Electric Hoist Track for Low-Ceiling Plants, 5T Rail

FullSharp hangs a 5T steel rail from the ceiling structure and runs an electric hoist along it for plants with low ceilings and floors already packed with machines. Rail sections join end to end so the line can be as long as the work needs, and because nothing stands on the floor, aisles and storage space stay fully clear for machines and carts.

The plant has a low ceiling and a floor already packed with machines; installing a crane with floor-mounted columns would take up the aisle and the storage space. Yet lifting work still needs to run along a long line.

FullSharp suspends a 5T rail from the ceiling structure and runs an electric hoist on it. The rail can be joined in multiple sections, so the line can be as long as needed, while the floor stays completely clear for machines and carts.

Ceiling-Mounted 5T Rail for Electric Hoist in the Plant

Ceiling-mounted 5T rail forming a running track for an electric hoist in the plant.

Installed Equipment

5T rail: formed steel rail, joined at flanges to extend the running line.
Ceiling suspension set: threaded rods and clamps bolted to the purlin, height-adjustable to keep the rail straight and level.
Hoist trolley: wheels run inside the rail track, carrying the electric hoist along the line.
End stops: mounted at both ends of the line to prevent the trolley from running past the limit.

Key Specifications

Rail model5T

Benefits for Your Plant

Floor stays clear

The entire system hangs from the ceiling, so the plant loses no floor space to columns.

Suits low-ceiling plants

The thin rail takes up little headroom while still leaving enough lifting stroke.

Easy to extend

Extending the line only requires adding another rail section and suspension set.

Actual Installation Photos

Ceiling-Mounted 5T Rail for Electric Hoist in the Plant - photo 1

Ceiling-Mounted 5T Rail for Electric Hoist in the Plant - photo 2

Ceiling-Mounted 5T Rail for Electric Hoist in the Plant - photo 3

Ceiling-Mounted 5T Rail for Electric Hoist in the Plant - photo 4

Ceiling-Mounted 5T Rail for Electric Hoist in the Plant - photo 5

Ceiling-Mounted 5T Rail for Electric Hoist in the Plant - photo 6

Click a photo to enlarge. 6-photo album taken on site.

Suitable Applications

Mechanical fabrication workshops
Machine maintenance areas
Industrial warehouses
Equipment assembly lines

Frequently asked questions

Can a hoist rail be installed without floor columns?

Yes. The rail hangs from the ceiling on threaded rods and clamps bolted to the purlins, so no columns stand on the floor. FullSharp checks the roof structure and load before fixing the suspension points.

Is a ceiling rail suitable for a low ceiling?

A thin formed rail takes little headroom while still leaving room for lifting. Hanger rods are height adjustable to keep the rail straight and level, which helps the trolley run smoothly.

How long can a ceiling hoist rail be?

Rail sections are joined at flanges, so the running line can be extended to match the length of the work area. End stops at both ends keep the trolley from running past the limit.

Similar projects

Installation Consulting for Your Plant

FullSharp checks the purlin structure and allowable suspended load, then measures the running line to divide the suspension points for the rail. Our technicians finalize the electric hoist type, lifting stroke, and how power is supplied to the trolley. Contact FullSharp to schedule a survey.

Ceiling-Mounted 5T Rail for an Electric Hoist in a Low-Ceiling Plant with No Floor Columns