ANVER FT Series Flow Tubes and TT Series Transfer Tubes

FT Series adjustable flow tubes and transfer tubes

Air movers: TT Series material transfer tubes

Vietnam+84 332 839 268 Taiwan+886 3 451 8806 Send requestreply in 24 h

FullSharp · since 1991

Equipment › ANVER Vacuum Components › Air Powered Vacuum Pumps › FT and TT Air Movers

FT and TT Series air movers use compressed air to produce very high flow at a low vacuum level for porous loads, dust removal, cooling and inline transfer.

Request a quote

Air mover style vacuum pumps

Manufacturer PDF

ANVER FT Series air movers and flow tubes

Precision made air powered vacuum pumps with a very high flow at a low vacuum level for specialized applications

High vacuum and high output flow using minimal compressed air
The FT Series Adjustable Flow Tubes offer a cost effective method for producing high vacuum and high output flow using a minimal amount of compressed air.

High vacuum flow / material handling
When used as a vacuum, the FT Series can generate high amounts of flow to quickly remove large volumes of air. This is especially useful for handling porous material (e.g., foam or fabric) where leakage is a problem.

High output flow / blower
When used to produce high output flow, the FT Series is an ideal alternative to expensive electric blowers or raw compressed air lines. Made of aluminum to precise computer numerical control (CNC) machine tolerances. These pumps have an anodized finish for durability, and feature a straight-through bore design that allows material to move from end-to-end without clogging for maintenance-free operation.

Features
• High vacuum and high output flow
• Field adjustable to application
• Low air consumption
• Compact size
• Instant on/off
• No O-rings or gaskets
• No moving parts to clog
• Rugged design for extreme conditions
• Consistent performance
• Safe operation:

No electricity at pump
No heat generated
Explosion proof

Applications
• Air bearing
• Fume removal
• Cooling
• Drying
• Chip and dust removal
• Part ejection
• Automated sheet/paper feeders
• Assembly and palletizers
• Tank purging
• Inflation/deflation
• Conveyor transfer
• Porous pick and place
• Packing delicate or porous products
(e.g., foam or felt egg crate sheets, IV bags,
perforated metal, fan scrolls, circuit boards)

FT Series dimension drawing

Product Photo	Model Number	Bore ID in. (mm)	Air Usage* SCFM (l/min.)	Output* SCFM (l/min)	Max. Vac. in. Hg (mm Hg)	Amp- lification Ratio	A in. (mm)	B Barb in. (mm)	C Approx. in. (mm)	D in. (mm)	E Inlet Port	F Barb in. (mm)	G in. (mm)
	FT020 (CDF200H KVPCOF200H)	0.25 (6.3)	3 (85)	18 (340)	5 (127)	6:1	1.32 (33.4)	0.53 (13.5)	3.75 (95.3)	2.10 (53.5)	G 1/8″	1.00 (25.4)	0.94 (24.0)
	FT050 ** (CDF500H KVPCOF500H)	0.50 (12.7)	9 (255)	75 (2124)	3 (76)	8:1	1.90 (49.0)	1.00 (25.4)	4.50 (114.5)	2.13 (54.0)	G 1/4″	1.50 (38.1)	0.94 (24.0)
	FT075 (CDF750H KVPCOF750H)	0.75 (19.1)	9 (255)	110 (3115)	1.5 (38)	12:1	2.38 (60.4)	1.25 (31.8)	4.97 (126.0)	2.63 (66.7)	G 1/4″	2.00 (52.0)	0.94 (24.0)
	FT100 (CDF1000H KVPCOF1000H)	1.00 (25.4)	9 (255)	145 (4106)	1 (25)	16:1	2.38 (60.4)	1.50 (38.1)	4.97 (126.0)	2.53 (64.1)	G 1/4″	2.00 (52.0)	0.94 (24.0)

* Air usage and output are based on an input pressure of 80 PSIG.
** Note: Optional CLAMP51P requires tape wrap to fit tightly on FT050.

13600162 A

Product Photo

Model
Number

(B)
Optional Hose to Fit Exhaust Barb

(E)
Optional G to NPT Inlet Port Adapter

(F)
Optional Hose to Fit Incoming Barb

Optional Clamp Mount

FT020
(CDF200H
KVPCOF200H)

FT050 **
(CDF500H
CD500H
KVPCOF500H)

FT075
(CDF750H
KVPCOF750H)

FT100
(CDF1000H
KVPCOF1000H)

Manufacturer PDF

TT Series transfer tubes for pneumatic conveying

The TT Series Transfer Tubes offer a simple, effective, and low cost solution to perform an inline transfer of small or complex shaped objects, bulk material, and powders.

Highly efficient and compact, the TT Series creates an instantaneous and adjustable vacuum flow that is powered by compressed air. The straight-through, smooth bore design allows material to pass directly through the pump at high speeds without clogging. These transfer tubes are made of anodized aluminum and are available in 4 standard models with inside diameters from 3/8″ (9.5mm) to 1″ (25.4mm).

ANVER TT Series material transfer tubes

Features
• Instant on/off flow and quick setup
• No o-rings, gaskets, or flap valves
• Maintenance-free operation/no down time
• Compact size
• Made in USA
• Safe operation:

No electricity at pump
No heat generated
Explosion proof

Applications

Pneumatic conveying
Hopper loading
Bulk loading
Dust removal
Trim waste removal

TT Series dimension drawing

Product Photo	Model Number	Bore ID in. (mm)	Air Usage* SCFM (l/min)	Output* SCFM (l/min)	Max. Vacuum in. Hg (mm Hg)	Velocity ft/sec (m/sec)	A in. (mm)	B Barb in. (mm)	C in. (mm)	D in. (mm)	E Inlet Port
	TT03 (DF3-3 D3-3 KVPDF3-3)	0.375 (9.5)	10 (283)	15 (425)	6 (152)	395 (120)	1.25 (31.8)	0.75 (19.1)	3.75 (95.3)	0.50 (12.7)	G 1/8″
	TT05 (DF5-6 D5-6 KVPDF5-6)	0.500 (12.7)	24 (680)	30 (850)	6 (152)	360 (110)	1.50 (38.1)	1.00 (25.4)	5.75 (146.1)	0.63 (15.9)	G 1/4″
	TT07 (DF7-6 D7-6 KVPDF7-6)	0.750 (19.1)	48 (1359)	60 (1699)	8 (203)	325 (99)	2.00 (50.8)	1.25 (31.8)	8.00 (203.2)	1.00 (25.4)	G 1/4″
	TT10 (DF10-3 D10-3 KVPDF10-3)	1.00 (25.4)	48 (1359)	95 (2690)	6 (152)	290 (88)	2.25 (57.2)	1.50 (38.1)	8.00 (203.2	1.00 (25.4)	G 1/4″

Product Photo	Model Number	Optional Hose to Fit Both Barbs	Optional G to NPT Inlet Port Adapter	Optional Clamp Mount
	TT03 (DF3-3 D3-3 KVPDF3-3)
	TT05 (DF5-6 D5-6 KVPDF5-6)
	TT07 (DF7-6 D7-6 KVPDF7-6)
	TT10 (DF10-3 D10-3 KVPDF10-3)