Vietnam+84 332 839 268 Taiwan+886 3 451 8806 Send requestreply in 24 h

VN EN TW

FullSharp · since 1991

FS-C roll lifter

LoadAluminium, copper and steel coils
Coil flip0–90° electric, worm gear drive
Vacuum pumpOil-free rotary vane, 7 or 8.4 m³/h
Suction cupAluminium alloy base, multi-chamber, max. 700 kg suction force
PowerAC mains to local voltage, continuous duty

FS-C vacuum coil lifter for aluminium, copper and steel coils, 0–90° electric flip

The FS-C series is used for damage-free handling of coils such as aluminium, copper and steel coils. A high-precision worm gear drive turns the coil electrically from 0 to 90°.

A high-flow vacuum pump from an internationally known brand gives fast suction and high productivity, and operation is simple and convenient. The lifter runs on AC mains power, so it suits long periods of continuous work.

The suction cup can be split into several chambers, each controlled separately, so one lifter can handle coils with different outside diameters.

FS-C vacuum coil lifter with 0-90 degree flip

**Holding an aluminium coil upright, cup on the coil face**

**1,100 kg version on a large-diameter coil**

Specifications

Item	Value
Load	Aluminium coils, copper coils, steel coils
Coil flip	0–90° electric, high-precision worm gear drive with reducer
Vacuum pump	Rotary vane, oil-free, 0.22 or 0.26 kW, 7 or 8.4 m³/h
Suction cup	Custom made by the factory, aluminium alloy base, several separately controlled chambers, maximum suction force 700 kg
Power supply	AC mains, built for the voltage at the installation site
Electrical parts	Power switches and solenoid valves from internationally known brands, international certifications
Carried by	Pillar jib crane, wall jib crane, overhead track crane or forklift
Rated loads on the lifters shown	200 kg, 250 kg, 500 kg, 1,100 kg

There is no fixed model list for FS-C: each lifter is built for the actual coil weight and diameters in your plant. For a quotation, please give the coil material, outside diameter, bore, width and the weight of the heaviest coil.

Main components

Vacuum pump

Rotary vane type, oil-free / 0.22 or 0.26 kW, 7 or 8.4 m³/h / High flow with less energy / Lowest vibration and noise level

Other spare parts

Power switches, solenoid valves etc. from internationally known brands / International certifications / Low failure rate, durable

Reducer

Provides the 0–90° flip / Small size / Low noise / Stable output

Vacuum suction cup

Custom made by the factory / Aluminium alloy base plate / Maximum suction force 700 kg / For aluminium coils, composite panels, glass and other workpieces

On-site photos

**250 kg version holding an aluminium coil upright**

**Mounted on a stacker, picking a flat aluminium coil from a pallet**

**Pump-on-frame version, round cup on a flat coil**

**Under a pillar jib crane, moving coils in the workshop**

**200 kg version turning a slit aluminium coil upright**

**Turning a slit aluminium coil next to the coil stack**

Advantages

Damage-free coil handling

The FS-C series is designed for damage-free handling of a wide range of coils, including aluminium, copper and steel, giving an efficient and safe way to lift coils in production.

0–90° electric flip, high-flow pump

The high-precision worm gear drive turns the coil electrically from 0 to 90°, giving precise control and easy manoeuvring during the lift. The high-flow vacuum pump from an internationally known brand picks up fast, with large flow and high efficiency, so coils are handled quickly and smoothly and overall operating efficiency goes up.

Simple controls, continuous duty

The controls are compact and intuitive, so operation is simple. The AC mains connection lets the lifter run for long periods without stopping to charge or for maintenance, so lifting work carries on steadily and reliably.

Suits many kinds of coil

Whether you handle aluminium, copper, steel or other coils, the lifter adapts to the job and works in a wide range of industrial environments.

Power supply and suspension

FS-C must be connected to AC mains power. Supply voltages differ from site to site, so please tell us the voltage at your plant when ordering and the lifter will be built for it.

The lifter can be used with a pillar jib crane, a wall jib crane or an overhead track crane, or mounted on a forklift.