Equipment › ANVER Vacuum Components › Vacuum Switches and Sensors › JTSE electronic vacuum switch › JTSE-NPN Vacuum Switch
JTSE-NPN converts vacuum level into a digital signal for PLCs and an analog output for on/off control. The ANVER standard unit is PNP.
Vacuum and Pressure Switches
Electronic Vacuum Switch (JTSE-NPN)
The JTSE-NPN Electronic Vacuum Switch converts the vacuum level into digital output for connection to PLC systems as well as into analog output for the on/off control. The JTSE-NPN Switch will allow continuous feedback and adjustment capability over a 0 to 29.5 in Hg range. This switch features an NPN Open Collector Output Transistor Configuration. (For PNP configuration see ANVER Pressure Switch Model JTSE.)
NOTE: ANVER standard unit is PNP.
| Part Number | |
| JTSE-NPN |
The JTSE-NPN Electronic Vacuum Switch connects easily and conveniently to ANVER JB Series Vacuum Generators under the nozzle and muffler.
Specifications for JTSE Vacuum Switch:
| Pressure Media | Non-corrosive gases |
| Power Supply | 10.8 – 30 V DC, regulated |
| Current Consumption | 17 mA maximum @ 30 V DC |
| Transistor Output | N.O. 28 V DC, 80 mA Maximum |
| Analog Output | 1 ± 0.1 V~ 5 ± 0, 1 V DC |
| Accuracy At | ± 0.3% of measuring scale at constant temperature |
| Switch Configuration | 1 Adjustable hysteresis output – 1 analog output |
| Setting Method | Adjustable by Trimmer Pot |
| Hysteresis | A: 0 to 15% of the set value |
| Response time | 1 ms |
| Body Materials | Polyacetal and polycarbonate |
| Dielectric strength | 500 V AC, 1 minute |
| Operating Temperature | -20 to +70°C (storage: -20 to +80°C) |
| Operating Humidity | 35 ~ 85% RH (no condensation) |
| Electrical Connection | Cable (1.5 meters long) with 4 loose leads |
| Pneumatic Connection | R1/8 male with M5 female port |
| Weight | 50 g |
Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.