VN EN TW
FullSharp
Vietnam+84 332 839 268Taiwan+886 3 451 8806Send requestreply in 24 h
About
Equipment
What do you need to lift
Completed projects
Catalogue
Contact
VNENTW
FullSharp · since 1991

Equipment › ANVER Vacuum Components › Level Compensators and Suspensions › SLSA Mounting Brackets

ANVER SLSA Level Compensator Brackets for Aluminum Extrusions

Aluminum brackets fit cups and SLSA spring level compensators to extrusion frames simply and at low cost, and can be adjusted and locked.

Request a quote

Vacuum Cups and Suction Cups

Suction Cup Level Compensator Mounting Brackets
Universal SLSA Mounting Brackets for Aluminum Extrusions of All Types

ANVER SLSA mounting bracket

Dimension drawing, ANVER SLSA mounting bracket

We designed these brackets to allow our cups and suspensions to be integrated into aluminum extrusion systems in a simple, low cost manner. This type of bracket is not available from other companies because it is specific to our vacuum cup suspensions.

Our brackets are made of tumbled and anodized 1/4″ (6 mm) aluminum, and our ANVER SLSA Series Spring Level Compensators fit right into the end. These brackets are designed to be used with any number of aluminum extrusion systems manufactured by other companies. Our brackets are designed for either inch or metric, 25 mm, 28 mm and approx. 40 mm sizes. Simply add two typical 8 mm bolt clamps (not included) for your particular brand to easily make an EOAT (end of arm tool). The brackets can be adjusted and locked into position on the top or bottom of the extrusion rail.

Dimension drawing, SLSA-1
SLSA-1 in Action
Dimension drawing, SLSA-1
SLSA-2 in Action
ANVER SLSA mounting bracket SLSA-1
Mounting Components
Fit Popular “EOAT”
Aluminum Extrusions

Brackets for SLSA-1 Suspensions

Product
Photo		Part
Number		A
in.
(mm)
Hole Diameter		B
in.
(mm)		C
in.
(mm)		DescriptionLevel
Compensator
Suspensions		Weight
lb.
(grams)
ANVER SLSA mounting bracket SLSA-1285002300.48
(12.7)		2.00
(50.8)		5.00
(127)		Mounting Bracket for SLSA-1 Alum – 2 x 5 x 0.48ANVER SLSA mounting bracket SLSA-10.170
(77)
ANVER SLSA mounting bracket SLSA-1285002320.48
(12.7)		1.00
(25.4)		4.00
(102)		Mounting Bracket for SLSA-1 Alum – 1 x 4 x 0.48ANVER SLSA mounting bracket SLSA-10.141
(64)

Brackets for SLSA-2 Suspensions

Product
Photo		Part
Number		A
in.
(mm)
Hole Diameter		B
in.
(mm)		C
in.
(mm)		DescriptionLevel
Compensator
Suspensions		Weight
lb.
(grams)
ANVER SLSA mounting bracket SLSA-2285002390.64
(16.2)		2.00
(50.8)		5.00
(127)		Mounting Bracket for SLSA-2 Alum – 2 x 5 x 0.64ANVER SLSA mounting bracket SLSA-20.166
(75)
ANVER SLSA mounting bracket SLSA-2285002400.64
(16.2)		1.00
(25.4)		4.00
(101.6)		Mounting Bracket for SLSA-2 Alum – 1 x 4 x 0.64ANVER SLSA mounting bracket SLSA-20.137
(62)

Brackets for SLSA-3 Suspensions

Product
Photo		Part
Number		A
in.
(mm)
Hole Diameter		B
in.
(mm)		C
in.
(mm)		DescriptionLevel
Compensator
Suspensions		Weight
lb.
(grams)
ANVER SLSA mounting bracket SLSA-3285002310.75
(19.0)		2.00
(50.8)		5.00
(127)		Mounting Bracket for SLSA-3 Alum – 2 x 5 x 0.75ANVER SLSA mounting bracket SLSA-30.163
(74)
ANVER SLSA mounting bracket SLSA-3285002330.75
(19.0)		1.00
(25.4)		4.00
(102)		Mounting Bracket for SLSA-3 Alum – 1 x 4 x 0.75ANVER SLSA mounting bracket SLSA-30.135
(61)

Brackets for SLSA-4 Suspensions

Product
Photo		Part
Number		A
in.
(mm)
Hole Diameter		B
in.
(mm)		C
in.
(mm)		DescriptionLevel
Compensator
Suspensions		Weight
lb.
(grams)
ANVER SLSA mounting bracket SLSA-4285005800.9
(23)		100
(25.4)		4.00
(102)		Mounting Bracket for SLSA-4ANVER SLSA mounting bracket SLSA-40.127
(58)

Note: Custom mounting brackets can be made on request when the specifications above do not fit your design requirements.

Adjustable SLSA Suspension Bracket Hanger Kits for 40 mm Aluminum Extrusions

Dimension drawing, ANVER SLSA mounting bracket

These Suspension Bracket Hanger Kits are designed to allow our cups and suspensions to be integrated into aluminum extrusion systems in a simple, low cost manner. This type of suspension bracket hanger kit is not available from other companies because it is specific to our vacuum cup suspensions.

Our suspension bracket hanger kits are made of tumbled and anodized 1/4″ aluminum, and our ANVER SLSA Series Spring Level Compensators fit right into the end. These brackets are designed for approx. 40 mm size aluminum extrusions. The brackets can be adjusted and locked into position on the top or bottom of the extrusion rail. Mounting plates for this style are also available.

Bracket Hangers for SLSA-1 Suspensions

Product
Photo		Part
Number		A
in.
(mm)
Hole Diameter		B
in.
(mm)		C
in.
(mm)		DescriptionLevel
Compensator
Suspensions		Weight
lb.
(grams)
Dimension drawing, SLSA-1723000400.48
(12.2)		–3.15
(80)		Suspension Bracket Hanger Kit for SLSA-1 SeriesANVER SLSA mounting bracket SLSA-10.324
(147)
Dimension drawing, SLSA-1285002430.48
(12.2)		–3.15
(80)		Mounting Plate to Mount SLSA-1 Series to Aluminum ExtrusionANVER SLSA mounting bracket SLSA-10.194
(85)

Bracket Hangers for SLSA-2 Suspensions

Product
Photo		Part
Number		A
in.
(mm)
Hole Diameter		B
in.
(mm)		C
in.
(mm)		DescriptionLevel
Compensator
Suspensions		Weight
lb.
(grams)
Dimension drawing, SLSA-2723000320.48
(12.2)		–3.15
(80)		Suspension Bracket Hanger Kit for SLSA-2 SeriesANVER SLSA mounting bracket SLSA-20.323
(147)
Dimension drawing, SLSA-2285002440.64
(16.3)		–3.15
(80)		Mounting Plate to Mount SLSA-2 Series to Aluminum ExtrusionANVER SLSA mounting bracket SLSA-20.193
(88)

Bracket Hangers for SLSA-3 Suspensions

Product
Photo		Part
Number		A
in.
(mm)
Hole Diameter		B
in.
(mm)		C
in.
(mm)		DescriptionLevel
Compensator
Suspensions		Weight
lb.
(grams)
Dimension drawing, SLSA-3723000410.75
(19.0)		–3.15
(80)		Suspension Bracket Hanger Kit for SLSA-3 SeriesANVER SLSA mounting bracket SLSA-30.305
(138)
Dimension drawing, SLSA-3285002450.75
(19.0)		–3.15
(80)		Mounting Plate to Mount SLSA-3 Series to Aluminum ExtrusionANVER SLSA mounting bracket SLSA-30.175
(79)

Note: Custom mounting brackets can be made on request when the specifications above do not fit your design requirements.

Related pages

Fittings overviewBall Swivel ConnectorsSLSA-105SP Spring SuspensionCup Set-Up for Narrow LoadsAdjustable Suspension Brackets

Need an ANVER system for your load?

Send photos, weight and dimensions of the load. FullSharp represents ANVER and replies with a configuration and quote within 24 hours.

Contact us