCDEHFlat – cap.Flat – cap.Cylindrical cap.Min. radiusWeight
OC64-200VP720-SI
(SI)
Same mounting as
the OC64-200 below. VP720-NBR is not available. See VP6520-NBR for replacement.		19.50
(495)		6.63
(168)		6.00
(152)		6.00
(152)		2.50
(64)		1.10
(28)		275
(124)		550
(249)		275
(125)		39
(990)		5.25
(2.4)
OC64-200 OC64-200 (Polyurethane)19.75
(502)		6.75
(171)		6.00
(152)		6.00
(152)		2.50
(64)		1.27
(32)		275
(124)		550
(249)		N/AN/A4.82
(2.18)

* Note: “A” and “B” dimensions given are when the cup is flared under vacuum.

**The cup capacities shown above are based on 24″Hg at sea level with a safety factor of two (2) in the horizontal (flat),
and four (4) in the vertical (upright).
Rated load capacities are estimated; actual capacity will vary based on the load surface and the level of vacuum.

Pad attachments for vacuum lifters
Examples and specifications of pad attachments
with ANVER oval and rectangular vacuum pads

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.

Contact us