ANVER Steel Plate Weight and Overhang Table

Use this table to find steel plate weight and the maximum overhang beyond the pads before the plate deflects 2 inches or 5 inches.

Weight and Overhang Table
Steel Plate

Steel Sheet and Plate Gauge	Decimal Equivalent inches	Weight lb/sq ft	Overhang ‘L’
			2 inch Deflection		5 inch Deflection
			in.	(cm)	in.	(cm)
26	0.0179	0.75	14	(35.5)	18	(45.7)
24	0.0239	1.00	17	(43.2)	21	(53.3)
22	0.0299	1.25	19	(48.3)	24	(61.0)
20	0.0359	1.50	20	(50.8)	26	(66.0)
19	0.0418	1.75	22	(55.9)	28	(71.1)
18	0.0478	2.00	24	(61.0)	30	(76.2)
16	0.0598	2.50	26	(66.0)	33	(83.8)
14	0.0747	3.13	30	(76.2)	37	(94.0)
13	0.0897	3.75	32	(81.3)	41	(104.1)
12	0.1046	4.38	35	(88.9)	44	(111.8)
11	0.1196	5.00	37	(94.0)	47	(119.4)
10	0.1345	5.63	40	(101.6)	50	(127.0)
8	0.1644	6.88	44	(111.8)	55	(139.7)
7	0.1793	7.50	46	(116.8)	58	(147.3)
3/16	0.1875	7.66	47	(119.4)	59	(149.9)
1/4	0.2500	10.21	54	(137.2)	68	(172.7)
5/16	0.3125	12.76	60	(152.4)	76	(193.0)
3/8	0.3750	15.32	66	(167.6)	84	(213.4)
7/16	0.4375	17.87	72	(182.9)	90	(228.6)
1/2	0.5000	20.42	77	(195.6)	97	(246.4)
9/16	0.5625	22.97	81	(205.7)	103	(261.6)
5/8	0.6250	25.53	86	(218.4)	108	(274.3)
11/16	0.6875	28.05	90	(228.6)	113	(287.0)
3/4	0.7500	30.63	94	(238.8)	118	(299.7)
7/8	0.8750	35.74	101	(256.5)	128	(325.1)
1	1.0000	40.84	108	(274.3)	137	(348.0)
* Use this table for carbon steel sheet and plate

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.