Wall-Mounted Pneumatic Jib Crane Force Handle

The work area sits right against the wall, so adding a jib crane column would take up space needed for workbenches and pallets. The parts being lifted aren't very heavy, but the motion repeats many times a shift, tiring workers' arms quickly.

FullSharp installed a wall-mounted pneumatic jib crane, with the entire load carried by the wall bracket, leaving the floor completely clear. The force-sensing handle reads the operator's push: push up and the load rises, press down and it lowers, with no buttons needed.

Wall-Mounted Pneumatic Jib Crane with Force-Sensing Handle

Wall-mounted pneumatic jib crane with swing arm and force-sensing handle at the work station.

Equipment Installed

Wall bracket and mounting assembly: bolted to a load-bearing column or wall, taking up no floor space.
Swing arm: rotates around the pivot to sweep the work area, with a bearing joint for a light, smooth swing.
Pneumatic hoist: lifts and lowers with air, holds the load at any height, quiet and spark-free.
Force-sensing handle: a sensor reads the operator's hand force, so lifting speed follows the applied force for very natural handling.

Key Specifications

Mounting typeWall-mounted
DrivePneumatic
ControlForce-sensing handle

Benefits for the Plant

Floor stays clear

With no column anchored to the floor, carts, pallets and workers can move freely underneath.

Natural handling

The operator only lifts the part slightly, the system carries the weight while the hand simply guides direction.

Safe operation

Pneumatic drive produces no sparks, and the load holds in place when the handle is released, reducing drop risk.

Actual Installation Photos

Wall-Mounted Pneumatic Jib Crane with Force-Sensing Handle - photo 1

Wall-Mounted Pneumatic Jib Crane with Force-Sensing Handle - photo 2

Wall-Mounted Pneumatic Jib Crane with Force-Sensing Handle - photo 3

Wall-Mounted Pneumatic Jib Crane with Force-Sensing Handle - photo 4

Wall-Mounted Pneumatic Jib Crane with Force-Sensing Handle - photo 5

Wall-Mounted Pneumatic Jib Crane with Force-Sensing Handle - photo 6

Wall-Mounted Pneumatic Jib Crane with Force-Sensing Handle - photo 7

Wall-Mounted Pneumatic Jib Crane with Force-Sensing Handle - photo 8

Wall-Mounted Pneumatic Jib Crane with Force-Sensing Handle - photo 9

Wall-Mounted Pneumatic Jib Crane with Force-Sensing Handle - photo 10

Wall-Mounted Pneumatic Jib Crane with Force-Sensing Handle - photo 11

Wall-Mounted Pneumatic Jib Crane with Force-Sensing Handle - photo 12

Wall-Mounted Pneumatic Jib Crane with Force-Sensing Handle - photo 13

Wall-Mounted Pneumatic Jib Crane with Force-Sensing Handle - photo 14

Wall-Mounted Pneumatic Jib Crane with Force-Sensing Handle - photo 15

Click a photo to enlarge. Album of 15 photos taken on site.

Suitable Applications

Mechanical assembly stations against the shop wall
Inspection and repair areas for machine parts
Packaging lines needing repeated lifting
Electronics production requiring precise handling

Installation Consultation for Your Plant

FullSharp checks the strength of the wall or column before confirming the bracket position — the most critical step for a wall-mounted unit. Our engineers measure the working radius and ceiling height to select the right arm length. Just tell us about the load and your floor plan, and we'll come out for a survey.