Equipment › ANVER vacuum lifters › LBA lifting bail assemblies › Compressed air set-up

How to set up ANVER compressed-air powered vacuum lifters

Set-up is as simple as hanging the unit from a crane hook and attaching compressed air to the vacuum generator!

ANVER’s own vacuum pumps are utilized as they operate with some of the lowest flow and pressure requirements in the industry. ANVER vacuum lifters require a fairly low supply of dry, clean, oil-free shop air. Our full line of powered vacuum generators come with a variety of pneumatic specifications. The required pneumatic compressed air pressure and flow requirements are located on the individual model web page.

Note: All generators are supplied with an incoming air supply shut-off slide valve in addition to the control valve(s).

Request a quote

ANVER VPF-57-AIR compressed-air powered vacuum lifter

These are the main items to keep in mind

Load overhang icon

Make sure you have selected a vacuum lifter with adequate capacity to lift your heaviest load, and enough vacuum cups to support your longest, widest and thinnest load. See how we calculate this.

Crane hook icon

Make sure your hoist and crane have adequate lifting capacity.
Remember, you need to deduct the vacuum lifter weight from the hoist and crane to get your overall capacity.

Headroom icon

Check if you have adequate headroom in your application for the lifter and the load being lifted.

Spare and replacement parts

Have you ordered key spare parts such as vacuum cups or seals? While they do last, this will probably be the first item needing service.

Vacuum
cups and seals

Vacuum
filters and elements

Vacuum
hose and fittings

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.