Vietnam+84 332 839 268 Taiwan+886 3 451 8806 Send requestreply in 24 h

FullSharp · since 1991

Bench-mounted jib crane

Name: Bench-mounted jib crane
Brand: FullSharp

Overview

The Knight Global MJBA2000 bench-mounted jib crane suits workstations where the ceiling is not practical for an overhead crane. A single TR2000 rail rotates on a bench pedestal for wide tool coverage.

Knight MJBA2000 Bench-Mounted Jib Cranes are ergonomically designed to accommodate workstations where ceiling heights are inconvenient for an overhead crane system. It offers a large tool coverage area with a single rotating TR2000 Series Rail on a bench-mounted pedestal.

Knight Jib Cranes have Timken® Tapered Roller bearings to provide a smooth 360 degree rotation and have boom lengths available up to 5 ft. [1.52m] and under rail clearance heights of up to 6 ft. [1.8m].

General Information

Features

TR2000 Series Rail Only.
360° Roller Bearing.
Mix Jib Lengths: Up to 5 ft. [1.52m]
Max Under Rail Clearance height: Up to 6 ft. [1.8m].
Max Capacity: Up to 30 lbs. [13kg].

Note: Contact a Knight Representative for specific reach, height, and capacity calculations per application. Knight Load Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

Benefits

Eliminates need for overhead system.
Adjustable Rotation Stop.
Round post allows for 360° rotation.

Accessories

Load Trolleys 3

TRT2001Load Trolley

Max capacity: 550 lbs. [250kg]
Weight: 2 lbs. [0.90kg]
Jib type: TR2000 series

Details

Knight Global's TRT2001 transfers loads along the horizontal axis and suspends Knight Pneumatic Balancers and Fixtures and Festooning from Knight's TR2000 Series Aluminum Rail Systems.

Double-shielded wheel bearings keep dirt out, and do not require lubrication.
Prevents drag on the load trolley.
Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F.

CAD drawing

TRT2002Load Trolley with Bosses

Max capacity: 550 lbs [250kg]
Weight: 2.9 lbs [1.32kg]
Jib type: TR2000 series

Details

Knight Global's TRT2002 transfers loads along the horizontal axis and suspends Knight Pneumatic Balancers and Fixtures and Festooning from Knight's TR2000 Series Aluminum Rail Systems.

Fiberglass filled High Impact Nylon Wheels.
Side Guide Rollers with integrated bearings.

CAD drawing

TRT2003Load Trolley with Eye Hook

Max capacity: 550 lbs [250kg]
Weight: 3.7 lbs [1.68kg]
Jib type: TR2000 series

Details

Knight Global's TRT2003 transfers loads along the horizontal axis and suspends Knight Pneumatic Balancers and Fixtures and Festooning from Knight's TR2000 Series Aluminum Rail Systems.

This trolley has been superseded by TRT2203.

Fiberglass filled High Impact Nylon Wheels.
Side Guide Rollers with integrated bearings.

CAD drawing

End Caps / Stops 3

MRSA5070Mid-Rail Stop

Weight: 1 lbs [.45kg]

Details

Knight Global's MRSA5070 Mid-Rail Stop attaches to the inside of the TR2000 Series Rail. It is typically used to separate the working area of a bridge or runway and / or to prevent a bridge from over travel.

Attaches inside of the TR2000 Series Rail.
Separates the working area of a bridge or runway and/ or prevents a bridge from over travel.

CAD drawing

TRN2016End Cap

Weight: 0.4 lbs. [0.18kg]

Details

Knight Global's TRN2016 End Cap attaches to the end of the TR2000 Series Rail. It is primarily used as a dust cover for the TR2000 rail. The TRN2016 End Cap prevents an end truck or load trolley from exiting the rail, but is not to be used as a primary stop for the rail. When used in conjunction with a MRSA5070 Mid-Rail Stop, it will form a redundant stop for the rail system.

Primarily used as a dust cover.
Prevents an end truck or load trolley from exiting the rail.
When used with a MRSA5070 Mid-Rail Stop it forms a redundant stop.

CAD drawing

TRN2114Redundant End Cap

Weight: 1.1 lbs. [0.50kg]

Details

Knight Global's TRN2114 Redundant End Cap attaches to the end of the TR2000 Series Rail. It is primarily used to prevent an end truck or load trolley from exiting the rail. The TRN2114 is a combination of the TRN2016 End Cap and the MRSA5070 Mid-Rail Stop.

Inner MRSA5070 Mid-Rail Stop.
TRN2016 End Cap is used as a dust cover.
Prevents an end truck or load trolley from exiting the rail.

CAD drawing

Hose Trolleys 2

TRM2019Hose Trolley

Max capacity: 550 lbs. [250kg]
Weight: 1.2 lbs. [0.54kg]

Details

Knight Global's TRM2019 Hose Trolley transfers loads along the horizontal axis and carries festooning hose from Knight's TR2000 Series Aluminum Rail Systems. Knight Hose Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.

Fiberglass filled High Impact Nylon Wheels.
Side Guide Rollers with integrated bearings.
Double-Shielded bearings keep dirt out, and do not require lubrication.
Min/ Max Continuous Service Temp at 100% load: -20 degs. F to 248 degs. F.

CAD drawing

TRM2021Hose Trolley with Cable Saddle

Max capacity: 50 lbs. [22kg].
Weight: 3.0 lbs. [1.36kg]

Details

The TRM2021 Hose Trolley with Cable Saddle supports the electrical festooning for Knight's TR2000 Series Aluminum Rail Systems. The Cable Saddle has velcro straps that allow for fast and easy installation of electrical cables. It can support up to 2 in. [51mm] cables or hoses. Knight Hose Trolleys are manufactured from commercial grade pickled and oiled hot rolled steel with a tensile strength of ± 49 ksi and a yield point of ± 30 ksi.