Equipment › ANVER Vacuum Components › Vacuum Switches and Sensors › JTSE electronic vacuum switch › JTSE-NPN Vacuum Switch

ANVER JTSE-NPN Electronic Vacuum Switch, NPN Output

JTSE-NPN converts vacuum level into a digital signal for PLCs and an analog output for on/off control. The ANVER standard unit is PNP.

Vacuum System Components

Vacuum and Pressure Switches
Electronic Vacuum Switch (JTSE-NPN)

JTSE-NPN electronic vacuum switch

The JTSE-NPN Electronic Vacuum Switch converts the vacuum level into digital output for connection to PLC systems as well as into analog output for the on/off control. The JTSE-NPN Switch will allow continuous feedback and adjustment capability over a 0 to 29.5 in Hg range. This switch features an NPN Open Collector Output Transistor Configuration. (For PNP configuration see ANVER Pressure Switch Model JTSE.)
NOTE: ANVER standard unit is PNP.

  • Calculation Range: -1/0 bars
  • Overpressure: +3 bars
Part Number
JTSE-NPN
JTSE-NPN electronic vacuum switch

The JTSE-NPN Electronic Vacuum Switch connects easily and conveniently to ANVER JB Series Vacuum Generators under the nozzle and muffler.

Specifications for JTSE Vacuum Switch:

Pressure MediaNon-corrosive gases
Power Supply10.8 – 30 V DC, regulated
Current Consumption17 mA maximum @ 30 V DC
Transistor OutputN.O. 28 V DC, 80 mA Maximum
Analog Output1 ± 0.1 V~ 5 ± 0, 1 V DC
Accuracy At± 0.3% of measuring scale at constant temperature
Switch Configuration1 Adjustable hysteresis output – 1 analog output
Setting MethodAdjustable by Trimmer Pot
HysteresisA: 0 to 15% of the set value
Response time1 ms
Body MaterialsPolyacetal and polycarbonate
Dielectric strength500 V AC, 1 minute
Operating Temperature-20 to +70°C (storage: -20 to +80°C)
Operating Humidity35 ~ 85% RH (no condensation)
Electrical ConnectionCable (1.5 meters long) with 4 loose leads
Pneumatic ConnectionR1/8 male with M5 female port
Weight50 g

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.

Contact us